• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3573-3578
• /
• 2015

Transition curves are located between curve and straight section in railway. These transition curves are vulnerable to the ride comfort of passengers and safety of a vehicle because lateral acceleration, lateral jerk and roll velocity increase as curvature and cant change along the transition curves. In this paper, ride comfort on the transition curve was calculated on the basis of lateral acceleration and roll velocity measurements. The evaluation of ride comfort was conducted according to the methodology specified in European Standard. The distribution characteristics of the comfort index were investigated for the korean conventional line from the evaluation results. The influence of the curve radius and the vehicle speed on the ride comfort index was also investigated. Finally, the relationship between ride comfort and the rate of cant changes on transition curves was analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.4061-4076
• /
• 2017

With the development of high-speed railway technologies, train velocities can now reach speeds up to 350 km/h, and higher in the future. In high-speed railway systems (HSRs), loss of communication can result in serious accidents, especially when the train is controlled through wireless communications. For to this reason, operators of Long Term Evolution for Railway (LTE-R) communication systems install eNodeBs (eNBs) with high density to achieve highly reliable communications. However, densely located eNBs can result in unnecessary frequent handovers (HOs) resulting in instability because, during every HO process, there is a period of time in which the communication link is disconnected. To solve this problem, in this paper, an HO scheme based on the maximum cell residence time (CRT) and adaptive time to trigger (aTTT), which are collectively called CaT, is proposed to reduce unnecessary HOs (using CRT estimations) and decrease HO failures by improving the handover command transmission point (HCTP) in LTE-R HSR communications.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.33-52
• /
• 1998

본 연구에서는 국토동남권의 인구와 고용에 따른 공간구조 변화과정을 분석하고 향후 경부고속철도 건설에 따른 변화를 예측하였다. 본 연구의 공간범위는 양산시, 울산시, 경주시, 포항시를 대상지역으로 한 총 52개 지역공간을 기초분석 단위로 하였다. 국토동남권내 인구와 고용의 공간구조를 분석 전망하기 위하여 공간구조 측정방법인 로렌쯔곡선측정식, 중심성측정식, 접근도측정식등의 기법을 이용하였으며 공간적 집중과 분산의 정도를 전망하였다. 본 연구에서는 1970년부터 1994년까지 인구와 고용구조를 조사하여 공간구조의 변화과정을 분석하였다. 그리고 현재까지 계획된 건설 공정을 바탕으로 개통 예정시점인 2006년부터 2016년까지의 국토동남권 공간구조를 전망하기 위하여 3가지 시나리오에 따라 인구와 고용의 공간구조 변화를 예측하였다. 시나리오(1)은 경부고속철도의 서울-대구 구간을 우선적으로 건설하여 운행하고 대구-부산 구간은 경부철도의 기존선을 전철화하여 활용하는 방안이다. 시나리오(2)는 경부고속철도를 기본계획과 같이 2006년 완공하고 국토동남권내 1개 정차역인 경주시 건천역을 개통하였을 경우이다. 시나리오(3)은 시나리오(2)와 같은 조건하에서 국토동남권내 2개 정차역인 건천역과 울산역을 개통하였을 경우이다. 시나리오 (2)와 (3)의 경우는 일본 시즈오카현 노선을 경유하는 신간선 주변의 지역공간 특성이 우리나라 국토동남권과 유사함을 근거로 신간선개통전과 개통후의 지역공간 변화를 분석하여 본 연구와 비교하였다.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.487-491
• /
• 2007

When constructing a high-speed railroad, the reduction of the distance between track centers and the width of track bed will save the construction cost. However the shortening the distance between track centers may cause the stability problems due to higher wind pressure. Therefore the extensive technical review and aerodynamical study should be performed to determine the adequate distance between track centers. In this study, the impact that the increase in wind pressure due to the change of aerodynamic phenomena with the change of the distance between track centers may have on two trains passing by each other was predicted, and the stability of train operation was analyzed in order to review the distance between track centers suitable to Honam HSR trains. And we estimated the aerodynamical effects by the results of the real train experiments.

• Journal of the Korean Society for Railway
• /
• v.11 no.6
• /
• pp.575-580
• /
• 2008

When constructing a high-speed railroad, the reduction of the distance between track centers and the width of track bed will save the construction cost. However the shortening the distance between track centers may cause the stability problems due to higher wind pressure. Therefore the extensive technical review and aerodynamical study should be performed to determine the adequate distance between track centers. In this study, the impact that the increase in wind pressure due to the change of aerodynamic phenomena with the change of the distance between track centers may have on two trains passing by each other was predicted, and the stability of train operation was analyzed in order to review the distance between track centers suitable to Honam HSR trains. And we estimated the aerodynamical effects by the results of the field test.

• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.31-40
• /
• 2022

In structural engineering, the material properties of the structures such as elastic modulus, shear modulus, density, and size may not be deterministic and may vary at different locations. The dynamic response analysis of such structures may need to consider these properties as stochastic. This paper introduces a stochastic finite element method (SFEM) approach to analyze moving loads problems. Firstly, Karhunen-Loéve expansion (KLE) is applied for expressing the stochastic field of material properties. Then the mathematical expression of the random field is substituted into the finite element model to formulate the corresponding random matrix. Finally, the statistical moment of the dynamic response is calculated by the point estimation method (PEM). The accuracy and efficiency of the dynamic response obtained from the KLE-PEM are demonstrated by the example of a moving load passing through a simply supported Euler-Bernoulli beam, in which the material properties (including elastic modulus and density) are considered as random fields. The results from the KLE-PEM are compared with those from the Monte Carlo simulation. The results demonstrate that the proposed method of KLE-PEM has high accuracy and efficiency. By using the proposed SFEM, the random vertical deflection of a high-speed railway (HSR) bridge is analyzed by considering the random fields of material properties under the moving load of a train.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.114-114
• /
• 2023

