• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.101-103
• /
• 2017

본 논문은 human visual system(HVS)에 따른 주파수 민감도와 공간에서 다양한 특성들을 구현하기 위한 신호처리 방법을 개발하였다. 인간의 눈은 주파수 성분에 따라 민감도가 다르며 초점에서 멀수록 인지 가능한 해상도가 떨어진다. 주파수 민감도를 구현하기 위해서 본 논문은 영상 신호의 에너지 스펙트럼 모양이 contrast sensitivity function(CSF)의 모양이 되도록 하여 영상 신호의 에너지를 증가시켰으며 신호 방향에 적응적인 multiband energy scaling 방법을 개발하였다. 기존의 시스템에서 능률만을 향상시키는 기존의 분석 모델과 비교하면 개발한 방법은 HVS에 좀 더 적절하고 선호되게 영상 신호를 처리할 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.798-801
• /
• 2001

This research is about slurry wear of SM45C and SUS304, which using standard sand and KUM river sand. The results are as follows ; 1. Mass loss rates of both standard sand and KUM river sand were linearly increased as increasement of time and velocity. 2. The average diameter of sand from relatively, less wear rate and portion of larger particles. 3. Wear resistance was linear with time and velocity of liquid jet regardless of type of sand. Also it was able to evaluate with the formula, HV2/E calibrated with n, the velocity index. 4. The wear surface in liquid jet experiment was smooth. The maximum wear depth was observed at the location, 2~4mm apart from the center in the condition of 90$^{\circ}$of collision angle 6mm of nozzle diameter, and 20mm of collision distance. The sectional shape in radial appeared as 'W' shape.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.998-1002
• /
• 1997

This study has been performed to predict beam absorption with analysis of temperature field by using a FEM in co /sab 2/ laser hardening and to invesrigate into some effects of power density and travel speed of laser beam on the microstructure and hardness of ductile cast iron treated by laser surface hardening technique. Optical micrograph has shown that large martensite and small amount of retained austenite appear in inside hardened zone. Hardness measurement has revealed that the range of maximum hardness value is Hv=415 .+-. 10. The power density increases and the travel speed decreases, the depth of hardened zone increases due to increase of input power density.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1990

To investigate the influence of r.f. power and electrode distance on the TiN deposition, TiN films were deposited onto STC3, STD11 steel and Si-wafer from gas mixtures of $TiC_4/N_2/H_2$ using the radio frequency plasma assisted chemical vapor deposition. The crystallinity of TiN film could be improved by the increase of r.f. power and the decrease of electrode distance. The TiN coated layer contains chlorine, its content were decreased with increasing r.f. power as well as decreasing electrode distance. And the thickness of deposited TiN was largely affected by r.f. power and electrode distance. The hardness of deposited TiN reached a maximum value of about Hv 2,000.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.690-699
• /
• 1998

This paper discusses the techniques, procedures and the results of the ground vibration test(GVT) performed on the development aircraft and the simple procedure of FE model updating technique from the GVT results. The GVT was carried out using random excitation technique with MIMO(Multi-Input-Multi-Output) data acquistion method, and taking full advantage of poly-reference global parameter estimation technique to identify the vibration modes. In dynamic FE modeling, the aircraft was represented by beam elements and all dynamic analysis was performed using MSC/NASTRAN for this model. In updating procedure, the stiffness of the beam model was adjusted iteratively so as to get the natural frequencies and mode shapes close to the GVT results.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.660-664
• /
• 2005

Hydroxyapatite powder was injected into the tooth after decayed tooth clinic. The microstructure of tooth was observed after a tooth extraction in the body. The hydroxyapatite powder was stiffened and the junction of hydroxyapatite powder and tooth was observed. The Ca/P atomic ratio of hydroxyapatite-tooth boundary was higher than hydroxyapatite matrix. And microhardness of hydroxyapatite matrix was 92.4 Hv. The junction of hydroxyapatite powder and tooth was due to the $Ca^{2+}$ ion shift of hydroxyapatite or the firm waxy body was due to setting of hydroxyapatite powder.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2399-2402
• /
• 2003

주위 광원에 화이트 밸런스 된 카메라로 촬영한 피사체의 RGB신호를 D/sub 65/ 광원하의 표준 디스플레이 상에서 느끼는 자극치 L₁M₁S₁값과, 실제 촬영 장소에서 눈이 충분히 주위 조건에 색순응 된 후 피사체에 대해서 느끼는 자극치 L₂M₂S₂값은 다르게 느껴진다. 이는 LMS 시세포의 파장별 감도특성과 카메라의 RGB 칼라 필터의 파장별 감도특성이 다르기 때문이다. 또한 주위 광원의 종류와 밝기에 따른 물리적인 자극 변화에 대해서 카메라의 경우는 RGB 각 채널의 이득이 선형적 변화를 가진다. 그리고 눈의 경우는 LMS 시세포의 감도가 비선형적 특성을 가지기 때문에 색감의 차이를 발생시킨다. 본 논문에서는 촬영시의 주위 조건에서 원 피사체를 직접 볼 때 느끼는 색감을 표준 시환경인 D/sub 65/ 광원하에서 화이트밸런스가 D/sub 65/인 디스플레이를 통해 피사체 이미지를 볼 경우에 동일한 색감을 느끼도록 하는 알고리즘을 제안한다. 제안된 알고리즘을 이용하여 표준 조건하에서 디스플레이 하였을 때 촬영 조건에서의 등색감을 재현할 수 있다.

• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.379-384
• /
• 1997

The biodegradable characteristics of poly-$\beta$-hydroxybutyrate(PHB) film by fun맥 and soil burial are Investigated. As the results of the American Standards for Testing and Materials(ASTM) method, the you of Aspergillus niger was apparent on the PHB containing plate. This suggests that PHB was utilized as the sole carbon source by Aspergillus niger and ASTM method may have applications as measuring means of biome gradability of polyhydroxyalkanoic acid(PHA). PHB film was studied by monitoring the time-dependant changes in weight loss of PHB film under 30% and relative humidity 80 % during pot-test. As the results of pot-test, PHB film was decomposed about 87 % in 30 days by soul microorganisms. PHB film was more slowly degraded than PHB/HV film.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.1
• /
• pp.5-9
• /
• 2015

Optical and electrical properties were studied for Antimony doped tin oxide thin films from precursors containing 10, 30, 50, and 70 atom% of Sb deposited on bare sodalime silica, barrier layer coated sodalime silica, and pure silica glass substrates by sol-gel spinning technique. The direct band gaps were found to vary from 3.13~4.12 eV when measured in the hv range of 2.5~5.0 eV, and varied from 4.22~5.08 eV when measured in the range of 4.0~7.0 eV. Indirect band gap values were in the range of 2.35~3.11 eV. Blue shift of band gap with respect to bulk band gap and Moss-Burstein shift were observed. Physical thickness of the films decreased with the increase in % Sb. Resistivity of the films deposited on SLS substrate was in the order of $10^{-2}$ ohm cm. Sheet resistance of the films deposited on barrier layer coated soda lime silica glass substrate was found to be relatively less.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.456-458
• /
• 1995

This paper describes a diagnosis of power transformers by on-line detection of ultrasonic signals. Partial discharge in power transformer generates ultrasonic signals. The trend of the ultrasonic signal number can be measured when partial discharge is generated in HV Winding. The trend of the ultrasonic signal number could easily be distinguished by taking moving average. The insulation failure due to partial discharge in transformers can be predicted based in the trend analysis of the number of ultrasonic signals caused by partial discharge.