• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.395-403
• /
• 2012

This is direct bonding many of the metal bumps between FPCB and HPCB substrate. By using an ultrasonic horn mounted on an ultrasonic bonding machine, it is possible to bond gold pads onto the FPCB and HPCB at room temperature without an adhesive like ACA or NCA and high heat and solder. This ultrasonic bonding technology minimizes damage to the material. The process conditions evaluated for obtaining a greater bonding strength than 0.6 kgf, which is commercially required, were 40 kHz of frequency; 0.6MPa of bonding pressure; and 0.5, 1.0, 1.5, and 2.0 s of bonding time. The peel off test was performed for evaluating bonding strength, which was found to be more than 0.80 kgf.

• Animal Bioscience
• /
• v.34 no.2
• /
• pp.233-242
• /
• 2021

Objective: The aim of this study was to determine the effect of pineapple cannery by-product (PCB) level on the growth performance and carcass characteristics of finishing Hanwoo steers. Methods: The feeding stage was divided into early and late finishing stages. A total of 60 castrated Hanwoo steers (13.9±0.8 months old, 418.8±36.5 kg initial body weight [BW]) were blocked by initial BW and then randomly allotted into 12 pens (five head/pen). The pens were randomly assigned to control (CONT), low PCB (LPCB), or high PCB (HPCB) treatments. These diets contained 0%, 1.5%, or 3.0% of PCB (on a dry matter [DM] basis; as-fed basis was 0%, 10.6%, or 21.2%), respectively. Results: For the early finishing stage, body weight gain (BWG) and average daily gain (ADG) of the CONT and LPCB feeding groups were greater (p<0.05) than those of the HPCB feeding group. In addition, there were linear and quadratic effects on BWG and ADG with increasing dietary PCB level (p<0.05). The gain to feed (G:F) ratio tends to quadratically decrease with an increasing PCB level in the early finishing stage (p = 0.076). Growth performances of late finishing stage were not affected by PCB level. The marbling score of the LPCB feeding group was similar to that of the CONT feeding group. However, there was a linear decrease (p< 0.05) in marbling score and quality grade among treatments as PCB was increased in the diet. In the longissimus muscle free amino acid profile, histidine composition increased linearly (p<0.05) with an increasing level of PCB. Conclusion: The level of PCB 1.5% DM in diet can be used for finishing steers without any adverse effects on growth and carcass performances. However, there were some negative effects on growth and carcass performance in the HPCB feeding group.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.471-472
• /
• 2011

• Journal of Welding and Joining
• /
• v.29 no.1
• /
• pp.52-58
• /
• 2011

In this paper, the direct bonding process between FPCB and HPCB was studied. By using an ultrasonic horn which is mounted on the ultrasonic bonding machine, it is alternatively possible to bond the gold pads attached on the FPCB and HPCB at room temperature without an adhesive like ACA or NCA. The process condition for obtaining more bonding strength than 0.6 Kgf, which is commercially required, was carried out as 40 kHz of frequency, 0.6 MPa of bonding pressure and 2 second of bonding time. The peel off test was performed for evaluating bonding strength which results in more than 0.8 Kgf.