• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.299-309
• /
• 2014

HSA800 is a new high strength steel (HSS) plate for building structures developed by POSCO and RIST in 2011. It has upper and lower bounds for yield ($F_y$) and tensile ($F_u$) strength as of 650-770MPa and 800-950MPa, respectively, with yield ratio ($F_y/F_u$) limit as of 0.85 which make steel quality more reliable and enhance the seismic resistance of structures. As made by TMCP, it has a good weldability without increasing carbon percentage. The objective of this study is to provide alternative design of mega-structural members of the Lotte World Tower (555m, 123 story), a first super-tall building in Korea, using HSS considering structural safety, constructability, and cost-effectiveness. Steel outrigger trusses, belt-trusses and steel exterior columns were selected and analyzed to evaluate the structural performance between original and alternative designs using HSS. The results show that HSS can be applied to the members which do not affect lateral stiffness of a building and, in this study, approximately 1100tons of steel were saved. It implies that HSS can save overall construction costs - manufacturing, delivery, and erection costs - by reducing mega structural member size. HSA800 was very first applied to the Lotte World Tower based on the results of this study.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.3
• /
• pp.371-376
• /
• 1994

To reevaluate the clinical usefulness of erection penography for diffential diagnosis of impotence, we reviewed retrospectively the data of penography in 56 patients who were diagnosed as impotence by various diagnostic workup. Twelve normal males were studied as control group. Papaverine HCl 30mg was injected into the corpus cavernosum and simultaneously $^{99m}Tc$-HSA 20mCi was injected via an antecubital vein. After injection radioactivities in the penile area were detected for 30 minutes by gamma camera and time activity curve was displayed. We defined that transit time(TT) is the time to reach peak activity and erection persistent time(EPT) is the duration of time to maintain peak activity and venous index(VI) is the ratio of radioactivity($R_{30}/R_{max}$). The results were as follows. The TT of arteriogenic group($10.7{\pm}2.8min$) was significantly increased compared with those of control and venogenic groups(P<0.05, respectively). The EPT of venogenic group ($6.2{\pm}6.8min$) is significantly decreased compared with those of control and arteriogenic groups(P<0.05, respectively). The TT of psychogenic($15.2{\pm}5.5min$) is significantly increased compared with those of control and arteriogenic groups(P<0.05, respectively). In conclusion erection penography was very useful for the diagnosis of vascular and psychogenic impotence and for differentiation between arteriogenic and venogenic but it could not differentiate mixed type or neurogenic from vascular or psychogenic.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.799-800
• /
• 2012

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.305-306
• /
• 2018

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.1 s.40
• /
• pp.56-63
• /
• 2007

Because the mixing efficiency is influenced remarkably by varying the geometrical configurations, the study of flow characteristics inside the mechanical agitator is very important to improve the performances. The draught tube in the agitator makes intermixing between the screw and tube by interrupting radial flow, and it makes circulation region in a mixing chamber. In general, the helical screw agitator with a draught tube (HSA) is proved more efficient to mix than the others. Consequently, such as the shapes of helical screw, number of pitches and the variation of angular velocity are the main parameters for improving the capacity of HSA. And also the suspension of the solid particles in the agitator can be determined these parameters. The rate of solids suspension in the mixing chamber was quantified with a statistical average value, of. Numerical analyses were carried out, using a commercial CFD code, Fluent, to obtain the velocity, pressure and particle distributions under steady, laminar flow and no-slip conditions. Results are graphically depicted with various parameters.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.55.4-56
• /
• 2015

The Hilbert-Huang Transform (HHT) is composed of the Empirical Mode Decomposition (EMD) and the Hilbert Spectral Analysis (HSA). The EMD decomposes any time series data into a small number of components called the Intrinsic Mode Functions (IMFs), compared to the Discrete Fourier Transform which decomposes a data into a large number of harmonic functions. Each IMF has varying amplitude and frequency with respect to time, which can be obtained by HSA. The time resolution of the modes in HHT is the same as that of the given time series, while in the Wavelet Transform, Constant Q Transform and Short-Time Fourier Transform, there is a tradeoff between the resolutions in frequency and time. Based on the time-dependent amplitudes of IMFs, we develop an Event Trigger Generator and demonstrate its efficiency by applying it to gravitational-wave data.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.967-972
• /
• 2004

