• 대한전자공학회논문지TC
• /
• 제41권9호
• /
• pp.55-65
• /
• 2004

ATM기술은 ITU나 ATM Forum과 같은 표준화 기관에서 B-ISDN서비스를 전송하기 위한 기술로 표준화 되어 왔다. 현재는 ATM기술이 복잡하여 인터넷 트래픽을 전송하도록 MPLS와 같은 백본기술로 채택되고 있다. 그러나 ATM프로토콜은 BcN망등에서 많이 채택될 것이다. 본 논문은 ATM기반 시스템에서 네트워크의 정보를 이용하여 HTR코드를 기법을 적용하여, 코드를 검출하고, 등록하는 기법에 대해 논하고 자 한다. 고속의 circuit switching시스템에서 HTR코드 제어는 필수적이며, 본 논문에서는 HTR코드검출 및 Fuzzy제어방식을 통해 실험결과를 보인다. 본 방법에 의해 제시된 실험결과는 체증상태를 신속히 제어하며 시스템 자원을 최대한 활용하고, 적은 부하로서도 효율적으로 제어함을 보인다.

• Nuclear Engineering and Technology
• /
• 제41권3호
• /
• pp.307-318
• /
• 2009

KAERI (Korea Atomic Energy Research Institute) has developed the GAMMA+ code for a thermo-fluid and safety analysis of a VHTR (Very High Temperature Gas-Cooled Reactor). A key safety issue of the VHTR design is to demonstrate its inherent safety features for an automatic reactor power trip and power stabilization during an anticipated transient without scram (ATWS) accident such as a loss of forced cooling by a trip of the helium circulator (LOFC) or a reactivity insertion by a control rod withdrawal (CRW). This paper intends to show the ATWS assessment capability of the GAMMA+ code which can simulate the reactor power response by solving the point-kinetic equations with six-group delayed neutrons, by considering the reactivity changes due to the effects of a core temperature variation, xenon transients, and reactivity insertions. The present benchmark calculations are performed by using the safety demonstration experiments of the 10 MW high temperature gas cooled-test module (HTR-10) in China. The calculation results of the power response transients and the solid core temperature behavior are compared with the experimental data of a LOFC ATWS test and two CRW ATWS tests by using a 1mk-control rod and a 5mk-control rod, respectively. The GAMMA+ code predicts the power response transients very well for the LOFC and CRW ATWS tests in HTR-10.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.674-680
• /
• 2020

We used MCNP6 computer code to model HTR-10 core reactor. We used two types of fuel; UO₂ and (Th+Pu)O₂ mixture. We determined the critical height at which the reactor approached criticality in both two cases. The neutronic and burnup parameters were investigated. The results indicated that the core fueled with mixed (Th+Pu)O₂, achieved about 24% higher fuel cycle length than the UO₂ case. It also enhanced safeguard security by burning Pu isotopes. The results were compared with previously published papers and good agreements were found.

• 에너지공학
• /
• 제14권4호
• /
• pp.232-240
• /
• 2005

경수 및 중수로 원자로계통에 대한 열수력 안전해석을 위해 개발된 MARS 코드가 고온가스로에 적용될 수 있을지 화인하기 위하여 IAEA TECDOC-1163에서 제시된 고온가스로 원자로공동냉각계통에 대한 Benchmark problem을 평가계산 하였다. HTR-10과 HTTR의 MARS 코드 계산결과는 기 보고된 THERMIX 코드와 THANPACST2 코드의 계산결과 그리고 가용한 실험결과와 비교한 바, 최대 오차범위 $4.5\%$ 정도로 전반적으로 일치하는 것으로 나타났다. 오차의 주요 원인은 복잡한 기하학적 구조를 단순하게 모델링한 부분과 MARS 코드에서 모사하기 어려운 냉각기 , 공기냉각기와 같은 고온가스로. Component에서 발생하였다. 경수형 원자로에서는 중요하게 고려하지 않았던 복사열전달이 고온가스로 원자로공동에서는 붕괴열 제거에 중요한 역할을 수행하는 것으로 나타났다. 결론적으로, 본 연구를 종합하여 볼 때 MARS 코드는 고온가스로 원자로공동냉각계통의 냉각능력을 잘 모사하고 있으며 향후 수소생산용 고온가스로 개발에 있어서 안전해석 코드로서의 역할을 충분히 수행할 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.729-738
• /
• 2009

Given the evolution of High-Temperature Gas-cooled Reactor(HTGR) designs, the source terms for licensing must be developed. There are three potential source terms: fission products, actinides in the fuel and tritium in the coolant. It is necessary to provide first an inventory of the source terms under normal operations. An analysis of source terms has yet to be performed for HTGRs. The previous code, which can estimate the inventory of the source terms for LWRs, cannot be used for HTGRs because the general data of a typical neutron cross-section and flux has not been developed. Thus, this paper uses a combination of the MCNP, ORIGEN, and MONTETEBURNS codes for an estimation of the source terms. A method in which the HTR-10 core is constructed using the unit lattice of a body-centered cubic is developed for core modeling. Based on this modeling method by MCNP, the generation of fission products, actinides and tritium with an increase in the burnup ratio is simulated. The model developed by MCNP appears feasible through a comparison with models developed in previous studies. Continuous fuel management is divided into five periods for the feeding and discharging of fuel pebbles. This discrete fuel management scheme is employed using the MONTEBURNS code. Finally, the work is investigated for 22 isotope fission products of nuclides, 22 actinides in the core, and tritium in the coolant. The activities are mainly distributed within the range of $10^{15}{\sim}10^{17}$ Bq in the equilibrium core of HTR-10. The results appear to be highly probable, and they would be informative when the spent fuel of HTGRs is taken into account. The tritium inventory in the primary coolant is also taken into account without a helium purification system. This article can lay a foundation for future work on analyses of source terms as a platform for safety assessment in HTGRs.