• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.1
• /
• pp.103-112
• /
• 1999

This is study to estimate the pump induced vibration in time and frequency domain by frequency response function between two points in case of 20Hp and 50Hp centrifugal pumps. The frequency response function has real and imaginary information of signals, and response function has also real and imaginary information. So the vibration force can be obtained from the response function and frequency response function by complex calculation. And it is compared with the theoretically estimated values and it is suggested that the amplitude of vibration with main frequency is about 10~25% of pump and motor weight, and the magnitude of unbalanced mass is about 30~60% of pump and motor weight to estimated vibration force in time domain. There are the other kinds of vibration components with different frequency values of 2~3 times of its main frequency, and these kinds of information are used to control the tuning ratio between operating frequency of pump and structural frequency of concrete slab.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.3
• /
• pp.147-154
• /
• 2020

Background: Single inferior alveolar nerve block is ineffective in achieving adequate pulpal anesthesia in 30-80% of patients due to anatomical variations, local tissue pH, central sensitization, and several factors. Various supplementary techniques and combination of adjuvants with lignocaine are used to overcome these failures. Magnesium sulfate (MgSO₄), one such adjuvant, acts at the N-methyl-D-aspartate glutamate receptor resulting in effective anesthesia. The aim of this prospective, randomized, double-blind, clinical controlled trial was to evaluate the onset, anesthetic efficacy, duration and post-operative analgesia of 2% lignocaine with and without the addition of MgSO₄ in patients with symptomatic irreversible pulpitis and apical periodontitis. Methods: Fourty-two patients were randomly divided into three groups: 2% lignocaine (group 1) and 2% lignocaine with MgSO₄ (75 mg) and (150 mg) in groups 2 and 3, respectively. Pre-operative vitals and Heft Parker-Visual Analogue Scale (HP-VAS) pain scores were recorded. The onset of anesthesia, anesthetic efficacy, and duration of anesthesia were evaluated post administration of the local anesthetic solution. The post-operative analgesia was examined at intervals of 2, 6, 12, 24, and 48 h. Results: Administration of 150 mg MgSO₄ hastens the onset of anesthesia (1.29 min) and produces better anesthetic efficacy (3.29 HP-VAS) compared to group 2 (2.07 min and 9.14 HP-VAS) and group 1 (3.29 min and 35.79 HP-VAS), respectively. The duration of anesthesia was significantly higher in group 3 (247.07 min) compared to that of groups 2 and 1 (190 min and 110.21 min) with P < 0.05. Conclusion: Combining 75 mg or 150 mg of MgSO₄ with lignocaine is more effective than 2% lignocaine and 75 mg of MgSO₄ is adequate for endodontic procedures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.22-26
• /
• 2014

This research was implemented to investigate pre-harvest sprouting characteristics in two Korean rice cultivars, Shindongjin (SDJ) and Hopum (HP). The panicles of both varieties were sampled after 15 days after heading (DAH) to 60 DAH at intervals of 5 days. As soon as sampled, the panicles were imbibed in water for 14 days at $25^{\circ}C$ to determine the vigor and germination ability of seeds according to location on panicle. To investigate the cause of non-germination of seeds in panicles, tetrazolium test and dormancy breaking were performed. The preharvest sprouting of HP started at 20 DAH while that of SDJ began at 30 DAH. The germination of seeds located in high rank branches within a panicle and the terminal seeds within a branch were earlier and faster and the germination patterns were same in both cultivars. The times at more than 50% of germination in a panicle were 35 DAH (57.0%) in HP and 45 DAH (56.8%) in SDJ. Preharvest sprouting was more than 80% at 50 DAH (82.6% of HP, 92.3% of SDJ) and more than 99% at 60 DAH (99.5%, 99.4%, HP and SDJ). These results indicated that the rate of PHS in a panicle increased with accumulation of the days after heading. The cause of non-germinated seeds at 15-25 DAH in panicle was immature embryo. After 30 DAH, however, when the non-germinated seeds were hulled, they started to germinate due to dormancy breaking, in which the germination percentage was higher in SDJ than HP. In conclusion, the pre-harvest sprouting varied according to days after heading, the seed position on panicle, and the dormancy intensity of varieties.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.216-220
• /
• 2011

PURPOSE. Heat of composite polymerization (HP) indicates setting efficacy and temperature increase of composite in clinical procedures. The purpose of this in vitro experimental study was to evaluate the effects of 5 temperatures on HP of two new composites. MATERIALS AND METHODS. From each material (Core Max II [CM] and King Dental [KD]), 5 groups of 5 specimens each were prepared and their total HPs (J/gr) were measured and recorded, at one of the constant temperatures $0^{\circ}C$, $15^{\circ}C$, $23^{\circ}C$, $37^{\circ}C$ and $60^{\circ}C$ ($2{\times}5{\times}5$ specimens) using a differential scanning calorimetry (DSC) analyzer. The data were analyzed using a two-way ANOVA, a Tukey's test, an independent-samples ttest, and a linear regression analysis (${\alpha}=0.05$). RESULTS. No polymerization reactions occurred at $0^{\circ}C$; then this temperature was excluded from statistical analyses. The mean HP of the remaining 20 KD specimens was $20.5{\pm}14.9$ J/gr, while it was $40.7{\pm}12.9$ J/gr for CM. The independent-samples t-test showed that there were significant differences between the HP of the two materials at the temperatures $15^{\circ}C$ (P=.0001), $23^{\circ}C$ (P=.0163), $37^{\circ}C$ (P=.0039), and $60^{\circ}C$ (P=.0106). Linear regression analysis showed statistically significant correlations between environment temperatures and HP of CM ($R^2=0.777$). CONCLUSION. Using CM is advantageous over conventional composite because of its better polymerization capacity. However due to its high HP, further studies should assess its temperature increase in vivo. Preheating KD is recommended. Refrigerating composites can negatively affect their polymerization potential.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.8-15
• /
• 2002

