• Title/Summary/Keyword: HR Information

검색결과 469건 처리시간 0.027초

고출력 InGaAs레이저 다이오드 제작 (Fabrication of High Power InGaAs Diode Lasers)

  • 계용찬;손낙진;권오대
    • 전자공학회논문지A
    • /
    • 제31A권10호
    • /
    • pp.79-86
    • /
    • 1994
  • Gain-guided broad-area single quantum well separate confinement heterostructure diode lasers have been fabricated from structures grown by metal organic vapor phase epitaxy. The active layer of the epi-structure is InGaAs emitting 962-965nm and the guiding layer GaAs. The channel width is fixed to 150${\mu}$m and the cavity length varys within the range of 300~800${\mu}$m. For uncoated LD's, the output power of 0.7W has been obtaained at a pulsed current level of 2A, which results about 60% external quantum efficiency. The threshold current density is 200A/cm$^{2}$ for the cavity lengths of 800.mu.m LD's. The stain effect upon the transparent current density has been observed. The internal quantum efficiency is expected to be 88% and the internal loss to be 18$cm^{-1}$. The beam divergence has been measured to be 7$^{\circ}$to lateral and 40$^{\circ}$to transverse direction. finally, 1.2W continuous-wave output power has been obtained at a current level of 2A for AR/HR coated LD's die-bonded on Cu heat-sink and cooled by TEC.

  • PDF

Does Microinvasive Adenocarcinoma of Cervix Have Poorer Treatment Outcomes than Microinvasive Squamous Cell Carcinoma?

  • Ruengkhachorn, Irene;Hanamornroongruang, Suchanan;Leelaphatanadit, Chairat;Sangkarat, Suthi
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권8호
    • /
    • pp.4013-4017
    • /
    • 2016
  • Background: To compare the pathological findings and oncologic outcomes of stage IA cervical carcinoma patients, between adenocarcinoma and squamous cell carcinoma cases. Materials and Methods: A total of 151 medical records of stage IA cervical carcinoma patients undergoing primary surgical treatment during 2006-2013 were reviewed. Information from pathological diagnosis and recurrence rates were compared with descriptive statistical analysis. The Kaplan-Meier method and Cox proportional hazards model were used for survival analysis. Results: The median age was 48.9 years. There was no significant difference in rates of lymph node, parametrium, uterine, vaginal, or ovarian metastasis, when comparing adenocarcinoma with squamous cell carcinoma. Overall recurrence rates of adenocarcinoma (5.7%) and squamous cell carcinoma (2.6%) were not statistically significant different, even when stratified by stage. When comparing progression free survival with squamous cell carcinoma, adenocarcinoma had an HR of 0.448 (0.073-2.746), p=0.386. Conclusions: Microinvasive adenocarcinoma of cervix has similar rate of extracervical involvement and oncologic outcomes to squamous cell carcinoma.

BSC 요인이 전문기술자의 보상에 미치는 영향 : 학사 전문기술자와 석사 전문기술자를 중심으로 (Is Technical Expert Compensated for the Education on Finance and Management?)

  • 남철;권두순;이미영
    • 디지털융복합연구
    • /
    • 제12권7호
    • /
    • pp.49-64
    • /
    • 2014
  • 본 연구는 재무 및 경영에 대한 지식에 대해 체계적인 교육을 습득한 전문 기술자, 연구원들이 자신이 본래 가지고 있던 전문지식의 가치를 높임으로써 개인의 성과에 미치는 영향을 검증하기 위한 것으로써 이를 위해 균형성과표(BSC : Balanced Score Card)를 활용하여 개인의 성과에 어떠한 영향을 미치는지 분석하고자 하였다. 결과를 분석해 보면, 기술직이나 연구직에 종사한 전문기술자들, 연구원들이 재무 및 경영에 대한 지식이 체계적인 교육과정을 통해 자신이 가지고 있는 전문지식에 대한 가치를 높임으로써 개인의 성과요인(학습과 성장, 고객, 내부프로세스)에 유의한 영향을 미치는 것으로 나타났다.

