• KSBB Journal
• /
• v.22 no.5
• /
• pp.328-335
• /
• 2007

In this work ursolic acid (UA), a poorly water-soluble compound, was inclusion complexed with 2-hydroxypropyl-$\beta$-cyclodextrin (HP-$\beta$-CD) by various methods such as kneading, solvent evaporation and two types of supercritical fluid processes. The solubility and characteristics of these UA/HP-$\beta$-CD complexes were investigated by scanning electron microscopy, x-ray diffraction and HPLC. The water solubilities of the two complexes obtained from solvent evaporation and ASES processes were observed to increase up to 6$\sim$240 folds and 12$\sim$56 folds, respectively, compared with that of unprocessed UA. The stability of UA/HP-$\beta$-CD complex samples in cosmetic formulations was examined at various temperatures for one month. The UA/HP-$\beta$-CD complex prepared by solvent evaporation was found to be most stable among all the cosmetic formulations tested in our experiments.

• Journal of Life Science
• /
• v.21 no.8
• /
• pp.1094-1099
• /
• 2011

Antimicrobial efficacy of high pressure (HP) can be enhanced by the application of additional hurdles. The objective of this study was to assess the enhancement in pressure lethality by tert-butylhydroquinone (TBHQ) treatment, against bacterial spores that are considered significant in the food industry. Spores of Clostridium sporogenes, Bacillus cereus and B. subtilis were prepared. Spore suspensions containing TBHQ (200 ppm, dissolved in dimethyl sulfoxide, DMSO) were pressurized at 650 or 700 MPa at 54-72$^{\circ}C$ for 5 min. Inactivation of bacterial spores resulted only with HP treatment. The population of B. subtilis spores was more inactivated by HP than those of B. cereus and C. sporogenes spores. Inactivation of C. sporogenes spores using pressure was more affected by the germinated population, compared to Bacillus spores. The inactivation of Bacillus spores increased when pressurized at 70$^{\circ}C$, compared to 54$^{\circ}C$. On the other hand, the degree of germination-induced lethality for Bacillus spores decreased at 70$^{\circ}C$. When spores were treated with a combination of DMSO-HP and TBHQ-HP, these treatments seemed to protect the spores against HP, especially at 54$^{\circ}C$. Further mechanistic studies involved in inducing germination by HP and using a subsequent sporicidal agent will be needed for a better understanding of bacterial spore inactivation.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.135-141
• /
• 1997

The early studies demonstrated that the relative amount of FSH was important for stimulating normal ovarian activity and demonstrated the existence of a threshold level for FSH, above which follicular growth was activated. It was found that only a modest increase in circulating FSH level above the threshold (between 10 and 30%) was required to stimulate folliculogenesis. In addition, FSH is primary responsible for initiating estradiol production through the activation of the aromatase enzyme system in granulosa cells, follicular secretion and growth. LH on the other hand, plays a supportive role in ovarian steroidogenesis, stimulating the ovarian thecal cells to produce androgen, the precursor for estradiol synthesis. But there is now an increasing number of reports in the literature demonstrating an adverse effect of LH on fertility and miscarriage in infertile and fertile women. So HP-FSH is the drug of a highly purified FSH preparation which has a higher specific activity and far fewer impurities than FSH. This study was performed to evaluate the efficacy and safety of HP-FSH administered (SC; subcutaneous) versus FSH(IM; intramuscular) for ovulation induction. 20 candidates patients for ovulation induction were participated. All patients underwent pituitary desensitizing with a long gonadotropin-releasing hormone (GnRH) agonist protocol and ovulation induction was started with HP-FSH SC (10 patients; group I) or FSH IM (10 patients; group II). After ovulation, outcome of ovulation induction and local reaction of injection site were compared. There were no difference of outcome of ovulation in two groups except pregnancy rate/embryo transfer. Group I had a higher pregnancy rate/ embryo transfer than Group II (44.4% Vs 28.6%). Pain, redness, tenderness, bruising and itching when the injection received on the first 5 days of treated (50 SC and 50 IM injections) were assessed. There were no significant difference (P>0.05) in the incidence of tenderness, bruising and itching between the IM and SC injection. But IM injection (FSH) had a tendency of higher above incidence. The number of reports of pain, redness were significantly increased in IM injection group (P<0.05). These results indicate that SC administration of HP-FSH has been shown to be as effect for superovulation as traditional gonadotropins, with an improved safety profile due to the removal of extaneous proteins.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.21-33
• /
• 2007

