• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.77-77
• /
• 2003

디스플레이 소재나 자동차 글레이징 소재에 있어서 경량화나 충격성을 향상시키기 위하여 플라스틱소재를 기재로 응용하는 연구가 진행되고 있다. 본 연구에서는 폴리에틸렌테레프탈레이트(PET)와 폴리카보네이트(PC) 고분자 필름의 내마모성, Haze 성, 내수증기 차단성 등을 향상시키기 위하여 유기실리콘 전구체인 HMDSO 모노머와 산소를 사용하여 플라즈마 도움화학증착(PECVD) 하였다. RF출력과 HMDSO 투입량, 산소투입량을 변화시키면서 각 증착조건에 따른 생성된 필름의 화학결합구조와 표면조도, 헤이즈 특성에 미치는 영향을 FTIR-ATR, AFM, Hazemeter를 이용하여 알아보았다. HMDSO와 산소를 사용한 박막의 증착은 100 nm/min이상의 높은 증착속도를 가졌고, 증착실험에서 얻은 증착필름의 원소조성을 XPS를 이용하여 구한 결과, 종전의 다른 유기실리콘계 모노머를 사용했을 때보다 효과적으로 박막에 존재하는 탄소잔류물을 감소시키는 것을 확인하였으며, FTIR-ATR결과로 부터 플라스틱 기재의 차이로 인한 생성박막의 결합구조가 다름을 알 수 있었다. 본 연구로부터 HMDSO/02 시스템이 탄소함량이 낮은 박막을 형성시키고 내마모도가 좋은 박막을 증착시키는데 효과적인 것을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.212-212
• /
• 2013

$SiO_2$ 박막은 절연막 및 보호막 소재로 다양하게 사용되고 있다. 본 연구에서는 $HMDSO/O_2$ PECVD를 이용하여 $SiO_2$ Roll-to-Roll 증착 공정을 연구하였다. 약 300 mm급 선형 플라즈마 소스를 이용하여, PET 기판 상에 $SiO_2$ 박막을 연속 증착하였으며, $HMDSO/O_2$ 분압에 따른 증착 박막의 특성을 FT-IR, XPS, AFM을 통해 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.328-328
• /
• 2011

Wetting phenomena have been heavily studied for industrial and academic researches especially tuning the wettability between hydrophilicity and hydrophobicity. Wicking through the surface texture is shown on superhydrophilic surface while rolling (or dewetting) on the patterns of superhydrophobic surface. These wetting phenomena are known to be affected by surface wettability determined with physical surface patterns as well as chemical composition of surface layer. In this research, we introduce a method to control the wettability of a thin C-SiOx film from hydrophobic to hydrophilic using a mixture gas of HMDSO/$O_2$ by plasma polymerization with rf-CVD (radio frequency-Chemical Vapor Deposition). Wettability was finely controlled by changing the ratio of HMDSO/$O_2$. Hydrophilicity increased as the ratio decreased, while hydrophobicity was enhanced by the ratio. Moreover, fine control from superhydrophilicity to superhydrophobicity was achieved by C-SiOx coating on the Si wafer with prepatterns of submicron-sized pillar array formed by $CF_4$ plasma etching.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.182-188
• /
• 2001

Thin films of $SiO_xC_y$ deposited by means of PECVD(plasma enhanced chemical vapor deposition) using HMDSO(hexamethyldisiloxane)/$O_2$ were characterized. The effects of deposition conditions such as RF power, oxygen flow rate and hydrogen flow rate on the chemical bond structure, atomic composition, surface roughness and wear characteristics of the films were investigated by means of FTIR, XPS, AFM and Hazemeter. The deposition rate of $SiO_xC_y$ was greater than 100 nm/min, which is relatively high rate. The XPS results showed that the carbon content in a deposited film was lower than that of previous studies where different organosilicone materials were used. The optimum wear resistance was attained when RF power was 200 Watt and oxygen flow rate was 100 sccm. This study implies that the $HMDSO/O_2$ system is effective in forming a film with a lower carbon content and good abrasion resistance.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.38-42
• /
• 2008

Ultrathin films were coated on low density Polyethylene (LDPE) food packaging films by plasma polymerization of methane, acetylene, hexamethyldisiloxane (HMDSO), and HMDSO+oxygen to improve the barrier property of the LDPE films. The film coated in HMDSO +oxygen (flow rate: 0.6+ 9.0 SCCM) plasma at 40 W for 10 min showed the highest improvement in the barrier property against oxygen, reducing the permeability of oxygen as much as 18.6 times. The film coated in acetylene (flow rate 0.75 SCCM) plasma at 10 W for 10 min showed the highest improvement in the barrier property against carbon dioxide and moisture, reducing the permeability of carbon dioxide and moisture as much as 12.0 and 3.0 times, respectively. In addition, cherry tomato, cucumber, and mushroom (Flammulina velutipes) wrapped with the coated films were kept fresh $1.5{\sim}3.0$ times longer than those wrapped with an LDPE film.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.656-662
• /
• 2015

In the present study, multi-layered Si DLC (Silicon Diamond-Like Carbon) coatings with HMDSO (Hexamethyldisiloxane) buffer layers are applied on SKD 11 substrates by PECVD (Plasma Enhanced Chemical Vapor Deposition) with different HMDSO gas flow rates, while the gas flow rate of $C_2H_2$ is fixed to enhance the electric resistivity of forming dies for electrically assisted forming. The HMDSO buffer layer is introduced to increase adhesion between the base metal and Si-DLC layers. The result of evaluation of electric resistivity and adhesion strength shows that the properties are affected by the flow rate of HMDSO, while the flow rate of 80 sccm results in the coating with the highest electric resistivity and adhesion strength among the selected flow rates.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.186-186
• /
• 2012