기상레이더는 대류권의 기상 관측에 널리 사용되며, 기상예보를 비롯하여 항공, 농업, 수문학 등 다양한 분야에서 활용하고 있다. 기상레이더센터는 SSPA(Solid State Power Amplifier) 기반 X-Band 주파수대역(9GHz)을 사용하는 연구용 소형기상레이더 관측망을 운영하고 있다. 주로 수도권 저층 대기에서 발생하는 위험 기상현상을 1분 단위로 빠르게 관측하면서 정확한 강수 정보생산을 위한 연구를 수행하고 있다. 레이더 관측 자료는 전파를 이용하여 넓은 범위에 분포하는 눈, 비, 우박 등 대기수상체를 관측하여, 강수량 추정을 통해 강수 정보를 생산한다. 이에 따라 레이더 관측 자료의 정확성과 신뢰도를 높이기 위해서 레이더 품질관리 기술 적용은 필수적이다. 기상레이더센터는 소형기상레이더로 관측한 이중편파 자료의 효과적인 품질관리를 위한 각종 자료처리 모듈을 개발하여, 실시간 자료처리 프로그램에 적용하였다. 우선, 저층 대기 관측 시 기상에코와 더불어 강한 반사도로 나타나는 지형에코를 판별하는 모듈과 선형 또는 쐐기형태의 전파간섭에코를 비롯한 비기상에코를 효과적으로 제거하는 기술을 개발하였다. 다음으로, X-Band 주파수대역 기상레이더 관측 자료의 취약점인 강한 강수 시 발생하는 반사도 감쇠 현상을 보정하기 위한 기술도 개발하였다. 소형기상레이더 품질관리 개발과 적용을 통하여 생산된 자료는 HSR(Hybrid Surface Rainfall), 레이더 강수량 추정, 대기수상체 등 다양한 기상 산출물 생산과 동시에 기상 감시 및 연구 분야에 효과적으로 활용하고 있다.

• Geomechanics and Engineering
• /
• v.35 no.5
• /
• pp.475-486
• /
• 2023

Ballast particles have an irregular shape and are discrete in nature. Due to the discrete nature of ballast, it exhibits complex mechanical behaviour under loading conditions. The discrete element method (DEM) can model the behaviour of discrete particles under a multitude of loading conditions. DEM is used in this paper to simulate a series of three-dimensional direct shear tests in order to investigate the shear behaviour of railway ballast and its interaction at the microscopic level. Particle flow code in three dimension (PFC3D) models the irregular shape of ballast particles as clump particles. To investigate the influence of particle size distribution (PSD), real PSD of Indian railway ballast specification IRS:GE:1:2004, China high-speed rail (HSR) and French rail specifications are generated. PFC3D built-in linear contact model is used to simulate the interaction of ballast particles under various normal stresses, shearing rate and shear box sizes. The results indicate how shear resistance and volumetric changes in ballast assembly are affected by normal stress, shearing rate, PSD and shear box size. In addition to macroscopic behaviour, DEM represents the microscopic behaviour of ballast particles in the form of particle displacement at different stages of the shearing process.

• Structural Engineering and Mechanics
• /
• v.90 no.1
• /
• pp.41-49
• /
• 2024

In recent years, China's high-speed railway (HSR) line continues to expand into seismically active regions. Analyzing the features of earthquake rail irregularity is crucial in this situation. This study first established and experimentally validated a finite element (FE) model of bridge-track. The FE model was then combined with earthquake record database to generate the earthquake rail irregularity library. The sample library was used to construct a model of desired earthquake rail irregularity based on signal processing (SFT) and hypothesis principle. Finally, the effects of random pier height and random span number on desired irregularity were analyzed. Herein, an equivalent method of calculating earthquake rail irregularities for random structures was proposed. The results of this study show that the amplitude of desired irregularity is found to increase with increasing pier height. When calculating the desired irregularity of a structure with unequal pier heights, the structure can be regarded as that with equal pier heights (taking the largest pier height). For a structure with the span number large than 9, its desired irregularity can be considered equal to that of a 9-span structure. For the structures with both random pier heights and random span number, their desired irregularities are obtained by equivalent calculations for pier height and span number, respectively.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.241-251
• /
• 2005

Exopolysaccharide (CBP) from submerged culture broth of Ganoderma lucidum mycelium and the water soluble (BWS) and water insoluble (BWI) fractions of CBP were prepared by gel filtration. Antitumor activity and effects on proliferation and differenciation of human cancer cells and mouse NIH 3T3 cells were studied. Cytotoxicity test of CBP, BWS and BWI fractions on human cancer cell lines was performed by using sulforhodamine B (SRB) assay. A549 (lung carcinoma), Colo320 DM and HSR (colon carcinoma), and NIH 3T3 cells were used. BWI fraction showed the strongest cytotoxicity (maximum 20% survival) to all human cells tested. However it did not induced apoptosis. Interestingly BWI fraction did not exert cytotoxic effect on NIH 3T3 cells at low concentration of cells ($5{\times}10^4$) but strong toxic effect at high concentration of cells($5{\times}10^5$) which showed transformed morphology. These results suggest that BWI may have cancer cell specific anticancer activity. However, BWI fraction did not effect the amount of pRb and c-myc protein, which implied that BWI fraction did not act at the early stage of signal transduction pathway. CBP fraction induced differenciation of human leukemic cell line, HL-60 cells suggesting the carcinogenesis prevention of normal cell and possible induction of normalization for cancer cell.