• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.93-102
• /
• 2014

Recently the interest in permanent magnet alternating motor using for electric compressor become great. Especially the research on Interior Permanent Magnet Motor has been doing actively for its advantages in the energy density and the efficiency. In order to control the output of motor to the desired value, the current control or speed control of motor are required. The accurate detection of rotor position and speed information are necessary for the control of motor. In general, the encoder, hall sensor, and resolver are used to obtain the information of motor position and speed and the speed detection algorithm, M/T method, is applied. However, the M/T method causes the error depending on rotor speed. Therefore, this M/T speed detection method is not perfect. In this paper, it is proposed that the PI control with a 1st transfer function and the integration element between velocity and position are composed in series and this feeds back to the reference value of position angle. The proposed algorithm is a function of the integral elements 2nd term, speed element, is used as an output. Thus, it is possible to detect the correct speed by configuring like the mechanical structure similarly. The proposed algorithm is verified by using PSIM DLL and is applied to the BLAC motor drive. And also it is confirmed that this system estimates the accurate speed regardless of rotor speed changes. As a example, the experimental results and simulations shows that the proposed method is very effective.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.687-694
• /
• 2015

A photoluminescence (PL) imaging method using a vision camera was employed to inspect InGaN/GaN quantum-well light-emitting diode (LED) epi-wafers. The PL image revealed dark spot defective regions (DSDRs) as well as a spatial map of integrated PL intensity of the epi-wafer. The Shockley-Read-Hall (SRH) nonradiative recombination coefficient increased with the size of the DSDRs. The high nonradiative recombination rates of the DSDRs resulted in degradation of the optical properties of the LED chips fabricated at the defective regions. Abnormal current-voltage characteristics with large forward leakages were also observed for LED chips with DSDRs, which could be due to parallel resistances bypassing the junction and/or tunneling through defects in the active region. It was found that the SRH nonradiative recombination process was dominant in the voltage range where the forward leakage by tunneling was observed. The results indicated that the DSDRs observed by PL imaging of LED epi-wafers were high density SRH nonradiative recombination centers which could affect the optical and electrical properties of the LED chips, and PL imaging can be an inspection method for evaluation of the epi-wafers and estimation of properties of the LED chips before fabrication.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.15 no.1
• /
• pp.23-32
• /
• 2009

Among welfare facilities for the elderly, necessity for the elderly welfare with diverse advantages is rising in the Small-scale Elderly Care Facilities. The government is expecting great demand in the future. However, current the Facilities lack construction plans that consider characteristics of the elderly. Accordingly, 14 case facilities located in JeollaNamdo and Gwangju were selected to comprehensively analyze the circulation of seniors at care facilities by computing spatial depth and visible area variables. As a result of this study, average spatial depth of bathroom, resting room, physical therapy room and dining hall that seniors frequently get in contact with was found to be deep, but visible area appropriate for the function of space was not available. It showed that the circulation for the elderly was deep spatially and long physically, and the spatial rank along circulation which is perceived visually by the admitted the elderly was clear, thus, providing them abundant visual experience supported by high openness as they move from private space to public space. The obtained visibility, however, was observed not to be matched with the function of each space. Since the Small-scale Elderly Care Facilities require various spaces within small surface area, actual functions of each space must be taken into consideration with hierarchical space organization to obtain an environment that stimulates senses such as vision and hearing. In addition, since the circulation of seniors using facilities must consider aging characteristics and delicate care on spatial depth and physical distances, in-depth studies on planning of the circulation in care facilities are deemed necessary.

• Journal of Surface Science and Engineering
• /
• v.49 no.1
• /
• pp.40-45
• /
• 2016

Recently, $Bi_2Te_3$-based alloys are the best thermoelectric materials near to room temperature, so it has been researched to achieve increased figure of merit(ZT). Ternary compounds such as Bi-Te-Se and Bi-Sb-Te have higher thermoelectric property than binary compound Bi-Te and Sb-Te, respectively. Compared to DC plating method, pulsed electrodeposition is able to control parameters including average current density, and on/off pulse time etc. Thereby the morphology and properties of the films can be improved. In this study, we electrodeposited n-type ternary Cu-doped $Bi_2(Te-Se)_3$ thin film by modified pulse technique at room temperature. To further enhance thermoelectric properties of $Bi_2(Te-Se)_3$ thin film, we optimized Cu doping concentration in $Bi_2(Te-Se)_3$ thin film and correlated it to electrical and thermoelectric properties. Thus, the crystal, electrical, and thermoelectric properties of electrodeposited $Bi_2(Te-Se)_3$ thin film were characterized the XRD, SEM, EDS, Seebeck measurement, and Hall effect measurement, respectively. As a result, the thermoelectric properties of Cu-doped $Bi_2(Te-Se)_3$ thin films were observed that the Seebeck coefficient is $-101.2{\mu}V/K$ and the power factor is $1412.6{\mu}W/mK^2$ at 10 mg of Cu weight. The power factor of Cu-doped $Bi_2(Te-Se)_3$ thin film is 1.4 times higher than undoped $Bi_2(Te-Se)_3$ thin film.

