• Korean Journal of Clinical Pharmacy
• /
• v.22 no.1
• /
• pp.9-12
• /
• 2012

Background: Cefcapene pivoxil hydrochloride, is an ester-type oral cephem antibiotic. This study was performed to compare the pharmacokinetics and evaluate the bioequivalence of two cefcapene pivoxil hydrochloride 75 mg formulations. Method: In a randomized $2{\times}2$ crossover study, sixty healthy male volunteers were randomly assigned into two groups. After a single dose of 75 mg cefcapene pivoxil hydrochloride oral administration, blood samples were collected at specific time intervals from 0-12 hours. The plasma concentrations of cefcapene pivoxil hydrochloride were determined by LC-MS/MS. The pharmacokinetic parameters were determined from the plasma concentration-time profiles of both formulations. The pharmacokinetic parameters such as $AUC_{last}$, $AUC_{inf}$ and $C_{max}$, were calculated and the 90% confidence intervals for test/reference ratio for pharmacokinetic parameters were obtained by analysis of variance on logarithmically transformed data. Results: The mean value for $AUC_{last}$ in test and reference drug was $4053.1{\pm}876.5\;ng{\cdot}hr/mL$ and $3595.7{\pm}1029.1\;ng{\cdot}h/mL$, respectively. The mean value for $C_{max}$ in test and reference drug was $1324.9{\pm}321.4$ ng/mL and $1159.1{\pm}335.9$ ng/mL, respectively. The 90% confidence intervals of the $AUC_{last}$ and $C_{max}$ ratio for test drug and reference drug were log 1.09-log1.22 and log 1.09-log1.24, respectively. No adverse events were reported by subjects or found on analysis of vital signs or laboratory tests. Conclusion: This single dose study found that the test and reference products met the regulatory criteria for bioequivalence in these health volunteers. Both formulations were safe and well tolerated in 75 mg of cefcapene pivoxil hydrochloride.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.61-69
• /
• 2014

Carboxymethyl-${\beta}$-cyclodextrin (${\beta}$-CMCD), as a biodegradable surfactant with hydrophobic and hydrophilic properties, has potential advantages of being applicable to the simultaneous treatment of multiple contaminated soils. In this study, the desorption behaviors of r adionuclides such as cobalt (Co), strontium (Sr), and cesium (Cs) from the soil contaminated with them were experimentally investigated and the effectiveness of CMCD as a desorbent was evaluated. The desorption equilibrium of used radionuclides could be achieved within 1~3 hr and the desorption ratio from kaolin was higher than that from natural soil. The addition of CMCD of 2 g/L increased the desorption ratio by 5~20 % and the desorption ratio of used r adionuclides was shown in the order of Co > Cs > Sr. The experimental desorption data were fitted successfully by pseudo-second order kinetic model and the desorption rate of the r adionuclides was shown in the order of Cs > Co > Sr. Hysteresis between adsorption and desorption of the r adionuclides, as shown in the order of Sr > Co > Cs, increased as the desorption rate decreased. Consequently, it could be considered that the desorption rate was one of the significant factors of the hysteresis. The addition of CMCD as desorbent increased the amount of desorbed radionuclides and decreased the hysteresis. However, the CMCD could not completely desorb the radionuclides from soils even though the excess of CMCD was added.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.2
• /
• pp.167-178
• /
• 1996

In order to identify PCP glucose conjugates transformed from PCP in soybean and rice cell suspension cultures, the purified metabolites were acetylated, purified twice by HPLC using a normal and a reversed phase column, and then subjected to fast atom bombardment(FAB) mass spectrometric analysis. As were the conjugates, their acetylated derivatives of the glucose conjugates formed at the early stage(48 hr) of metabolism were separated by HPLC into three fractions. FABMS analysis of each fraction revealed that, at least in two fractions, the locations of the spectral peaks were practically coincident with those deducible from the structures of pentachlorophenyl and tetrachlorophenyl ${\beta}-D-glucopyranosides$. Based on information obtained from mass spectral and chromatographic analysis of not only the water-soluble metabolites but also aglycones and glycone, it is concluded that PCP is primarily metabolized to glucose conjugates, which account for more than 50% recovery of the PCP-conveyed radioactivity from the water soluble metabolites : The conjugates are mainly made up of pentachlorophenyl ${\beta}-D-glucopyranoside$, tetrachlorophenyl ${\beta}-D-glucopyranosides$( probably 2 or more isomers), and 2-hydroxy-3,4,5,6-tetrachlorophenyl ${\beta}-D-glucopyranoside$.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.622-627
• /
• 2009

