• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.34-35
• /
• 2014

탄소는 부식되지 않고 친환경적이며 물리화학적 안정성 및 내마모성 등 많은 장점을 가지고 있어 많은 연구들이 진행 되고 있다. 하지만 탄소 박막은 전도도가 낮은 단점을 가지고 있다. 본 연구에서는 탄소 박막의 전도성과 플라즈마 변수와의 상관관계를 규명 하고자 하였다. 박막의 특성은 X-ray Diffraction (XRD), Hall measurement, Contact angle, Raman spectroscopy 등의 분석기기를 사용하여 측정하였고 그 결과 DC보다 Pulse DC를 사용할 때 더 좋은 전기적 특성을 나타내었다.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.113-124
• /
• 2018

In the present paper, we have considered a layered medium of two semi-infinite nonlocal elastic solids with intermediate transversely isotropic magnetothermoelastic solid. The intermediate slab is of uniform thickness with the effects of two temperature, rotation and Hall current and with and without energy dissipation. A plane longitudinal or transverse wave propagating through one of the nonlocal elastic solid half spaces, is made incident upon transversely isotropic slab and it results into various reflected and refracted waves. The amplitude ratios of various reflected and refracted waves are obtained by using appropriate boundary conditions. The effect of nonlocal parameter on the variation of various amplitude ratios with angle of incidence are depicted graphically. Some cases of interest are also deduced.

• Steel and Composite Structures
• /
• v.27 no.4
• /
• pp.439-451
• /
• 2018

In the present investigation, a plane P (longitudinal) wave is made incident upon a transversely isotropic magnetothermoelastic solid slab of uniform thickness, interposed between two different semi-infinite viscoelastic solids. The transversely isotropic magnetothermoelastic sandwiched layer is homogeneous with combined effects of two temperature, rotation and Hall current in the context of GN Type-II and Type-III (1993) theory of thermoelasticity. The amplitude ratios of various reflected and refracted waves are obtained by using appropriate boundary conditions. The effect of energy dissipation on various amplitude ratios of longitudinal wave with angle of incidence are depicted graphically. Some cases of interest are also deduced from the present investigation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1507-1510
• /
• 2012

본 논문은 EPS(전자식 파워 스티어링)에 사용되는 Torque and Angle sensor 의 절대각 신뢰성 보증 방식에 관한 것으로, Inductive 방식의 센서에서 절대각 신호 신뢰성 보증에 대한 효과적인 방법을 제시한다. 전동식 파워 스티어링 시스템의 ECU(전자제어유닛)는 조타각도를 출력하는 2 개의 소자에서 버니어 알고리즘을 통해 360 도 이상의 멀티 조타각을 인식하게 된다. 토크&조향각 센서는 절대 조향각을 계산하는 1 개의 Hall IC 소자 신호와, 상대 조향각을 계산하는 ASIC 소자 신호를 사용하여 멀티 조타각을 인식한다. 인식된 조타각이 추가적인 검증 절차 없이 제어에 사용된다면, 센서의 이상 발생 시에 운전자의 조타감을 불편해질 수 있고, 나아가서는 차량사고의 위험을 발생시킬 수 있다.따라서 차량 거동 시 절대 조향각의 신뢰성 검증은 제어와 동시에 항상 요구되어야 한다. 특히, 유럽/미국 업계의 ISO 26262 표준 도입에 따라 절대 조향각의 높은 신뢰성이 요구된다. 본 논문에서는 이러한 요구사항을 만족하기 위해 측정된 절대각 신호를 기준으로 상대각 신호 2 개를 측정에 사용하고, Driving 시에도 절대각 기준의 신뢰도 향상을 위해 절대각 신호 1 개를 비교기로 사용한다. 최적화된 에러 기준을 근거로 절대 조향각 신호의 신뢰성을 보장하는 방법을 제안한다. 이러한 방법을 적용한다면, 정확하고 안정적으로 조타각을 결정함으로써 EPS 안전성 확보에 도움을 줄 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2008

The purpose of this study is to examine the species of wooden members used in the Youngsanjeon Hall of the Sucknamsa temple in Anseong, Korea. Ninety-five wood samples from pillars, head-penetrating ties, beams, corner rafter, rafter, floor board and other wood members were identified. Seven species identified were hard pine, exotic pine, Zelkova serrata, Ginkgo biloba, Diospyros, Quercus(Cerrus) and Pyrus spp. In the case of pillars, eight were hard pines and the others Zelkova and Pyrus. Species of angle rafter were Ginkgo biloba and Zelkova. and those of beams were one hard pine and one Zelkova. Two purlin samples were Quercus(Cerrus) and rafters were hard pines except one Ginkgo and one exotic pine. Roof-filling timbers were identified as Zelkova and Diospyros spp. The other samples of roof-filling timbers were all identified as hard pines. The use of Ginkgo and several hardwoods in addition to hard pines may indicate supply of local logs near the Sucknamsa temple.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.280-283
• /
• 2007

