• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.866-870
• /
• 1995

This study was conducted to determine the effect of soluble polysaccharides and indigestible polysaccharides on the digestibility of casein in vitro and the structure of polysaccharide. The digestibility of casein by trypsin in vitro was reduced to $80{\sim}89%$ and $69{\sim}99%$ by high molecular soluble polysaccharide (HMS-P) and low molecular insoluble polysaccharide (LMI-P) prepared from buckwheat, respectively. The digestibility of casein by chymotrypsin was reduced to $63{\sim}88%$ and$71{\sim}79%$ by HMS-P and LMI-P, respectively. But casein digestibiliy by trypsin and chymotrypsin was slightly reduced by LMS-P. The casein hydrolyzates inhibited by HMS-P gave a main peak in the void volume on Sepadex G-100, but the peak in the total volume was only appeared in case of LMS-P having no inhibito교 effect. It was suggested that the HMS-P was consisted of 4-linked and 4,6-dissubstituted glucose from the structural analysis by GC.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.852-857
• /
• 1990

The rheological properties and food functionality of the novel sugar derivatives, fructo-oligosaccharide, high maltose syrup(HMS), maltitol and sorbitol were examined and compared to those of sucrose. All samples tested showed Newtonian fluid property at the concentration range of 10% to the original concentrated products containing $69{\sim}81%w/w$ solid. HMS showed the highest viscosity. The viscosity increased(r=0.8038) as the average molecular weight of sugar derivatives were increased. The viscosity increased exponentially as the concentration increased, and sugar alcohols had lower value of the exponent compared to HMS and fructo-oligosaccharide. The viscosity of sugar derivatives solutions decreased by the increasing temperature following the Arrhenius equation. The flow activation energies of sorbitol and HMS were higer than that of sucrose. Substitution of sucrose with fructo-oligosaccharide in apple jam processing did not change the textural characteristics, but in redbean jelly(yanggaeng) it reduced the hardness, adhesiveness, springiness and cohesiveness. When sucrose was 100% replaced by HMS, the texture of apple jam and redbean jelly was not changed, but by mixing sucrose and HMS 1 : 1 ratio, the hardness decreased substantially The sugar alcohols reduced the hardness, adhesiveness, springiness of apple jam and redbean jelly significantly. Addition of fructo-oligosaccharide and HMS to sucrose did not influence the solidifying rate of candy, but sorbitol, even at 10% addition, retarded the candy moulding.

• Journal of Korea Water Resources Association
• /
• v.33 no.S1
• /
• pp.281-287
• /
• 2000

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.840-845
• /
• 2006

본 연구는 수리.수문 모형화에서의 시공간 자료 분석기술 개발에 관한 연구로서, 국내 GIS엔진인 GeoMania를 기반으로 하여 개발된 HyGIS와 수리.수문 연계모형을 확립하였으며, 주요 연구 결과로, 현재 국내에서 가장 보편적이고 광범위하게 적용되고 있는 HEC-HMS 모형과 HEC-RAS 모형을 선정하여 사용자의 편의성을 도모하고, 모형의 입 출력 구조, GIS와의 연계방안 등을 분석하여 제시하였다. 또한 HyGIS-HMS 모형과 HEC-RAS 모형의 개발은 국내 GIS엔진인 GeoMania-Pro와 Add-ON 방식으로 연계되어 구동되며, 입력자료는 GeoMania-Pro 프로그램 상에서 GUI에 의한 대화식으로 구성되었다. 하나의 시스템 상에서 DEM의 구축과 종합적인 유역분석 및 체계적인 하천에 대한 지형학적 자료구축과정을 제시하였고, 국내 하천유역 및 하도망의 Geo DB와 연계되는 시스템으로 구성하였다. Thiessen 계수 계산 결과에 신뢰성을 제고하였고, CN값 구성과정은 국내 유역상황과 자료구축과정에 적합하도록 개발하였다. 또한, GRID를 이용한 하천에 대한 지형학적 자료구축 과정에 있어 보다 정확한 계산이 가능하도록 구성되었고, HyGIS-HMS 모형 및 HyGIS-RAS 모형에 대한 입력자료의 구성이 편리하도록 GUI를 이용한 입력자료 구성 모듈이 적용되었고, 이러한 입력자료가 파일로 구성이 되어 각 모형에 적용될 수 있는 형태로 구성되었다. 본 연구는 HEC-HMS 및 HEC-RAS를 이용한 HyGIS-HMS 모형과 HyGIS-RAS 모형을 개발함로써 국내유역에 대한 수리 수문 모델링시 사용자들이 하나의 GIS 엔진상에서 필요한 제반사항을 모두 구현할 수 있도록 구성되어, 엔지니어링 회사, 수자원기술자, 수자원관련 연구자들에 의해서 활용될 수 있을 것이다.이 보다 향상될 것이다.>에서 $0.0190m^3/s$로, 갈수량$(Q_{355})$은 $0.0176m^3/s$에서 $0.0189m^3/s$로 약 7%가 증가하는 것으로 분석되었다. 결과로부터 침투 트렌치는 저수량 및 갈수량을 증가시키는 보조수단이 될 수 있다.해 보았다. 뿐만 아니라 이와 관련된 수문요소기술을 확보할 수 있을 것이다.역의 물순환 과정을 보다 명확히 규명하고자 노력하였다.으로 추정되었다.면으로의 월류량을 산정하고 유입된 지표유량에 대해서 배수시스템에서의 흐름해석을 수행하였다. 그리고, 침수해석을 위해서는 2차원 침수해석을 위한 DEM기반 침수해석모형을 개발하였고, 건물의 영향을 고려할 수 있도록 구성하였다. 본 연구결과 지표류 유출 해석의 물리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.342-346
• /
• 2015

