• 폴리머
• /
• 제33권3호
• /
• pp.254-262
• /
• 2009

치환도(DS) 그리고 몰치환도(MS)가 각각 $2.10{\sim}2.71$ 그리고 $2.3{\sim}6.7$ 범위에 있는 9종류의 히드록시프로필 셀룰로오스들(HPCs) 그리고 $2.3\;{\le}\;MS\;{\le}\;6.7$인 HPC들을 이용하여 7종류의 완전치환 부타노화 HPCs(BPCs)를 합성함과 동시에 HPC들의 분자특성과 유도체들의 열방성 액정 특성을 검토하였다. DS가 작은 범위에서는 MS와 DS는 거의 동일하였다. 그러나, $DS{\gtrsim}1$인 범위에서는 DS에 비해 MS는 대단히 큰 경향을 나타냈다. 이러한 사실은 반응이 진행됨에 따라 프로필렌 옥사이드는 주사슬보다는 곁사슬들에 우선적으로 부가됨을 시사한다. 모든 유도체들은 우측방향의 나선구조를 지닌 쌍방성 콜레스테릭 상들을 형성하였다. HPC들 그리고 BPC들의 유리전이 그리고 액정 상에서 액체상으로 전이온도들은 MS가 증가함에 따라 낮아졌다. HPC 자체들과 동일하게 BPC들의 광학피치들(${\lambda}_m'S$)은 온도가 상승함에 따라 증가하였다. 그러나, HPC들 그리고 BPC들이 동일한 온도에서 나타내는 ${\lambda}_m$들은 MS가 증가함에 따라 증가하였다. 또한, HPC들이 나타내는 ${\lambda}_m$의 온도의존성은 BPC의 경우에 비해 약하였다. 이러한 사실은 셀룰로오스 사슬에 의한 나선의 비틀림력은 셀룰로오스 사슬에 도입된 곁사슬의 길이와 화학구조에 민감하게 의존함을 시사한다.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.451-458
• /
• 1999

TiC-Mo2C composites were prepared from Ti-C-Mo system by HPCS which has a great advantage of simulataneous synthesis and sintering In this study physical properties and microstructures of the com-posites were measured and observed to compare the sintering effects of Ni and Co each other : The results showed that the role of 5 wt% Ni in the sintering of the carbide composites was superior to that of 5wt% Co and the optimum content of Mo in the Ti-C-Mo system was 20wt% The carbide composites prepared under these two conditions had the best properties with 1.0% in apparent porosity 97.6% in relative density 19.1GPa in Vickers hardness and 5.3MPa$.$m1/2 in fracture toughness.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.231-238
• /
• 1998

Cr3C2 -dispersed TiC composites were prepared via HPCS(high pressure-self combustion sintering) pro-cess using mixtures of Ti, Cr and a carbon source for the purpose of increasing the facture toughness and sinterability of TiC. In this study the microstructure and properties of the composites were investigated in terms of relation to the carbon source the particle size of Ti and the amount of Cr. It was found that car-bon black was the most effective carbon source among the various carbon sources tested and the reaction was more effective as the particle size of Ti decreased. Among the sintered composites of Ti-C-Cr system the one with 30wt% Cr showed the best physical properties with 0.5% in apparent porosity 98.8% in re-lative density 18.2 GPa in hardness and 4.46 MPa.m1/2 in fracture toughness. In addition it was observed that the lattice constant of TiC decreased gradually with increasing the amount of Cr.

• 한국식품과학회지
• /
• 제23권3호
• /
• pp.317-324
• /
• 1991

옥수수 전분을 propylene oxide와 반응시켜 하이드록시프로필화 옥수수 전분을 제조한 후 물리화학적 특성을 조사하였다. DSC, Amylograph 등을 이용하여 호화특성을 조사한 결과 치환기가 증가할수록 호화온도가 낮아져 치환도가 DS 0.068 이상에서는 호화개시온도가 $59^{\circ}C$로 감자 전분의 호화온도인 $62^{\circ}C$ 보다도 낮았으며 DS $0.120{\sim}0.147$에서는 $53^{\circ}C$까지 떨어졌다. 호화시킨 전분을 $4^{\circ}C$에 저장하면서 노화속도를 측정한 결과 DS 0.120 이상에서는 $4^{\circ}C$에서 7일간 방치하여도 거의 노화가 일어나지 않아 하이드록시프로필화에 의하여 크게 억제되었다. 또한 하이드록시프로필화 시킨 옥수수 전분은 빛 투과도 증가 시작온도가 낮아졌으며 빛 투과도는 현저히 증가되었다. 옥수수 전분을 하이드록시프로필화 시켰을때 gel 형성시간은 늦어졌으며 gel 조직이 연해지고 겔 강도도 떨어졌다.