Statement of problem: The esthetic component of dental care has become increasingly more important, while new tooth-colored materials are continually marketed. Various new indirect composite materials have been developed with required advantages. The most recent development in the indirect composites has been the introduction of the second-generation laboratory composite or poly-glass materials. They are processed by different laboratory techniques based on combinations of heat, pressure, vacuum and light polymerization. Although, second generation products became available in 1995, their characteristics and clinical performance have not been adequately investigated. Purpose: The aim of this study was to measure the mechanical properties of the second generation indirect resin system and compare these with an existing universal direct composite resin. Material and method: In this study four indirect composite material (Adoro LC, BelleGlass HP, Tescera, Synfony) were tested for flexural strength, wear resistance, hardness and their degree of conversion against Z250, a light cure direct composite. Results: Within the limitations of this study, the following conclusions were drawn: 1. From the abrasion wear result, Adoro showed the least volume loss while Synfony showed the greatest volume loss. Z250 and BelleGlass HP didn't show significant difference (p>0.05), but they showed significant difference with other groups (p<0.05). From the attrition wear, BelleGlass HP showed the least volume loss and it didn’t show significant difference with Tescera (p>0.05). While Synfony showed the greatest volume loss that it showed significant difference with other groups (p>0.05). 2. Mean values of flexural strength by means of three point bending test was in the order of Z250, Adoro, Belleglass HP, Tescera and Synfony. Mean elastic modulus was in the order of Z250, BelleGlass HP, Tescera, Adoro and Synfony. 3. The result of Vicker‘s microhardness value showed that significantly higher value in Z250 (p<0.05), and is in the order of BelleGlass HP, Tescera, Adoro and Synfony. 4. The degree of conversion measured by FT-IR showed significantly higher value in BelleGlass HP (p<0.05), and is in the order of Adoro, Synfony, Tescera and Z250. Conclusion: Significant differences were found in the flexural strength, wear resistance, hardness and their degree of conversion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.558-563
• /
• 2013

The present study was conducted to estimate energy requirements for maintenance in laying hens by using indirect calorimetry and energy balance. A total of 576 28-wk-old Nongda-3 laying hens with dwarf gene were randomly allocated into four ME intake levels (86.57, 124.45, 166.63 and 197.20 kcal/kg body weight $(BW)^{0.75}$ per d) with four replicates each. After a 4 d adaptation period, 36 hens from one replicate were maintained in one of the two respiration chambers to measure the heat production (HP) for 3 d during the feeding period and subsequent 3 d fast. Metabolizable energy (ME) intake was partitioned between heat increment (HI), HP associated with activity, fasting HP (FHP) and retained energy (RE). The equilibrium FHP may provide an estimate of NE requirements for maintenance (NEm). Results showed that HP, HI and RE in the fed state increased with ME intake level (p<0.05). Based on the regression of HP on ME intake, the estimated ME requirements for maintenance (MEm) was 113.09 kcal/kg $BW^{0.75}$ per d when ME intake equals HP. The FHP was decreased day by day with the lowest value on the third day of starvation. Except for lowest ME intake level, the FHP increased with ME intake level on the first day of starvation (p<0.05). The FHP at the two higher ME intake levels were greater than that at the two lower ME intake levels (p<0.05) but no difference was found between the two lower ME intake levels. Linear regression of HP from the fed state to zero ME intake yielded a value of 71.02 kcal/kg $BW^{0.75}$ per d, which is higher than the extrapolated FHP at zero ME intake (60.78, 65.23 and 62.14 kcal/kg $BW^{0.75}$ per d for the first, second and third day of fasting, respectively). Fasting time, lighting schedules, calculation methods and duration of adaptation of hens to changes in ME intake level should be properly established when using indirect calorimetry technique to estimate dietary NE content, MEm and NEm for laying hens.

• Nutrition Research and Practice
• /
• v.8 no.4
• /
• pp.404-409
• /
• 2014

BACKGROUND/OBJECTIVES: The number of diabetic patients has recently shown a rapid increase, and delayed wound healing is a major clinical complication in diabetes. In this study, the wound healing effect of Hominis placenta (HP) treatment was investigated in normal and streptozotocin-induced diabetic mice. MATERIALS/METHODS: Four full thickness wounds were created using a 4 mm biopsy punch on the dorsum. HP was injected subcutaneously at the middle region of the upper and lower wounds. Wounds were digitally photographed and wound size was measured every other day until the 14th day. Wound closure rate was analyzed using CANVAS 7SE software. Wound tissues were collected on days 2, 6, and 14 after wounding for H/E, immunohistochemistry for FGF2, and Masson's trichrome staining for collagen study. RESULTS: Significantly faster wound closure rates were observed in the HP treated group than in normal and diabetes control mice on days 6 and 8. Treatment with HP resulted in reduced localization of inflammatory cells in wounded skin at day 6 in normal mice and at day 14 in diabetic mice (P < 0.01). Expression of fibroblast growth factor (FGF) 2 showed a significant increase in the HP treated group on day 14 in both normal (P < 0.01) and diabetic mice (P < 0.05). In addition, HP treated groups showed a thicker collagen layer than no treatment groups, which was remarkable on the last day, day 14, in both normal and diabetic mice. CONCLUSIONS: Taken together, HP treatment has a beneficial effect on acceleration of cutaneous wound healing via regulation of the entire wound healing process, including inflammation, proliferation, and remodeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5344-5351
• /
• 2013

Chambers in a continuous furnace were designed. A chamber consists of inlets and outlets of nitrogen gas which is used to discharge burned gas and heating pipes (HP) which are used to keep temperature of fired materials at $1,300^{\circ}C$. Design variables were numbers of inlets and outlets, distance between floor and lower HP ($h_1$), distance between lower HP and fired materials ($h_2$), distance between fired materials and upper HP ($h_3$), temperature of HP, numbers of HP and distance between HP. The numbers of inlets and outlets were determined so that nitrogen gas formed a laminar flow for efficient discharge. All other design variables were determined so that temperature of fired materials is as uniform as possible near $1,300^{\circ}C$. Chambers were produced and temperature was measured at 21 points using thermocouples. The largest deviation from $1,300^{\circ}C$ was less than ${\pm}2.2^{\circ}C$.