Hardness and surface property of coated gel materials are considerably different according to kinds(particle size/stabilized ion) of colloidal silica(CS), kinds of silanes, content ratio of silane versus CS, and reaction degree in sol solution. We report the properties of sol-gel coating materials in which the factors of reaction are kinds of CS, contents ratio of CS and MTMS, and reaction time of sol. The contact angles of the coated films obtained from the mixed CS system showed a little good relationship with MTMS content increase to those from HSA CS reaction system and the change of contact angle didn't have much effect on reaction time of sol. In the coating films obtained from HSA CS reaction system, the surface was much rough in case of that the content MTMS decreased and the reaction of sol kept long. The surface roughness of films obtained from the mixed CS reaction system showed similar tendency, though its degree was a little different. In synthesis of sol-gel coating materials, we could identify that choice of CS kinds and content ratio of CS and silane were important and it was desirable the reaction time of sol is not long.

• Clinics in Shoulder and Elbow
• /
• v.22 no.3
• /
• pp.121-127
• /
• 2019

Background: Posterior decentering is not an uncommon finding on rotator cuff tear patients' shoulder magnetic resonance imaging. No previous study has reported on the relationship between posterior decentering and rotator cuff tear. Methods: We assessed patients' rotator cuff tear humeral head positions based on humeral-scapular alignment (HSA). Subjects were classified into centering and decentering groups based on a <2 mm or >2 mm HSA value, respectively. Differences in rotator cuff tear size, degree of tear, and fatty degeneration between the two groups were evaluated. Results: One hundred seventy-five patients (80 males, 95 females; mean age: $59.7{\pm}6.5$ years old) were selected as subjects (casecontrol study; level of evidence: 3). Tear size, degree of subscapularis tendon tear, and fatty degeneration of the supraspinatus, infraspinatus, and subscapularis muscles were significantly different between the two groups (p<0.001, p<0.001, p<0.001). Conclusions: The occurrence of decentering was related to rotator cuff tear size, degree of subscapularis tendon tear, and fatty degeneration of the rotator cuff muscles.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.4 no.2
• /
• pp.85-89
• /
• 2018

We demonstrate a detail protocol for the radiosynthesis of an $^{125}I$-labeled MSTP prosthetic group and its application to the efficient radiolabeling of human serum albumin (HSA). Radioiodination of the precursor (2) was carried out by using $[^{125}I]$NaI and chloramine T as an oxidant at room temperature for 15 min. After HPLC purification of the crude product, the purified $^{125}I$-labeled MSTP ($[^{125}I]1$) was obtained with high radiochemical yield ($73{\pm}5%$, n = 3) and excellent radiochemical purity (>99%). Site-specific reaction between ($[^{125}I]1$) and HSA gave the $^{125}I$-labeled human serum albumin ($[^{125}I]3$) with more than 99% of radiochemical yield as determined by radio-thin-layer chromatography (radio-TLC). These results clearly demonstrate that the present radiolabeling method will be useful for the efficient and convenient radiolabeling of thiol-bearing biomolecules.

• Journal of the Korean Chemical Society
• /
• v.67 no.4
• /
• pp.222-225
• /
• 2023

Metallic salts of C10-18 aliphatic carboxylic acids were prepared and their scanning electron microscopic images were analyzed for the morphology dependency with the metal and the carboxylic acid. Regardless of metal ion, metal salts of dicarboxylic acids showed a high crystallinity with a fiber image (SuA-Na). The aromatic dicarboxylates also represented a morphology of a rectangular-rod or board shapes (IA-Li, IA-Ba). With Na ion, most aliphatic carboxylate (MA, PA, SA) showed a fiber-like crystallinity. However, other monovalent Li, K and multivalent Mg, especially Al ion resulted a glassy-amorphous in the metallic salts of acids (MA, PA, SA). With divalent Ba and Ca ions, the metal salt of aliphatic acids expressed a branched round cluster shape as in SA-Ca, SA-Ba. Both Li and Mg ions with a similar size showed a strong morphological similarity in the metallic salts of aliphatic acids MA, PA, SA. In the case of Na and Ca ions with a similar size (98, 106 pm), both ionic salts of stearic acid gave a branching effect for a fiber or round granular image. In the case of hydroxyl-aliphatic acids (HLA, HPA, HSA), the fiber images in HLA-Na and HSA-Na was appeared about 100 nm thicker than those of nonhydroxycarboxylates (LA-Na, SA-Na). The metallic salts of unsaturated C-18 carboxylic acids (OlA, LeA and LnA) showed an amorphous glassy image due to a kinked carbon chain.