• Imaging Science in Dentistry
• /
• v.38 no.2
• /
• pp.95-101
• /
• 2008

Purpose: To assess the positional relationship between the maxillary sinus floor and the apex of the maxillary first molar using cone beam computed tomograph (CBCT). Materials and Methods: CBCTs from 127 subjects were analysed. A total of 134 maxillary first molars were classified according to their vertical and horizontal positional relationship to the maxillary sinus floor and measured according to the distance between the maxillary sinus floor and the maxillary first molar. Results: Type III (The root projected laterally on the sinus cavity but its apex is outside the sinus boundaries) was dominated between 10 and 19 years and type I (The root apex was not in contact with the cortical borders of the sinus) was dominated (P<0.05) between 20 and 72 years on the vertical relationship between the maxillary sinus floor and the apex of the maxillary first molar. The maxillary sinus floor was located more at the apex (78.2%) than at the furcation (21.3%) for the palatal root. The distance from the root apex to the maxillary sinus floor confined to type I was increased according to the ages (P<0.05). Type M (The maxillary sinus floor was located between the buccal and the palatal root) was most common (72.4%) on the horizontal relationship between the maxillary sinus floor and the apex of the maxillary first molar. Conclusion: CBCT can provide highly qualified images for the maxillary sinus floor and the root apex of the maxillary first molar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.92-97
• /
• 2004

Traumatic injuries in the young peranent dentition are common, but root fractures, defined as fractures in volving dentin, cementum and pulp, are relatively uncommon. Case 1 is a 9-year-old boy who had a horizontal root fracture of his maxillary right central incisor in the apical third. Root canal therapy was performed in coronal segment and calcium hydroxide therapy was initiated. Six months after treatment, a periapical radiograph showed calcific tissue formation and normal root development. 1 year and 3 months later, the canal was permanently obturated with gutta-percha. Case 2 is a 7-year-old girl who had a vertical root fracture of her maxillary right central incisor. Fractured tooth was intentionally extracted atraumatically, and then the separated fragments are bonded with resin cement. the restored tooth was replanted into the original socket. Recalls up to 8 months showed normal mobility and no periapical pathosis. In these cases, we performed conservative treatment. Clinical and radiographic examination showed no pathosis or abnormality of the teeth and periodontal tissue.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.2
• /
• pp.200-206
• /
• 2016

Root fracture is defined as a fracture involving the dentin, cementum, and pulp. Most fractures occur in the maxillary anterior teeth between the ages of 11 and 20 years old. The treatment for root fracture in permanent teeth involves the reduction and fixation of the displaced coronal segment. When signs of pulp necrosis or inflammatory root resorption are present, root canal therapy should be performed. Since most apical fragments maintain pulp vitality, root canal therapy is typically limited to coronal fragments. However, it's too difficult to achieve a proper apical stop on coronal fragment. Intentional replantation involves performing root apex treatment outside the mouth after intentional extraction of the tooth in a controlled environment and then replanting it. The objective is 'perfect' root canal therapy. Intentional replantation may be used in cases of failed typical root canal therapy, problematic endodontic retreatment due to the existing restoration or a calcified root canal, and when apical surgery is contraindicated because of a lack of reasonable approaches. In this case, intentional replantation was carried out to treat a horizontal root fracture in a maxillary central incisor with a calcified root canal due to previous trauma. We achieved a clinically and functionally satisfactory result.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.649-658
• /
• 1994

The purpose of this study was to evaluate the association between incisor root resolution and sex, age, extraction, the magnitude and direction of tooth movement. The sample consisted of 189 randomly selected orthodontic patients, receiving standard edgewise orthodontic treatment in three private orthodontic onces at San Francisco. Pre-treatment and post-treatment periapicals and cephalometric radiographs were digitized. Measurements and superimpositions were made utilizing a computerized cephalometric analysis program. The variables were statistically analyzed. The results were as follows: 1. Mean apical root resorption values were $0.77{\pm}2.08mm$ for upper right central incisor, $0.88{\pm}2.11mm$ for upper left central incisor, $-0.05{\pm}2.09mm$ for lower right central incisor and $0.11{\pm}1.85mm$ for lower left central incisor. Apical root resorption of upper incisor was greater than lowers. 2. No correlation was found between sex and apical root resorption. 3. Apical root resorptions in adolescents were smaller than those in adults. 4. Apical root resorption was not affected by extraction. 5. Apical root resorption values of upper incisor were correlated to the horizontal and vertical movement of apex; Apical root resorption values of lower incisor were correlated to the vertical movement of apex.