The objectives of this study were to evaluate a protease suitable for the enzymatic hydrolysis of a snow crab processing by-product (SPB) and to optimize the hydrolysis conditions using response surface methodology (RSM). The SPB was hydrolyzed at $50^{\circ}C$ and pH 7.0-7.2 to obtain various degree of hydrolysis (DH) using Flavourzyme at an enzyme/substrate (E/S) ratio of 3.0%. The reaction progress curve exhibited an initial fast reaction rate followed by a slowing of the rate. The DH was increased to 30% at 90 min with a final DH 32 to 36%. A central composite experimental design having three independent variables (reaction temperature, reaction time, and E/S ratio) with five levels was used to optimize the enzymatic hydrolysis conditions. Based on the DH data, the optimum reaction conditions for the enzymatic hydrolysis of the SPB were a temperature of $51.8^{\circ}C$, reaction time of 4 hr 45 min, and an E/S ratio of 3.8%. It was demonstrated that the enzymatic hydrolysate of SPB could be used as a flavoring agent or a source of precursors for the production of reaction flavors.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.123-132
• /
• 2016

The importance of energy saving technology for managing greenhouse was recently highlighted. For practical use of energy in greenhouse, it is necessary to simulate energy flow precisely and estimate heating/cooling loads of greenhouse. So the main purpose of this study was to develope and to validate greenhouse energy model and to estimate annual/maximum energy loads using Building Energy Simulation (BES). Field experiments were carried out in a multi-span plastic-film greenhouse in Jeju Island ($33.2^{\circ}N$, $126.3^{\circ}E$) for 2 months. To develop energy model of the greenhouse, a set of sensors was used to measure the greenhouse microclimate such as air temperature, humidity, leaf temperature, solar radiation, carbon dioxide concentration and so on. Moreover, characteristic length of plant leaf, leaf area index and diffuse non-interceptance were utilized to calculate sensible and latent heat exchange of plant. The internal temperature of greenhouse was compared to validate the greenhouse energy model. Developed model provided a good estimation for the internal temperature throughout the experiments period (coefficients of determination > 0.85, index of agreement > 0.92). After the model validation, we used last 10 years weather data to calculate energy loads of greenhouse according to growth stage of greenhouse crop. The tendency of heating/cooling loads change was depends on external weather condition and optimal temperature for growing crops at each stage. In addition, maximum heating/cooling loads of reference greenhouse were estimated to 644,014 and $756,456kJ{\cdot}hr^{-1}$, respectively.

• Toxicological Research
• /
• v.29 no.3
• /
• pp.181-185
• /
• 2013

Aluminum nanoparticles (Al-NPs) are one of the most widely used nanomaterial in cosmetics and medical materials. For this reason, Al-NP exposure is very likely to occur via inhalation in the environment and the workplace. Nevertheless, little is known about the mechanism of Al-NP neurotoxicity via inhalation exposure. In this study, we investigated the effect AL-NPs on the brain. Rats were exposed to Al-NPs by nasal instillation at 1 mg/kg body weight (low exposure group), 20 mg/kg body weight (moderate exposure group), and 40 mg/kg body weight (high exposure group), for a total of 3 times, with a 24-hr interval after each exposure. Inductively coupled plasma mass spectrometry (ICP-MS) analysis indicated that the presence of aluminum was increased in a dose-dependent manner in the olfactory bulb (OFB) and the brain. In microarray analysis, the regulation of mitogen-activated protein kinases (MAPK) activity (GO: 0043405), including Ptprc, P2rx7, Map2k4, Trib3, Trib1, and Fgd4 was significantly over-expressed in the treated mice than in the controls (p = 0.0027). Moreover, Al-NPs induced the activation of ERK1 and p38 MAPK protein expression in the brain, but did not alter the protein expression of JNK, when compared to the control. These data demonstrate that the nasal exposure of Al-NPs can permeate the brain via the olfactory bulb and modulate the gene and protein expression of MAPK and its activity.