The first grid-connected, building-integrated transparent amorphous silicon photovoltaic installation has been operated since October 2004 in Yongin, Korea. The 2.2kWp transparent PV system was applied to the facade of entrance hall in newly constructed KOLON E&C R&D building. The PV module is a nominal 0.98m ${\times}$ 0.95m, 10% transparent, laminated, amorphous(a-Si) thin-film device rated at 44 Wp per module. To demonstrate the architectural features of thin film PV technologies for daylighting application, transparent PV modules are attached to the building envelope with the form of single glazed window and special point glazing(SPG) frames. Besides power generation, the 10% transmittance of a-Si PV module provides very smooth natural daylight to the entrance hall without any special shading devices for whole year. The installation is fully instrumented and is continuously monitored in order to allow the performance assessment of amorphous silicon PV operating at the prevailing conditions. This paper presents measured power performance data from the first 12 months of operation. For the first year, annual average system specific yield was just 486.4kWh/kWp/year which is almost half of typical amorphous silicon PV output under the best angle and orientation. It should be caused by building orientation and self-shading of adjacent mass. Besides annual power output, various statistical analysis was performed to identify the characteristics of transparent thin film PV system.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.272-276
• /
• 1994

A new Galvanomagnetic electrorootive force effect of $Ni_{53}-Fe_{47}$ thin films is studied. The dependence of this effect on $\theta$, angle between the current and the magnetic field, is found to be the form of sin $2\theta$, in contrast with that of the magneto resistance effect cas $2\theta$ and that of the Hall effect sin $\theta$. Property of this effect is that lthe rate of the voltage variation depending on the magnetic field is extremely large as compared with the magnetiresistance effect. It is theoretically confirmed that this effect is well understood on the basis of the two carrier types model.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.382-387
• /
• 2005

Polyvinylidene fluoride (PVDF) surface was irradiated and became superhydrophilic by low energy (180 eV) and high flux $(\~10^{15}/cm{\cdot}s)$ ion beam. As an ion source, a closed electron Hall drift thruster of $\phi=70mm$ outer channel size without grid was adopted. Ar, $O_2$ and $N_2O$ were used for source gases. When $N_2O^+$ and $O_2^+$ reactive gas ion beam were irradiated with the ion fluence of $5\times10^{15}/cm^2$, the wetting angle for deionized water was drastically dropped from $61^{\circ}\;to\;4^{\circ}\;and\;2^{\circ}$, respectively. Surface energy was also increased up to from 44 mN/m to 81 mN/m. Change of chemical component in PVDF surface was analyzed by x-ray photoelectron spectroscopy. Such a great increase of the surface energy was intimately related with the increase of hydrophilic group component in reactive ion irradiated PVDF surfaces. By using an atomic force microscopy, the root-mean-square of surface roughness of ion irradiated PVDF was not much altered compared to that of pristine PVDF.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.286-286
• /
• 2011

최근 폴리머를 기판으로 하는 Flexible TFT (thin film transistor)나 3D-ULSI (three dimensional ultra large-scale integrated circuit)에서 높은 에너지 소비효율과, 빠른 반응 속도를 실현 시키기 위해 낮은 비저항(resistivity)을 가지며, 높은 홀 속도(carrier hall mobility)를 가지는 다결정 반도체 박막(poly-crystalline thin film)을 만들고자 하고 있다. 이를 실현 시키기 위해서는 높은 온도에서 장시간의 열처리가 필요하며, 이는 폴리머 기판의 문제점을 야기시킬 뿐 아니라 공정시간이 길다는 단점이 있었다. 이에 반도체 박막의 재결정화 온도를 낮춰주는 metal (Al, Ni, Co, Cu, Ag, Pd etc.,)을 이용하여 결정화 시키는 방법이 많이 연구 되어지고 있지만, 이 또한 재결정화가 이루어진 반도체 박막 안에 잔여 금속(residual metal)이 존재하게 되어 비저항을 높이고, 홀 속도를 감소시키는 단점이 있다. 이에 본 실험은 HiPIMS (High power impulse magnetron sputtering)와 PIII and D (plasma immersion ion implantation and deposition) 공정을 복합시킨 프로세스로 적은양의 금속이온주입을 통하여 재결정화 온도를 낮췄을 뿐 아니라, 잔여 하는 금속의 양도 매우 적은 다결정 반도체 박막을 만들 수 있었다. 분석 장비로는 박막의 결정화도를 측정하기 위해 GAXRD (glancing angle X-ray diffractometer)를 사용하였고, 잔여 하는 금속의 양과 화학적 결합 상태를 알아보기 위해 XPS를 통해 분석을 하였다. 마지막으로 홀 속도와 비저항을 측정하기 위해 Hall measurement와 Four-point prove를 사용하였다.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.17-24
• /
• 2009

The Friction Stir Welding(FSW) has mainly been used for making butt joints in Al alloys. Development of Friction Stir Lap Welding(FSLW) would expand the number of applications. Microstructure of FSLW in A5052-H112 alloy was investigated under varying rotation and welding speed. As the rotation speed was increased and the welding speed was decreased, a amount of heat was increased. As a result, bead interval was narrower, bead width are larger, and experimental bead interval was almost similar to theoretical bead interval. Typical microstructures of FSLW A5052-H112 alloy consist of three zones, including Stir Zone(SZ), Thermo-Mechanically Affected Zone(TMAZ) and Heat Affected Zone(HAZ). As a amount of heat was increased, average grain size was larger in three zones. Nevertheless, the aspect ratio was almost fixed for FSLW conditions. The misorientation of SZ, HAZ and TMAZ was examined. A large number of low angle grain boundaries, which were formed by severe plastic deformation, were showed in TMAZ as comparison with SZ and HAZ. Microhardness distribution was high in order of BM, SZ, TMAZ, and HAZ. The Micro-hardness distribution in HAZ, TMAZ of upper plate were lager than lower plate. Relationship between average grain size and microhardness was almost corresponded to Hall-Petch equation.