• Archives of Plastic Surgery
• /
• v.46 no.3
• /
• pp.267-271
• /
• 2019

A 70-year-old man complained imbalance while walking, inability to perform ankle flexion, and could not stand on tip-toe 3 months after injury. The ankle looked swollen with loss of Achilles contour and obvious gait disturbance. Magnetic resonance imaging shows a 5-cm Achilles tendon gap. Subsequently, surgery was performed to solve the neglected Achilles tendon rupture. Patient was put under general anesthesia with a regional block. Using a nontourniquet technique, a reconstructive procedure was performed using a half-width autologous Achilles tendon graft, which was attached to the calcaneal prominence with wire in a double strand Bunnell fashion. As for the proximal stump, double core Bunnell/modified Kessler suturing was carried out to suture the graft to Achilles stump. To increase the vascularization, an ipsilateral gastrocnemius fascial flap with a distally based-pedicle was harvested to wrap around the tendon graft. At a 6-month follow-up, the patient was able to stand on tip-toe and had also regained a normal gait.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.191-199
• /
• 2023

We propose a dual Fabry-Perot interferometer (DFPI) structure that combines two Fabry-Perot interferometers. The structure is designed to have spectral peaks in the red, green, and blue regions simultaneously, to be applicable to R, G, and B subpixels without any patterning process. The optimized structure has been fabricated on a glass substrate using a thermal evaporation technique. When the DFPI structure was attached to the quantum-dot color-conversion layer, the full width at half maximum values of the green and red spectra decreased by 47.29% and 51.07% respectively. According to CIE 1931 color space, the DFPI showed a 37.66% wider color gamut than the standard RGB color coordinate. Thus it was experimentally proven that the proposed DFPI structure improved color purity. This DFPI structure will be useful in realizing a display with high color purity.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.165-171
• /
• 1997

If the thickness of Pd deposited is larger than 9$\AA$, its phase is $Pd_3Si$. This phase is followed by pure Pd phase with further deposition of Pd. Also, when the thickness of Pd deposited on top of Si(111) is larger than 1$\AA$, the phase of Pd-silicide formed is found to be Pd2Si. The full width at half maximum of Pd 3d core-levels increases with decreasing of Pd film thickness at low coverages ($\leq0.5\AA$). This is due to the formation of additional phase of Pd silicide, i.e. PdSi, in addition to $Pd_2Si$.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.257-264
• /
• 2010

Though existent a transcranial magnetic stimulation makes various treatment and diagnostic sine waveform of fixed stimulation pulse, there is limitation. In this research, because strength, pulse width, pulse pattern required in treatment and diagnostic introduce other Cockroft-Walton circuit and half bridge inverter frequency and voltage variable become new device propose wish to. Have more advantages than existing device. First, do not have high voltage transformer. Second, switching loss can be less, and control output energy precisely. Three, stimulation strengths, pulse width, pulse pattern are various. As a result, sought special quality and an experiment that is improved applying inverter and cockroft - Walton circuit is half bridge inverter that do not use transformer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.11-12
• /
• 2009

In this paper, we propose a high voltage driver IC(HVIC) for LCD and PDP TV power supply. The proposed circuit is included novel a shoot-through protection and a pulse generation circuit for the high voltage driver IC. The proposed circuit has lower variation of dead time and pulse-width about a variation of a process and a supply voltage than a conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also the proposed pulse generation circuit prevent from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, and its variation is maximum 170 ns(68 %) about a variation of a process and a supply voltage. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD process parameter, and a simulation is carried out using Spectre.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.65-71
• /
• 2007

For chip-stack package applications, Cu filling characteristics into trench vias of $75{\sim}10\;{\mu}m$ width and 3 mm length were investigated with variations of the electroplating current density and the speed of a rotating disc electrode (RDE). Cu filling characteristics into trench vias were improved with increasing the RDE speed. There was a Nernst relationship between half width of trench vias of Cu filling ratio higher than 95% and the minimum RDE speed, and the half width of trenches with 95% Cu filling ratio was linearly proportional to the reciprocal of root of the minimum RED speed.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