• Journal of Korean Neurosurgical Society
• /
• 제54권4호
• /
• pp.309-316
• /
• 2013

Objective : Intracranial hemangiopericytomas (HPCs) are rare tumors with aggressive behavior, including local recurrence and distant metastasis. We conducted this retrospective study to evaluate the efficacy of grossly total resection and adjuvant radiotherapy (RT) for these tumors. Methods : A total of 13 patients treated for intracranial HPC from January 1995 through May 2013 were included in this retrospective study. We analyzed the clinical presentations, radiologic appearances, treatment results, and follow-up outcomes, as well as reviewed other studies. Results : The ages of the patients at the time of diagnosis ranged from 26 to 73 years (mean : 48 years). The majority of the patients were male (92.3%), and the majority of the tumors were located in the parasagittal and falx. The ratio of intracranial HPCs to meningiomas was 13 : 598 in same period, or 2.2%. Seven patients (53.8%) had anaplastic HPCs. Nine patients (69.2%) underwent gross total tumor resection in the first operation without mortality. Eleven patients (84.6%) underwent postoperative adjuvant RT. Follow-up period ranged from 13 to 185 months (mean : 54.3 months). The local recurrence rate was 46.2% (6/13), and there were no distant metastases. The 10-year survival rate after initial surgery was 83.9%. The initial mean Karnofsky performance scale (KPS) was 70.8 and the final mean KPS was 64.6. Conclusion : Gross total tumor resection upon initial surgery is very important. We believe that adjuvant RT is helpful even with maximal tumor resection. Molecular biologic analyses and chemotherapy studies are required to achieve better outcomes in recurrent intracranial HPCs.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.473-482
• /
• 1997

Titanium carbide(TiC) has a poor sinterability due to the strong covalent bond. Thus, it is generally fabricated by either hot pressing or pressureless-sintering at elevated temperature by the addition of sintering aids such as nickel(Ni), molybdenum(Mo) and cobalt(Co). However, these sintering methods have the following disadvantages; (1) the complicated process, (2) the high energy consumption, and (3) the possibility of leaving inevitable impurities in the product, etc. In order to reduce above disadvantages, we investigated the optimum conditions under which dense titanium carbide bodies could be synthesized and sintered simultaneously by high pressure self-combustion sintering(HPCS) method. This method makes good use of the explosive high energy from spontaneous exothermic reaction between titanium and carbon. The optimum conditions for the nearly full-densification were as follows; (1) The densification of sintered body becomes high by increasing the pressing pressure from 400kgf/$\textrm{cm}^2$ upto 1200 kgf/$\textrm{cm}^2$. (2) Instead of adding the coarse graphite or activated carbon, the fine particles of carbon black should be added as a carbon source. (3) The optimum molar ratio of carbon to titanium (C/Ti) was unity. In reality, titanium carbide body which were prepared under optimum conditions had relatively dense textures with the apparent porosity of 0.5% and the relative density of 98%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.144.1-144.1
• /
• 2015

The triggered vacuum switch(TVS) is a one of the important component in consisiting high power control systems(HPCS). The operating condition is depended on material, geometry, operating power and so on. Our research is focused on the effects of thses basic properties and ptimized condition, because these are critical conditons in understanding the TVS operation. Our experiment is accomplished with a copper electrode and a tungsten trigger pin after being assembled into a vacuum chamber. The operating voltage in our system is more than dozens of kV at the 5kV trigger pulse. Our goal is up to 300kJ, therefore the currents should be more optimized in additional experiments,

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.565-572
• /
• 2000

To quantitatively estimate mass contribution of long-range transported yellow sand, their sources should be separated independently from various local soil sources having similar elemental compositions. While it is difficult to estimate total mass loadings of pure yellow sand by traditional bulk analysis, it can be clearly solved by an particle-by-particle analysis. To perform this study, two yellow sand samples and three local soil samples were collected by a mini-volume sampler. These samples were three analyzed using a scanning electron microscope(SEM) equipped with an energy dispersive x-ray analyser (EDX) was used to obtain basic chemical information of individual yellow san particles. A total of 19 elements in a single particle were measured to develop a source profile with newly created homogeneous particle classes (HPCs) as chemical variables. The present study showed that the yellow sand samples as well as three local soil samples were characterized with reasonably well created HPCs. Finally the mass fraction of each HPC in each sample was calculated and then compared each other.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.915-920
• /
• 2000

합성과 동시에 소결이 이루어지는 HPCS법을 이용하여 TiB$_2$-W 복합체를 텅스텐의 함량 변화에 다라 제조하여 이 복합체의 미세구조 및 기계적 물성에 대하여 연구하였다. 이 연구 결과, 텅스텐의 함량증가에 따라 삼성분 붕화 화합물인 TiWB$_2$의 상이 증가하였으며, 이 상의 증가에 따라 기계적 물성이 향상되었다. 60 MPa의 압력과 130$0^{\circ}C$, 3000 A에서 소결한 TiB$_2$-30vol% W 복합체에서 상대밀도, 강도, 경도 값은 각각 97.2%, 411.5 MPa, 22.36 GPa로 가장 우수한 물성을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.495-497
• /
• 2013

SiC-$Y_2O_3$ porous composites were fabricated using $Y_2O_3$ powders synthesized by sol-gel process to control physical and thermo-chemical properties. $Y_2O_3$ powders were mixed with SiC powders by co-pressing with HPCS (hydridopolycarbosilane) binder at moderate temperature. The properties of membranes were characterized by XRD, FE-SEM, and BET surface analysis. Hydrogen permeability was performed at various temperatures.