최근 Flexible organic electronics 분야에 대한 관심과 더불어 소자의 산소 및 수분의 침투를 방지하기 위한 투습방지막 연구가 활발히 진행되고 있다. 이에 본 연구에서는 Closed Drift Linear Source(CDLPS) 플라즈마 공정을 이용하여 저온 고속의 $SiO_xC_yH_z$ barrier flims 형성 연구를 진행하였다. HMDSO(hexamethyldisiloxane), TMS(trimethylsilane)와 산소를 기반으로 HMDSO/HMDSO+산소의 비율에 따라 $Si(-O_x)$ 변화에 따른 특성 평가를 진행하였다. X-ray photoelectrom spectroscopy(XPS) 및 Ft-IR spectrometer 측정 시 3.7% 비율에서 실리콘 원소가 산소 라디칼과 효율적인 반응을 함으로써 단일한 $SiO_2$ 박막이 형성됨을 확인 하였다. 그와 반면에 비율의 증가로 인해 다량의 HMDSO 물질이 주입 되었을 시 산소 라디칼과 충분히 반응 되지 못하여 $SiO_2$에 비해 $Si(CH)_x$ 가 많이 함량 된 Polymer like한 $SiO_x$가 많이 형성되었다. 박막의 증착율의 경우에는 3.7%에서 18%로 증가함에 따라 35 nm/min에서 180 nm/min의 증착율을 가지는 것을 확인 하였다. 3.7% 비율의 단일 $SiO_2$ 공정 조건으로 유기태양전지에 형성 하였을 시 소자의 에너지 변환 효율(PCE)이 변화 없는 것을 확인하였다. 이는 기존 공정에 비해 CDLPS 플라즈마 공정의 경우 유기소자에 플라즈마로 인한 열에너지나 이온 충격 에너지로 인한 영향 없는 것을 확인 할 수 있다. 이런 장점을 통해 CDSPS를 이용한 공정 기술은 다양한 유기 소자의 barrier 형성 연구에 큰 도움이 될 것이다.

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.125-133
• /
• 2017

Objectives: This study compared the effect of hexamethyldisiloxane (HMDSO) and ammonia ($NH_3$) plasmas on the bond strength of resin cement to fiber posts with conventional treatments. Materials and Methods: Sixty-five fiber posts were divided into 5 groups: Control (no surface treatment); $H_2O_2$ (24% hydrogen peroxide for 1 min); Blasting (blasting with aluminum oxide for 30 sec); $NH_3$ ($NH_3$ plasma treatment for 3 min); HMDSO (HMDSO plasma treatment for 15 min). After the treatments, the Ambar adhesive (FGM Dental Products) was applied to the post surface (n = 10). The fiber post was inserted into a silicon matrix that was filled with the conventional resin cement Allcem Core (FGM). Afterwards, the post/cement specimens were cut into discs and subjected to a push-out bond strength (POBS) test. Additionally, 3 posts in each group were evaluated using scanning electron microscopy. The POBS data were analyzed by one-way analysis of variance and the Tukey's honest significant difference post hoc test (${\alpha}=0.05$). Results: The Blasting and $NH_3$ groups showed the highest POBS values. The HMDSO group showed intermediate POBS values, whereas the Control and $H_2O_2$ groups showed the lowest POBS values. Conclusion: Blasting and $NH_3$ plasma treatments were associated with stronger bonding of the conventional resin cement Allcem to fiber posts, in a procedure in which the Ambar adhesive was used.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.79-83
• /
• 2009

Thin electric insulation layers were coated on aluminum plates and aluminum condenser cases by plasma polymerization of HMDSO+$O_2$. Electric resistances of the films were higher than 1.0 M$\Omega$ if they are thicker than 0.5 ${\mu}m$ independently of the type of films but their surface morphologies and adhesion strengths were dependent on the process conditions. Deposition rate and adhesion strength of the films were dependent on $O_2$/HMDSO flow ratio and discharge power. The best result was obtained at $O_2$/HMDSO flow ratio of 4 and discharge power of 60 W. Adhesion strength could also be highly improved if aluminum was pre-treated in boiling water for 30 min through the formation of Al-O-Si bonding between the film and the aluminum surface. The coated films showed excellent chemical and thermal resistances.

• Composites Research
• /
• v.26 no.3
• /
• pp.170-174
• /
• 2013

Atmospheric glow plasma polymerization was applied to wood powder before fabricating polypropylene (PP) matrix composites. Seven different types of monomers (Oxygen, Benzene, CH4, Acrylic-acid, Hexafluoroethane, Trifluorotolune, Hexamethyl-disiloxane) were analyzed to determine the most suitable precursor for plasma polymerization. The surface energy was calculated from measured contact angle about each monomer on PP. Hexamethyl-disiloxane (HMDSO) had a highest surface energy and is selected as the most suitable monomer. Wood powder and polypropylene were mixed as pellets by twin screw extruder and then 50 wt% wood powder/PP composites were produced by an injection machine. Tensile strength and Flexural strength have improved by 7.59% and 12.43% at the maximum respectively. SEM (Scanning Electron Microscope) observation on the fracture surface revealed that the plasma polymerization have improved the interfacial bonding and the mechanical properties of the composites.