A Wrist Watch-type Cardiovascular Monitoring System using Concurrent ECG and APW Measurement

  • Lee, Kwonjoon;Song, Kiseok;Roh, Taehwan;Yoo, Hoi-jun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권5호
    • /
    • pp.702-712
    • /
    • 2016
  • A wrist watch type wearable cardiovascular monitoring device is proposed for continuous and convenient monitoring of the patient's cardiovascular system. For comprehensive monitoring of the patient's cardiovascular system, the concurrent electrocardiogram (ECG) and arterial pulse wave (APW) sensor front-end are fabricated in $0.18{\mu}m$ CMOS technology. The ECG sensor frontend achieves 84.6-dB CMRR and $2.3-{\mu}Vrms$-input referred noise with $30-{\mu}W$ power consumption. The APW sensor front-end achieves $3.2-V/{\Omega}$ sensitivity with accurate bio-impedance measurement lesser than 1% error, consuming only $984-{\mu}W$. The ECG and APW sensor front-end is combined with power management unit, micro controller unit (MCU), display and Bluetooth transceiver so that concurrently measured ECG and APW can be transmitted into smartphone, showing patient's cardiovascular state in real time. In order to verify operation of the cardiovascular monitoring system, cardiovascular indicator is extracted from the healthy volunteer. As a result, 5.74 m/second-pulse wave velocity (PWV), 79.1 beats/minute-heart rate (HR) and positive slope of b-d peak-accelerated arterial pulse wave (AAPW) are achieved, showing the volunteer's healthy cardiovascular state.

컬러 영상에서 HR비를 이용한 화소기반 피부색 검출 (Pixel-based Skin Color Detection using the Ratio of H to R in Color Images)

  • 이병선;이은주
    • Journal of Information Technology Applications and Management
    • /
    • 제12권1호
    • /
    • pp.231-239
    • /
    • 2005
  • This paper describes a new algorithm for pixel-based skin color detection to differentiate human form in color images by the ratio of R to H. In order to detect skin color efficiently, we examine the distribution of the R, G and B color elements combining to constitute the skin color in various color images. It shows that R is located in a narrower area than G and B on the RGB color space. And skin color is more related to R than G and B. Meanwhile, when the color image is transformed to the HSI color space, the S is variously changed in accordance with skin colors. The I is changed in accordance with the quantity and angle of light. But the H is less influenced by other conditions except for color. On the basis of the aforementioned study, we propose that the threshold for skin color detection is decided by the ratio of R to H. The proposed method narrows down the range of threshold, detects more skin color and reduces mis-detection of skin color in comparison to detection by R or H. In experimentation. it shows that the proposed algorithm overcomes changes of brightness and color to detect skin color in color images.

  • PDF

Si(100) 기판 위에 성장돈 3C-SiC 박막의 물리적 특성 (Physical Characteristics of 3C-SiC Thin-films Grown on Si(100) Wafer)

  • 정귀상;정연식
    • 한국전기전자재료학회논문지
    • /
    • 제15권11호
    • /
    • pp.953-957
    • /
    • 2002
  • Single crystal 3C-SiC (cubic silicon carbide) thin-films were deposited on Si(100) wafer up to the thickness of 4.3 ${\mu}{\textrm}{m}$ by APCVD (atmospheric pressure chemical vapor deposition) method using HMDS (hexamethyildisilane; {CH$_{3}$$_{6}$ Si$_{2}$) at 135$0^{\circ}C$. The HMDS flow rate was 0.5 sccm and the carrier gas flow rate was 2.5 slm. The HMDS flow rate was important to get a mirror-like crystal surface. The growth rate of the 3C-SiC film was 4.3 ${\mu}{\textrm}{m}$/hr. The 3C-SiC epitaxial film grown on Si(100) wafer was characterized by XRD (X-ray diffraction), AFM (atomic force microscopy), RHEED (reflection high energy electron diffraction), XPS (X-ray photoelecron spectroscopy), and Raman scattering, respectively. Two distinct phonon modes of TO (transverse optical) near 796 $cm^{-1}$ / and LO (longitudinal optical) near 974$\pm$1 $cm^{-1}$ / of 3C-SiC were observed by Raman scattering measurement. The heteroepitaxially grown film was identified as the single crystal 3C-SiC phase by XRD spectra (2$\theta$=41.5。).).