• Wind and Structures
• /
• v.16 no.3
• /
• pp.241-248
• /
• 2013

The wind turbine blade is a very important part of the rotor. Extraction of energy from wind depends on the design of blade. In this work, the analysis is done on a blade of length 38.95 m which is designed for V82-1.65 MW horizontal axis wind turbine (supplied by Vestas). The airfoil taken for the blade is NACA 634-221 which is same from root to tip. The analysis of designed blade is done in flap-wise loading. Two shapes of the spar are taken, one of them is of square shape and the other one is combination of square and cross shape. The blade and spar are of the same composite material. The Finite element analysis of designed blade is done in ANSYS. This work is focused on the two segments of blade, root segment and transition segment. Result obtained from ANSYS is compared with the experimental work.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.3
• /
• pp.14-22
• /
• 2023

Background: This study was to investigate the relationship between scapular downward rotation ratio (SDRR), lower trapezius (LT) muscle, and rounded shoulder angle (RSA) on each side in subjects with scapular downward rotation syndrome (SDRS). Design: Cross-sectional Study Methods: Fifteen subjects have participated in this study. The RSA and SDRR were assessed using a tape measure in standing posture. The RSA was computed by the angle made by two lines: one was the distance between the root of the scapula and the acromion, and the other was the distance between the acromion and the horizontal line in the root of the scapula. The SDRR was computed by two horizontal lines: one was the distance between the mid-line and root of the scapula, and the other was the distance between the mid-line and inferior angle of the scapula. LT muscle strength was performed in a prone position by the hand-held dynamometer. Results: There was a positive correlation between SDRR and LT strength in the less affected sides (r=.59; p=.02), however, there was no correlation between RSA and LT strength in the more affected sides (p>.05).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.6
• /
• pp.77-84
• /
• 2004

This study was carried out to analyze the vertical and horizontal distribution of fine root biomass of Pinus thunbergii transplanted in reclaimed land from the sea near Gwangyang Bay. The fine-root biomass according to 6 planting ground types were as follows: 98.5 g DM/$m^2$ for P2, 51.1 g DM/$m^2$ for P6, 47.8 g DM$m^2$ for P5, 44.6 g DM/$m^2$ for P3, 38.2 g DM/$m^2$ for P4, 31.8 g DM/$m^2$ for Pl, respectively. The vertical distribution of fine root biomass decreased at descending soil depths of the 6 mounding types. Fine root biomass was 31∼55% in the topsoil of 20cm depth. Fine root biomass that were related to the Spatial distance from the nearest tree were unevenly distributed horizontally in 6 stands. distribution patterns of fine root biomass were closely related to soil hardness and alkalic cation (Ca++, Mg++, Na+, K+) concentrations. Therefore, in order to have good condition for the growth of landscaping plants, we suggest that there is a need for the construction of planting grounds as well as a need for soil improvement in bad soil environments.

• Journal of Welding and Joining
• /
• v.21 no.3
• /
• pp.40-45
• /
• 2003

The high-speed rotating arc process forms a flat bead surface with decreased penetration depth because the molten droplets are deflected by centrifugal force. Therefore the rotating arc welding for horizontal fillet welding increases the leg length with the increase of rotation frequency and prevents the deflection of weld bead and overlap. In this study, the relationship between the welding parameters and the weld bead shape - leg length and undercut - are investigated experimentally. Consequently, the weld quality could be improved by rotating arc welding, and sound weld bead was achieved when applied to horizontal fillet welding with 4mm gap by avoiding the undercut which is inevitable for the conventional GMA welding methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.321-327
• /
• 2017

In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a $2^{nd}$ regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

• Structural Engineering and Mechanics
• /
• v.30 no.4
• /
• pp.427-444
• /
• 2008

A mathematical model for the nonlinear dynamics of a rotating beam with flexible root attached to a rotating hub with elastic foundation is developed. The model is developed based on the large planar and flexural deformation theory and the potential energy method to account for axial shortening due to bending deformation. In addition the exact nonlinear curvature is used in the system potential energy. The Lagrangian dynamics and the assumed mode method is used to derive the nonlinear coupled equations of motion hub rotation, beam tip deflection and hub horizontal and vertical displacements. The derived nonlinear model is simulated numerically and the results are presented and discussed for the effect of root flexibility, hub stiffness, torque type, torque period and excitation frequency and amplitude on the dynamic behavior of the rotating beam-hub and on its stability.