• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.984-988
• /
• 2004

This study presents the process of the solenoid parameter estimation of an common-rail injector fer HSDI(High Speed Direct Injection) diesel engines. The EMF(Electromotive Force) and solenoid inductance are the major parameters for presenting the injector dynamics, and also these parameters are estimated by using a multi-layer feedforward artificial neural networks(ANN). The performances of parameter estimators are verified by the simulation with injector model. The feasibility of this methodology is closely examined through the simulation in the various operating points of injector. The simulation results have revealed that estimated parameters show favorable agreements with the common-rail injector model.

• 대한기계학회논문집B
• /
• 제40권9호
• /
• pp.569-576
• /
• 2016

본 연구는 HSDI 디젤 엔진의 연소 성능 향상을 위해 연료 분사 타겟팅의 최적화를 수치 해석적으로 연구하였다. 연구에 적용된 연소모델은 ECFM-3Z모델을 사용하였고, 해석에 필요한 엔진 부하 및 연료의 타겟팅은 분사량, 분사각도, 분사시기를 변경하여 해석한 실린더압력, 열 발생률, 배기 배출물 특성의 결과를 비교 분석하여 연구하였다. 연구결과, 분사시기와 분사각도에 따라 연료가 피스톤 보울 안쪽으로 많이 유입될수록 열 발생률의 증가로 인하여 $NO_x$는 증가하였고, CO, Soot은 연소성능의 증진으로 감소하는 것을 확인할 수 있었다. 또한, 분사시기가 진각될수록 균일 혼합기 형성시간이 충분하여 연소성능이 증진되고, 실린더압력은 증가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2245-2250
• /
• 2003

Particulate matters(PM) have bad effect on the health. We carried out measurements of diesel PM under $10{\mu}m$ diameter from a HSDI diesel engine with a diesel oxidation catalyst(DOC) by using the ELPI. This paper compares the two results of the smoke level and the PM level of masses and numbers. We also investigated the effect of the DOC. Under high speed and load, HSDI diesel engine exhausts much masses of particulate matters over 100nm diameter, and a number of PM from 7 to 100nm diameters at the same condition. DOC could reduce the total mass of the PM. However, the DOC could increase the number of ultra fine PM. Before light-off of the soot, the DOC absorb the PM and the DOC oxidize the PM after light-off temperature. The fine PM could be made during the oxidation. Therefore, the advanced DOC is needed to reduce the number of the fine PM.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.153-158
• /
• 2006

To optimize the combustion system in a HSDI diesel engine, a new analysis technology was developed. The in-cylinder 3-D combustion analysis was carried out by the modified KIVA-3V, and the spray characteristics for the high pressure injection system were analyzed by HYDSIM. The combustion design parameters were optimized by coupling the KIVA-3V and the iSIGHT. The optimization procedure consists of 3 steps. The $1^{st}$ step is the sampling method by the Design of Experiment(DOE), the $2^{nd}$ step is the approximation using the Neural Network method, and the $3^{rd}$ step is the optimization using the Genetic Algorithm. The developed procedures have been approved as very effective and reliable, and the computational results agree well with the experimental data. The analysis results show that the optimized combustion system in a HSDI diesel engine is capable of reducing NOx and Soot emissions simultaneously keeping a same level of the fuel consumption(BSFC).

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.138-143
• /
• 2006

Modification of injector, oil ring tension reduction and oil pump rotor re-matching with optimization of relevant engine control parameters could drive fuel consumption reduction of HSDI diesel engine. A 5 holes injector was replaced with a 6 holes with smaller nozzle hole diameter and 1.5 k factor, and evaluated in a view of fuel economy and emission trade-offs. With introducing smaller nozzle hole diameter injector, PM(Particulate Matter) was drastically decreased for low engine load and low engine rpm. Modification of oil pump and oil ring was to reduce mechanical friction and be proved to better fuel economy. Optimization of engine operating conditions was a great help for the low fuel consumption. Influence of the engine operating parameters· including pilot quantity, pilot interval, air mass and main injection timing on fuel economy, smoke and NOx has been evaluated with 14 points extracted from NEDC(New European Driving Cycle) cycle. The fuel consumption was proved to $7\%$ improvement on an engine bench and $3.7\%$ with a vehicle.

• 에너지공학
• /
• 제10권3호
• /
• pp.177-182
• /
• 2001

본 연구는 경유승용차(HSDI 경유엔진) 도입에 대해 소비자 측면, 사회적 측면의 경제적 효과를 분석하고자 하였다. 먼저, 생애비용을 고려한 소비자 경제성분석 결과 승용차 수명 10년, 연간 평균 주행거리를 20.000km로 가정할 때 승용차 1대당 연료비 절감액은 13,836천원으로 추정된다. 사회적 편익은 평균 주행거리 20,000km 기준 경유승용차 관매 10% 증가 전제시 휘발유 승용차 대비 2002년부터 이익이 실현되기 시작하여 2010년에 1,541억원의 편익이 발생하는 것으로 추산된다. 사회적 누적편익은 판매량 10% 증가 가정시 20,000km 주행시 2010년까지 6,368억원의 편익이 발생할 것으로 보인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3300-3305
• /
• 2007

Ignition delay of second injection of HSDI diesel engine was usually much shorter than that of first injection. It is due to the interaction between radicals generated during the combustion process, and mixed gas of second injection. In this paper, To analyze combustion phenomena of multiple injection mode in HSDI diesel engine effectively, two-dimensional flamelet combustion model was modified. To reduce calculation time, two-dimensional flamelet equations were only applied near stoichiometric region. If this region was ignited, species and temperature of other region were changed to the steady-state solutions of one dimensional flamelet equations. By this method calculation time for solving flamelet equations was reduced to 20 percents, thought the results were almost same. Modified flamelet combustion model was coupled to commercial CFD code interactively using user subroutine.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.59-66
• /
• 2002

This paper presents the process of the needle lift estimation ova common-rail injector fur HSDI(High Speed Direct Injection) diesel engines. A nonlinear mathematical model of dynamic behaviors of common-rail injector is established at first. Based on the mathematical model of the common-rail injector, the methodology of estimating the injector needle lift is introduced. A sliding mode observer is applied to overcome the model uncertainties. The common-rail injector model and the needle lift estimator are verified by simulations and experiments. The simulation and experimental results indicate that the model outputs are in a good agreement with experimental data, and the proposed nonlinear sliding observer can effectively estimate the needle lift.

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.129-137
• /
• 2006

The representative interactive flamelet(RIF) concept has been applied to numerically simulate the combustion processes and pollutant formation in the HSDI diesel engine. In order to account for the spatial inhomogeneity of the scalar dissipation rate, the eulerian particle flamelet model using the multiple flamelets has been employed. The vaporization effects on turbulence-chemistry interaction are included in the present RIF procedure. the results of numerical modeling using the rif concept are compared with experimental data and with numerical results of the widely-used ad-hoc combustion model. Numerical results indicate that the rif approach including the vaporization effect on turbulent spray combustion process successfully predicts the ignition delay characteristics as well as the pollutant formation in the HSDI diesel engines.

• 기계저널
• /
• 제43권1호
• /
• pp.51-57
• /
• 2003