The Okinawa Trough is a rift basin formed by extension. Analysis of multichannel seismic reflection profiles from the northwestern margin of the northern Okinawa Trough reveal that the trough is characterized by a series of tilted fault blocks bounded by listric normal faults and half-grabens developed between blocks, showing typical rifted structures. The trough display three kinds of sedimentary sequences with different seismic reflection characteristics: prerift, synrift and postrift sediments. The prerift sequence develops parallel to the dip direction of tilted fault blocks. The synrift sediments, mostly deposited in the half-grabens between tilted fault blocks, are generally well characterized by divergence of the reflectors towards the blocks indicating contemporaneous deposition during tilting. The postrift sediments are featured by continuous and parallel reflectors. The width of the half-graben and the throw-displacement rate of the basin bounding fault are closely connected. The throw-displacement rate is the maximum when the rifting event is the most active and the width of the half-graben is proportional to the rate.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.308-317
• /
• 2019

This study provided data for classifying and characterizing the lower half of the body shape for obese adult men in their 30s and 40s. Data of 492 adult males who were obese with a WHO criteria of >25 BMI were used for analysis. The results of the study are as follows. Six factors extracted from the factorial analysis as independent factors for cluster analysis were classified into three types. Type 1 (65.4%) had the lowest height of the lower half of the body with short circumference and length. Type 2 (20.3%) had the lowest height of the lower half of the body with the largest thickness, width and circumference from the back to the hip, but short in length. Type 3 (14.2%) had the lowest height of the lower half of the body with medium height and waist-height; however, the curve from the waist to the hip was the largest with the largest waist circumference, hip circumference, and width and thickness of the lower half of the body. This study will help to design a slack pattern that utilizes body shape characteristics of men in their 30s and 40s. In a follow-up study, we analyze the slack pattern and educational pattern by the company and study the necessity for a slack pattern for obese males.

• Journal of radiological science and technology
• /
• v.32 no.2
• /
• pp.213-218
• /
• 2009

A theoretical investigation has been carried out on how the energy width of the excited state of the nuclei is modulated when the $\gamma$-ray source is placed between two gold plates, at the center of the gold cylinder or the sphere. The width of the 81-keV level of $^{133}Cs$ is shown to become narrower by 3.7% at 4.2 K by reabsorption of $\gamma$ rays scattered backward from the parallel plates which are made of a 0.05-cm-thick, 3-cm-radius gold plates and separated from each other by 1.0 mm. With a 0.05-cm-thick, 5-cm-long, 1.0-mm-radius gold cylinder, we found that a width became narrower by 6.5%. In addition, when the nuclei is located in a spherical reflector of 1.0 mm in radius made of gold with a thickness of 0.5 mm. the level width is reduced by about 18.2% at a temperature 4.2 K. The results of this study indicates that the life-time of energy level was prolonged.

• Composites Research
• /
• v.34 no.3
• /
• pp.143-147
• /
• 2021

Full width half maximum (FWHM) analysis of superimposed terahertz (THz) signals in the glass fiber reinforced polymer (GFRP) was studied to detect fine delamination inside GFRP. The THz signals were measured for each fine delamination size inside the GFRP using the reflection mode of the terahertz time domain spectroscopy (THz-TDS) system. Then, the FWHM of the superimposed THz signal reflected at the fine delamination was extracted. Thereafter, the complex refractive index of the GFRP was measured using transmission mode of the THzTDS system. Based on this, the FWHM of the superimposed THz signal at the fine delamination were calculated and compared with respect to the fine delamination size. From the theoretically calculated superimposed signals, the relationship between the fine delamination size and the FWHM in the superimposed THz signal was derived. Consequently, the fine delamination size could be predicted through the analysis of the FWHM extracted from the THz signal at the fine delamination.