• Korean Journal of Materials Research
• /
• v.17 no.10
• /
• pp.509-515
• /
• 2007

In order to fabricate adhesiveless 2-layer flexible copper clad laminate (FCCL) used for COF (chip on film) with high peel strength, polyimide (PI; Kapton-EN, $38\;{\mu}m$) surface was modified by reactive $O_2^+$ and $N_2O^+$ ion beam irradiation. 300 mm-long linear electron-Hall drift ion source was used for ion irradiation with ion current density (J) higher than $0.5\;mA/cm^2$ and energy lower than 200 eV. By vacuum web coating process, PI surface was modified by linear ion source and then 10-20 nm thick Ni-Cr and 200 nm thick Cu film were in-situ sputtered as a tie layer and seed layer, respectively. Above this sputtered layer, another $8-9{\mu}m$ thick Cu layer was grown by electroplating and subsequently acid and base resistance and thermal stability were tested for examining the change of peel strength. Peel strength for the FCCLs treated by both $O_2^+$ and $N_2O^+$ ion irradiation showed similar magnitudes and increased as the thickness of tie layer increased. FCCL with Cu (200 nm)/Ni-Cr (20 nm)/PI structure irradiated with $N_2O^+$ at $1{\times}10^{16}/cm^2$ ion fluence was proved to have a strong peel strength of 0.73 kgf/cm for as-received and 0.34 kgf/cm after thermal test.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.53-60
• /
• 2018

In particular, the investigation of tendons in PSC Box Girder Bridge should be done in a systematic way. It is important to identify preventative maintenance activities that should be carried out in order to analyze the risk factors by type of representative tensions and to reduce risks in the long term. However, in the current maintenance system, various methodologies for investigating and repairing tensions have been studied, but it is difficult to investigate precisely tensions. Therefore, to apply the risk assessment for screening of tensions to the domestic PSC Box Bridge, we presented a risk matrix evaluation index that is consistent with the state assessment and maintenance system.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.558-567
• /
• 2019

When used for broadcasting, multipurpose halls need to accommodate various types of programs such as speeches, Korean traditional music, musicals, pop music, and concerts. Therefore, multipurpose halls must meet a wide range of electric and architectural acoustic demands. However, there are few ways to alter acoustic environments for multipurpose halls, given these different demands. The current study investigates the effects of banners on acoustic environments in the presence of an acoustic shell or electric acoustic system. The results indicate that the installation of a 15% banner of wall area could vary the range of reverberation time ($T_{30}$) by 0.12 s, EDT (Early Decay Time) by 0.15 s, clarity of music ($C_{80}$) by 0.76 dB, and clarity of speech ($D_{50}$) by 6.43 % under different measurement circumstances. A computer simulation that enlarges the banner size to 40 % of the wall area varies the reverberation time from 0.11 s to 0.55 s depending on the room environment.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.1
• /
• pp.17-33
• /
• 2019

The purpose of this study is to understand the present status of the international textile fashion conventions and the Korean textile fashion conventions in order to secure competitiveness in the textile fashion industry and to discover the satisfaction of the convention and to develop an improvement plan of the current textile and fashion conventions in Korea. For the method of study, five representative conventions of domestic and foreign textiles and fashion were selected and case analyses were conducted focusing on relevant reports. Also, the satisfaction and improvement of the conventions for companies, buyers and visitors attending the Preview in Seoul(PIS) convention were surveyed. The first result of the study was that international textile and fashion conventions have clarified their identity according to changes in the market environment and buyer's interest. For example, the professional exhibition changed the nature of the comprehensive convention or made it easier for many related businesses and buyers to attend the convention by sharing the same convention period and location with other conventions. In addition, the convention hall has been constructed to display promising items, such as eco-friendly materials and smart materials. Second, participating companies, buyers and visitors of the Preview in Seoul (PIS) convention were generally satisfied with the convention, but were aware of the need for change. In particular, the satisfaction level with the number and level of new buyers at home and abroad, the number of counseling sessions and the quality level were also found to be low.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.219-227
• /
• 2022

In Korea, as the aging phenomenon accelerates, the problem of traffic accidents related to the elderly is continuously emerging. Efforts to improve this are being implemented, but unfortunately the results of these effects are not clear. Therefore, in this study, the effect of traffic characteristics and incentive policies on the return of driver's licenses of elderly drivers was reviewed. As a result of the analysis, it was confirmed that the intention to return the driver's license was low in the case of men, older people, those with low dependence on public transportation, those who undertook long driving hours, and those who took frequent trips. On the other hand, financial incentives were found to play a positive role with regard to the intention to return the driver's license. However, the effect is expected to be insignificant for those with a low intention to return the driver's license. As a result, under the current policy, it is predicted that there is a limit to improving the social problems caused by elderly drivers, meaning that it is necessary to review approaches that induce the return of their driver's licenses.

• The Journal of Korean Medical History
• /
• v.36 no.1
• /
• pp.113-127
• /
• 2023

The Gyeongseong Women's Medical Training Center was created as the result of the efforts of our internal visionaries with meaningful foreign missionaries to cultivate female doctors, yet the systematic structure of the institution developed primarily out of Korean efforts. Koreans have tried hard to cultivate their descendants and the skills of the Korean people within this framework, challenging the oppression of the ruling class in a given environment, and the results have continued to this day. First, during the Early period (1890-1909), Korea began to establish women's education and the first female doctors were trained with the help of foreign missionaries. Second, during the Growth period (1910-1919), while it was difficult for women's education to be easily expressed during Japanese colonial era, the need for women's education was growing as part of the patriotic enlightenment movement, and female students who wanted to become doctors began to go abroad. In addition, during this period, the means to train female doctors in Korea was available, but this system was not recognized by the Japanese colonial government. Third, during the Preparatory period (1920-1928), the Gyeongseong Women's Medical Class, which gave practical training to female doctors, was established and centered on Rosetta Hall and female doctors who studied abroad. Fourth, a women's medical school was established during the Establishment period (1929-1938), which created a foundation for stable supply of professional women's medical personnel. In this article, we studied the process of women who were marginalized in education until they were trained as professional intellectuals, and we hope that it will help them understand the current women's education in Korea and draw directions in the future.