고압용 압력센서의 제작과 그 특성 (Fabrication and Characteristics of pressure sensors for high pressure)

  • 최성규;서정환;정귀상
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 C
    • /
    • pp.1375-1377
    • /
    • 2001
  • This paper describes the fabrication and characteristics of CrN thin-film type pessure sensors, in which the sensing elements were deposited on SUS. 630 diaphragm by DC reactive magnetron sputtering in an argon-nitride atmosphere(Ar-(10%) $N_2$). The optimized condition of CrN thin-film sensing elements was thickness range of 3500$\AA$ and annealing condition($300^{\circ}C$, 3 hr) in Ar-10 %$N_2$ deposition atmosphere. Under optimum conditions, the CrN thin-films for strain gauges is obtained a high resistivity, $\rho$=1147.65 ${\mu}{\Omega}$cm, a low temperature coefficient of resistance, TCR=-186 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal, 11.17. The output sensitivity of fabricated CrN thin-film type pressure sensors is 2.36 mV/V, 4$\sim$20 mA and the maximum non-linearity is 0.4 %FS and hysteresis is less than 0.2 %FS..

  • PDF

고온용 마이크로 세라믹 박막형 압력센서의 제작과 그 특성 (Fabrication of Micro Ceramic Thin-Film Type Pressure Sensors for High-Temperature Applications and Its Characteristics)

  • 김재민;이종춘;정귀상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.888-891
    • /
    • 2003
  • This paper describes on the fabrication and characteristics of micro ceramic thin-film type pressure sensors based on Ta-N strain-gauges for high-temperature applications. The Ta-N thin-film strain-gauges are deposited onto thermally oxidized Si diaphragms by RF sputtering in an argon-nitrogen atmosphere($N_2$ gas ratio: 8 %, annealing condition: $900^{\circ}C$, 1 hr.), Patterned on a wheatstone bridge configuration, and use as pressure sensing elements with a high stability and a high gauge factor. The sensitivity is $1.097{\sim}1.21mV/V.kgf/cm^2$ in the temperature range of $25{\sim}200^{\circ}C$ and the maximum non-linearity is 0.43 %FS. The fabricated pressure sensor presents a lower TCR, non-linearity than existing Si piezoresistive pressure sensors. The fabricated micro ceramic thin-film type pressure sensor is expected to be usefully applied as pressure and load sensors that is operable under high-temperature environments.

  • PDF

수분의 흡수에 따른 구조용 목질판넬의 인발 및 함입성능 (Nail Withdrawal Resistance and Embedding Strength of Structural Wood Panels with Water Absorption)

  • 오세창
    • 한국가구학회지
    • /
    • 제10권2호
    • /
    • pp.1-8
    • /
    • 1999
  • The use of structural wood based panels like plywood, OSB in many applications involves the use of nails, and data on the performance of panel-nail connection are needed for design and comparative purpose. This study was carried out to develop basic information on nail performance(withdrawal, embedding, nailhead push through) with water absorption in plywood and OSB. In withdrawal resistance test, initial stiffness of plywood performed better than OSB in 24hr soaked condition. The soaked condition reduced average nail withdrawal resistance value about 46% (12d mail), 53%(8d nail) in OSB, 17%(12d mail), 24%(8d mail) in plywood. The nail embedding strength of plywood also performed better than that of OSB and retention value(wet strength/dry strength) yielded similar in each nail types. The nail head push through capacity of OSB was higher than that of plywood in dry condition, but equal or lower in soaked condition. Therefore, critical consideration about structural panels is required in moist applications. The average values of nail withdrawal, nail embedding strength and nail head push through resistance of tested materials meet the minimum requirement of various specification and standards.

  • PDF

식물의 감수분열에서 상동 재조합 효소 특이 기능의 연구현황 및 전망 (Current status and prospects of the meiosis-specific function of recombinase in plants)

  • 정유진;남기홍;김태성;이인혜;조용구;강권규
    • Journal of Plant Biotechnology
    • /
    • 제45권1호
    • /
    • pp.1-8
    • /
    • 2018
  • Meiosis is a specialized cell division, essential in most reproducing organisms to halve the number of chromosomes, thereby enabling the restoration of ploidy levels during fertilization. A key step in meiosis is homologous recombination, which promotes homologous pairing and generates crossovers (COs) to connect homologous chromosomes until their separation at anaphase I. These CO sites, seen cytologically as chiasmata, represent a reciprocal exchange of genetic information between two homologous non-sister chromatids. RAD51, the eukaryotic homolog of the bacterial RecA recombinase, plays a central role in homologous recombination (HR) in yeast and animals. Loss of RAD51 function causes lethality in the flowering plant, Arabidopsis thaliana, suggesting that RAD51 has a meiotic stage-specific function that is different from homologous pairing activity.