We optimally designed the VCO(voltage-controlled oscillator) with spiral inductor using the MOSIS HP 0.5${\mu}{\textrm}{m}$ CMOS process. With the developed SPICE model of spiral inductor, the quality factor of spiral inductor was maximized at the operating frequency by varying the layout parameters, e.g., metal width, number of turns, radius, space of the metal lines. For the operation frequency of 2㎓, the inductance of about 3nH, and the MOSIS HP 0.5 CMOS process with the metal thickness of 0.8${\mu}{\textrm}{m}$, oxide thickness of 3${\mu}{\textrm}{m}$, the optimal width of metal lines is about 20${\mu}{\textrm}{m}$ for the maximum Quality factor. With the optimized spiral inductor, the VCO with LC tuning tank was designed, fabricated and measured. The measurements were peformed on-wafer using the HP8593E spectrum analyzer. The oscillation frequency was about 1.610Hz, the frequency variation of 250MHz(15%) with control voltage of 0V - 2V, and the phase noise of -108.4㏈c(@600KHz) from output spectrum.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.476-483
• /
• 2012

This paper introduces the method for efficiency improvement of 5HP electric thrusting system for outboard motor. The most efficient model of motor and propeller is suggested and verifying its performance through the prototype model. Also, We show improvement of 20% compared to existing system through the equipped test.

• Journal of Life Science
• /
• v.7 no.3
• /
• pp.186-191
• /
• 1997

In order to select new anticandiosis agent-producing candidates, we used a modified selection method. Two active fractions designated as S-6279A) and (B) were isolated from the fermentation broth of Streptomycetes sp. S627 which was screened by methanol extraction, diaion HP-20 and silica gel column chromatography (chloroform-me-thanol, and benzene-ethyl acetate), and preparative thin layer chromatography.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.577-580
• /
• 1995

During the screening for the antimicrobial agents against multidrug-resistant Staphylococcus aureus, we isolated an active compound produced by strain CNU30122. The active compound was purified from culture broth by HP-20 column chromatography, ethylacetate extraction. silica gel column and Sephadex LH-20 column chromatographies and HPLC. Based on various NMR studies including $^1H-^1H\;COSY$, $^1H-^{13}C\;COSY$ and HMBC experiments. the active compound was identified as fusidic acid.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.366-369
• /
• 2000

The soluble paclitaxel was found in the supernatant of the plant cell cultures of Taxus chinensis, The percentage of soluble paclitaxel depends on paclitaxel concentration in bioreactor. As paclitaxel concentration decreases the percentage of soulbe paclitaxel increases. it is therefore important to develop a new process for the recovery of soluble paclitaxel. The use of hydrophobic resin HP20 gives nearly perfect recovery of paclitaxel in supernatant. The resin was more effective in treatment of th cell and debris free filtrate probably because of the reduced solids content In this case 3 g.l resin and 1 day reaction were enough for recovery the soluble paclitaxel in medium.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.163-166
• /
• 2007

The cytotoxic effects of partially purified substances from Bacillus polylfermenticus SCD toward a variety tumor cell lines were studied. Cytotoxic activity was determined with regard to the A549 (human lung carcinoma), AGS (human stomach adenocarcinoma), DLD-1 (human colon adenocarcinoma), HEC-1-B (human uterus adenocarcinoma), SW-156 (human kidney carcinoma), and NIH/3T3 (murine normal fibroblast) cell lines using the MTT assay. Cytotoxic substances were partially purified through Diaion HP-20 columns and extracted with methanol or other organic solvents (n-hexane, chloroform, ethylacetate, and butanol). B. polyfermenticus SCD supernatant showed up to 60% inhibition of cell viability fer all five human cancer cell lines tested. When treated with 10 mg/mL of n-hexane, chloroform, ethylacetate, and butanol extract, HEC-1-B cells showed a 25,62,35, and 63% rate of inhibition respectively, and AGS cells showed a 72, 61, 44, and 67% rate of inhibition, respectively. At a concentration of 10 mg/mL, 100% methanol Diaion HP-20 extracts showed inhibition rates of 97.0% toward A-549 cells, 98.1% toward AGS cells, 81.6% toward DLD-1 cells, 83.5% toward HEC-1-B cells, and 92.7% toward SW-156 cells. These results indicate that partially purified fractions from B. polyfermenticus SCD have the potential to inhibit not only colon cancer cells, but also lung, stomach uterus, and kidney cancer cells. Further studies are needed to characterize the cytotoxic substances released in B. polyfermenticus SCD cultures.