• Fisheries and Aquatic Sciences
• /
• v.13 no.4
• /
• pp.294-299
• /
• 2010

The effects of dietary nutrient composition on compensatory growth of grower olive flounder (Paralichthys olivaceus) under different feeding regimes at suboptimal temperature were determined. Four hundred five fish weighing 271.2 g were distributed into 27 300 L flow-through tanks (15 fish per tank). Nine treatments were prepared in triplicate: fish were hand-fed with control (C) diet for 12 weeks (12WF-C); four groups of fish were starved for 1 week and then fed C, high-protein (HP), high-lipid (HL), or combined high-protein and high-lipid (HPL) diets for 11 weeks; these groups are referred to as 11WF-C, 11WF-HP, 11WF-HL, and 11WF-HPL, respectively. Four other groups of fish were starved for 2 weeks and then fed C, HP, HL, and HPL diets for 10 weeks; these groups are referred to as 10WF-C, 10WF-HP, 10WF-HL, and 10WF-HPL, respectively. Weight gain and specific growth rate of fish from 12WF-C group were greater than those of fish from 11WF-C, 11WF-HP, 11WF-HL, 10WF-C, 10WFHP, and 10WF-HL groups, but not different from those of fish from 11WF-HPL and 10WF-HPL groups. Feed-efficiency ratio of fish from 12WF-C, 11WF-HP, 11WF-HPL, 10WF-HL, and 10WF-HPL groups was higher than that of fish in 11WF-C, 11WF-HL, 10WF-C, and 10WF-HP groups. The results of this study demonstrated that grower olive flounder subjected to 1- or 2-week feed deprivation were able to achieve full compensatory growth at suboptimal temperature only when fed HPL diet.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.2
• /
• pp.387-391
• /
• 2007

Recently, much attention has been paid to developing various kinds of fermented herbal extracts, a new type of traditional herbal medicine, in the field of Korean traditional medicine. The fermentation of medicinal herbs is intended to exert a favorable influence on digestability, bioavailavility and pharmacological activity of herbal extract in the gastrointestinal tract. It also produces a number of fermentation products that intensify the nutritional and pharmacological aspects of the medicinal herbs. In order to develop a functional beverage of alleviating the aftereffects of the previous drinks, the extracts (HP-1) of fermented herbal mixture, including Artemisia capillaris Thunb., Lonicera japonica Thunberg, and Hovenia dulcis Thunb., were prepared and the medicinal effect as a hangover cure was evaluated in ethanol-loaded rats. The enzyme activities of alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase-2 (ALDH2) were analyzed by measuring the concentration of blood ethanol and acetaldehyde. The mRNA expression of ADH and ALDH2 was also investigated through RT-PCR analysis. In the HP-1-treated group, the concentration of blood ethanol was significantly reduced at one hour after loading of ethanol, as compared to that in the saline-treated group. The reduced ethanol was converted to acetaldehyde, which resulted in rapid increase in acetaldehyde concentration in an hour. Acetaldehyde was started to decrease at 5 hours after ethanol loading. It implies that HP-1 is highly effective to stimulate the activities of ADH and ALDH2. The HP-1 treatment also activated the mRNA expression of ADH and ALDH. This study suggests that fermented herbal extract, HP-1 can be used as a functional beverage of alleviating the alcohol-induced hangover symptoms by stimulating the activities and gene expression of hepatic alcohol metabolizing enzymes.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1026-1032
• /
• 2015

This study attempted to find an efficient method for the preparation of high-purity galactooligosaccharides (HP-GOS) using ${\beta}$-galactosidase and yeast fermentation. GOS prepared using Lactozym 3000L showed the greatest enhancement in total GOS of the six ${\beta}$-galatosidases tested. GOS alone achieved 51% conversion of initial lactose. GOS production was enhanced by fermentation with commercial yeast (Saccharomyces cerevisiae); its concentration reached 71% after 36h fermentation with 8% yeast. Component sugar analysis with HPLC indicated that HP-GOS fermented with S. cerevisiae showed significantly increased levels of 4'/6'-galactosyllactose and total GOS as well as a significantly decreased glucose level. HP-GOS facilitated the growth of Lactobacillus sp. (L. acidophilus and L. casei) and Bifidobacterium sp. (B. longum and B. bifidum). In sum, high-purity GOS has been successfully produced through both an enzymatic process and yeast fermentation. GOS encourages the growth of bacteria such as Lactobacillus and Bifidobacterium that may be beneficial to human gastrointestinal health.