Haloacetonitriles (HANs) are nitrogenous disinfection by-products (DBPs) that have been reported to have a higher toxicity than the other groups of DBPs. The adsorption process is mostly used to remove HANs in aqueous solutions. Functionalized composite materials tend to be effective adsorbents due to their hydrophobicity and specific adsorptive mechanism. In this study, the removal of dichloroacetonitrile (DCAN) from tap water by adsorption on thiol-functionalized mesoporous composites made from natural rubber (NR) and hexagonal mesoporous silica (HMS-SH) was investigated. Fourier-transform infrared spectroscopy (FTIR) results revealed that the thiol group of NR/HMS was covered with NR molecules. X-ray diffraction (XRD) analysis indicated an expansion of the hexagonal unit cell. Adsorption kinetic and isotherm models were used to determine the adsorption mechanisms and the experiments revealed that NR/HMS-SH had a higher DCAN adsorption capacity than powered activated carbon (PAC). NR/HMS-SH adsorption reached equilibrium after 12 hours and its adsorption kinetics fit well with a pseudo-second-order model. A linear model was found to fit well with the DCAN adsorption isotherm at a low concentration level.

• Smart Structures and Systems
• /
• v.5 no.3
• /
• pp.223-240
• /
• 2009

As in any engineering application, the problem of structural assessment should face the different uncertainties present in real world. The main source of uncertainty in Health Monitoring System (HMS) applications are those related to the sensor accuracy, the theoretical models and the variability in structural parameters and applied loads. In present work, two methodologies have been developed to deal with these uncertainties in order to adopt reliable decisions related to the presence of damage. A simple example, a steel beam analysis, is considered in order to establish a liable comparison between them. Also, such methodologies are used with a developed structural assessment algorithm that consists in a direct and consistent comparison between sensor data and numerical model results, both affected by uncertainty. Such algorithm is applied to a simple concrete laboratory beam, tested till rupture, to show it feasibility and operational process. From these applications several conclusions are derived with a high value, regarding the final objective of the work, which is the implementation of this algorithm within a HMS, developed and applied into a prototype structure.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1214-1218
• /
• 2005

Ti-HMS samples in which titanium species exist in various forms of isolated tetrahedral state, finely dispersed $TiO_2$ cluster, and some in extra-framework anatase phase were prepared via a direct synthesis route using dodecylamine (DDS) as a structure directing agent by systematically varying the titanium loadings between 2 and 50 mol% Ti/(Ti+Si) in substrate composition. Physicochemical properties of the materials were evaluated using XRD, SEM/TEM, N2 adsorption, UV-vis and XANES spectroscopies. Catalytic properties of Ti-HMS in cyclohexene and 2,6-di-tert-butyl phenol (2,6-DTBP) oxidation using aqueous $H_2O_2$, and vapor phase photocatalytic degradation of acetaldehyde were evaluated. High $H_2O_2$ selectivity was obtained in cyclohexene oxidation, and cyclohexene conversion was found primarily dependent on the amount of tetrahedrally coordinated Ti sites. For bulky 2,6-DTBP oxidation and photocatalytic oxidation of acetaldehyde, on the other hand, conversions were found dependent on the total amount of Ti sites and maintaining an uniform mesoporous structure in the catalysts was not critical for efficient catalysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.377-383
• /
• 2016

Recently, research on bone fracture and osteoplasty using ultrasonic bone surgery unit has been ongoing in the fields of dentistry, plastic surgery, and otorhinolaryngology. However, detailed data evaluation with ultrasonic bone surgery unit has not been conducted to date. In this study, we developed handpiece moving system (HMS) for cutting performance evaluation. In the experimental setup of HMS, a handpiece was immobilized, and bone samples from cortical bone of bovine leg were prepared. Also, the experimental process was described in detail, and a basic experiment was carried out to evaluate the cutting performance. Future study is required on all experimental process conditions by HMS.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.10-17
• /
• 2010

In a passive sonar, the improvement of detection performance by using noise cancellation is usually a important problem. In this paper, we have analyzed the own-ship noise cancellation in the two operation modes which are used in the HMS system. In the operator mode, an adaptive line enhancer(ALE) is applied to improve the tonal detection by using broadband noise cancellation and the normalized least mean square(NLMS) algorithm is applied to the design of an adaptive filter. The reference input that is correlated with a primary input can be used to remove the noise incident on the observation directionin the automatic mode. Computer simulations with real sea that data show that the proposed adaptive noise canceller has good performance in passive detection under HMS operation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.17-27
• /
• 2008

In this study, three different unit hydrograph methods (Snyder, SCS, Clark) in the HEC-HMS were compared to find better fit with the observed data in the small agricultural watershed. Baran watershed, having $3.85km^2$ in size, was selected as a study watershed. The watershed input data for HEC-HMS were retrieved using HEC-GeoHMS which was developed to assist making GIS input data for HEC-HMS. Rainfall and water flow data were monitored since 1996 for the study watershed. Fifty five storms from 1996 to 2003 were selected for model calibration and verification. Three unit hydrograph methods were compared with the observed data in terms of simulated peak runoff, peak time and total direct runoff for the selected storms. The results showed that the coefficient of determination ($R^2$) for the observed peak runoff was $0.8666{\sim}0.8736$ and root mean square error, RMSE, was $5.25{\sim}6.37\;m^3/s$ for calibration stages. In the model verification, $R^2$ for the observed peak runoff was $0.8588{\sim}0.8638$ and RMSE was $9.57{\sim}11.80\;m^3/s$, which were slightly less accurate than the calibrated data. The simulated flood hydrographs were well agreed with the observed data. SCS unit hydrograph method showed best fit, but there was no significant difference among the three unit hydrograph methods.