• Childhood Kidney Diseases
• /
• v.8 no.2
• /
• pp.159-165
• /
• 2004

Purpose: This study aimed to compare the clinical outcome of acute poststreptocaccal glomerulonephritis (APSGN) between patients who had presented with gross hematuria and those with microscopic hematuria. Methods: Thirty-nine patients with acute poststreptococcal glomerulonephritis, who were diagnosed from January 2000 to April 2003 were enrolled. Results: The mean age was 8.85 years and the male to female ratio was 1.1:1 Seventeen patients presented with gross hematuria at diagnosis(group A) and twenty-two patients had microscopic hematuria only(group B). There were no significant differences between the two groups in the incidence of edema, fever or history of respiratory infection and oliguria. But hypertension was more frequent in group B. Laboratory data showed decreased C3 and C4 level in group B. Spot urine protein/creatinine ratio and 24hr urine protein showed higher levels in group A. Conclusion; Patients with gross hematuria at diagnosis had lower incidence of hypertension and a higher rate of nephrotic range of proteinuna than patients with microscopic hematuria. However, no difference in the duration of admission or complication rate was observed. All patients had clinical improvement during follow-up. We conclude that gross hematuria is not a significant prognostic factor for poststreptococcal glomerulonephritis.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.227-232
• /
• 2010

Purpose: Continuous irrigation method is an important step in managing wound infection. V.A.C. devices have been used in intractable wounds for reducing discharge, improving local blood flow, and promoting healthy granulation tissue. We expect synergistic effects of reduced infection and more satisfactory, accelerated wound healing when using both methods simultaneously. This study evaluated continuous irrigation combined with V.A.C. appliance for treatment of infected chronic wounds. Methods: We reviewed data from 17 patients with infected intractable chronic wounds. V.A.C. device (Group A) was used in 9 patients, and V.A.C. with antibiotics irrigation (Group B) was used in 8 patients. We placed Mepitel$^{(R)}$ on the surface of wound and placed an irrigation and aspiration tube on each side. A sponge was placed on the Mepitel$^{(R)}$ and covered with film dressing. The wound was irrigated continuously with mixed antibiotics solution at the speed of 200 cc/hr and aspirated through the wall suction at the pressure of -125 mmHg. V.A.C. applied time, wound culture and wound size were compared between the two groups. Results: No complication were seen in two groups. Compared with Group A, in the Group B, V.A.C. applied time was shortened from 32.7 days to 25.6 days and showed efficacy in the reduction rate of wound size. No statistical differences were shown in bacterial reversion. Conclusion: V.A.C. appliance with continuous irrigation is an effective new method of managing infected chronic wounds and useful to reduce treatment duration and decrease wound size. Moreover it could be applied more widely to infected wound.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.189-193
• /
• 1985

A field experiment was conducted to find out the effects of tillage methods on the changes of soil physical properties and rice yields. Silty clay loam soil was treated with six kinds of different tillage methods, cultivator plow-rotary, rotary, tractor deep plow-rotary, subsoiling-rotary, chisel plow-rotary and no-tillage, and Jinju variety of rice was cultivated. The results were summarized as follows; 1. Working efficiency was highest at chisel plow and the efficiencies were decreased with the order of deep plow, subsoiling, rotary, and cultivator plow. 2. Deep plow and chisel plow were considered as the useful treatments of physical properties to 20 cm depth soil and subsoiling was effective to 40 cm depth soil. 3. Rice yields were decreased 4% by rotary and 11% by no-tillage compare to cultivator plow-rotary but the yields were increased 5% by deep plow, 4% by subsoiling and 3% by chisel plow. As the results of all the data, welting efficiency, soil physical properties and rice yields, tractor deep plow was recommendable tillage method for rice paddy soils.

• Journal of Korea Water Resources Association
• /
• v.39 no.9 s.170
• /
• pp.779-786
• /
• 2006

In this study, we propose a new method that utilizes rainfall data in and out of a basin, which is greater than 25.4mm for point rainfall or 12.7mm for areal mean rainfall respectively. From our analysis, most frequent quartile for point and areal mean rainfall were found to be the same in general for various rainfall duration intervals. From an evaluation of design rainfall per each rainfall duration distributed in time by the MOCT(Ministry of Construction and Transportation) version of Huff's method and this study, peak rainfall intensity by this study was found to be greater than the one by MOCT, but there were no consistent increase or decrease of this difference with rainfall durations. Using the distributed design rainfall per each duration by MOCT and this study, corresponding flood inflow hydrographs were simulated and compared each other. Contrary to the case of peak rainfall intensity, difference in peak flow by both methods per each rainfall duration started to increase from about 12-hr duration. Especially, the difference in peak flow was significant when critical rainfall duration was considered, and this trend was similar for peak flows of other rainfall durations. Therefore, the method proposed in this study is thought to be the effective procedure for the construction of dimensionless cumulative rainfall curve that is representative of a basin while considering time distribution characteristics for different rainfall durations.