• Radiation Oncology Journal
• /
• v.4 no.1
• /
• pp.75-80
• /
• 1986

Heterotopic bone formation is a complication which occurs in 0.6 to $61.7\%$ of patients after total hip replacement arthroplasty. We reviewed 4 patients (8 hips) who received postoperative irradiation on their hi ps for prevention of heterotopic bone formation in the Department of Therapeutic of Therapeutic Radiology, Seoul National University versify Hospital from January 1981 through August 1985. Radiation therapy was started 6 to 10 days postoperatively with the dosage of 2,000 cGy given in 10 fractions. As a result, 7 hips had Grade 0 and 1 hip had Grade 1 heterotopic ossification according to modified Blocker system. Our result and review of the literatures strongly support that the postoperative radiotherapy is effective for prevention of heterotopic bone formation in high risk group.

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.145-160
• /
• 2005

On the subjects of the female adults in their 20s who love to wear jeans, the wearing reality of basic jean pants and engineered jean pants was examined while pattern comparison and the evaluation of appearance and functions were made to reach the following conclusions: 1. Wearing reality of engineered jean pants Among the examined subjects, 74.8% were found out to favor engineered jean pants. Those who have engineered jean pants turned out to pursue well-known brands more than practicality. 2. Pattern comparison analysis of basic jean pants and engineered jean pants Though similar sizes existed in pants tips and belt width, engineered jean pants showed bigger values in waist circumference, crotch circumference, hip circumference, knee circumference, thigh circumference and so on. There were no big differences in the front part except for the items like crotch circumference and crotch length, but engineered jean pants had bigger sizes in the rear part. Engineered jeans in the rear contained the outward curved silhouette of the legs, curved tips, and a dart design instead of a back yoke. 3. Evaluation of appearance and functions In the scores of appearance, basic jean pants were higher at 3.65 in the order of front > side > back. On the contrary, engineered jean pants were excellent in the order of side > back > front. In the items of functions, engineered jean pants were higher at 4.23 in the order of hips > thighs> waist > abdomen > knee > crotch. On the other hand, basic jean pants showed the order of knee > crotch & thighs > abdomen > hips > waist. In every movement, engineered jean pants revealed higher functionality. In particular, the bigger physical movement led to the greater functional differences between the two kinds of jean pants.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.535-547
• /
• 2009

This study presented a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. For this purpose of this study, 6 jeans have been tested after washing finishing and we turned out appropriate shrinkage rate by evaluating the exterior of jeans and usage satisfaction. Then, a making method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was 2.6${\sim}$5.2cm, hips circumference was 1.3${\sim}$4.2cm, thigh circumference was 0.8${\sim}$3.1cm and knee circumference was 0.7${\sim}$2.5cm. Also, hem circumference was 0.5${\sim}$1.8cm and pants length was 4.0${\sim}$6.2cm. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.461-474
• /
• 2008

The purpose of this study was to present a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. Research Method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was $2.5{\sim}5.2cm$, hips circumference was $-1.8{\sim}2.8cm$, thigh circumference was $-1.3{\sim}2.0cm$ and knee circumference was $-1.0{\sim}1.7cm$. Also, hem circumference was $-1.0{\sim}1.8cm$ and pants length was $2.9{\sim}6.2cm$. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.309-318
• /
• 2012

This study aimed to find the components of visual image by researching main image-related adjectives applied to high-waist skirts. In addition, it compared and analyzed the differences and mutual influences of visual images according to variations in the waistline and skirt length of high-waist skirts. The researchers made nine high-waist skirts-combinations of three different levels of waistlines and skirt lengths. The test involved 121 people who hold degrees in the field of Clothing and Textiles. The panels tested actual images of all models wearing the high-waist skirts shown on a computer screen. The results of the study are as follows.: Four factors affected the visual image as waist-height and skirt-length changed: attractiveness, upper-body compensation, length compensation, and hips compensation. Among these factors, attractiveness was estimated as the most important factor. The torso and the hip were highlighted as the waistline increased from 3cm to 11cm, due to the optical illusion of a tighter skirt wrapping the bust, waist, and hips. As the waistline increased, the stature and leg length increased, possibly revising the overall appearance. For the skirt length, a length measuring 20cm above the knees, proved to be most attractive. This resulted in elongated height and leg length, and a slimmer overall look.

• Clinics in Orthopedic Surgery
• /
• v.10 no.4
• /
• pp.393-397
• /
• 2018

Background: The purpose of our study was to evaluate the usefulness of hip arthroscopy including extensive capsulectomy for synovial chondromatosis of the hip. Methods: From 2008 to 2016, 13 patients with synovial chondromatosis of the hip were treated with arthroscopic removal of loose bodies and synovectomy using three arthroscopic portals. An extensive capsulectomy was performed to allow the remaining loose bodies to be out of the extracapsular space, and the excised capsule was not repaired. All patients were assessed by clinical scores and the radiographs were reviewed to determine whether the remaining loose bodies disappeared at the last follow-up. Results: Eight men and two women were followed up for a minimum of 1 year (mean, 3.8 years; range, 1 to 6.8 years) after hip arthroscopy. Clinical outcomes such as modified Harris hip score, University of California Los Angeles score, and Western Ontario and McMaster Universities Osteoarthritis Index score improved at the last follow-up. Although seven hips had remaining loose bodies after arthroscopic surgery, the remaining loose bodies disappeared in five hips (71.4%) at the last follow-up. Conclusions: Arthroscopic surgery was useful to treat synovial chondromatosis of the hip. In spite of limited removal of loose bodies, arthroscopic procedures including extensive capsulectomy could be effective for the treatment of synovial chondromatosis of the hip.

• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.603-614
• /
• 2023

Body shape is the most influential factor in determining the quality of clothing fit. Women's body shape begins to change significantly in their mid-30s; therefore, this study aimed to classify and analyze the torso shapes of women aged 35-54 years. This study selected 200 3D body scans of women from the 8th Size Korea Survey database (2021). Using the Grasshopper algorithm developed in a previous study, 17 landmarks were automatically detected and 57 measurement values were generated. Using principal component analysis, 11 components (overall body size, upper body length, back protrusion, upper body slope, neck position, neck inclination, hip length, bust prominence, abdominal prominence, shoulder slope, and buttock prominence) were extracted. Three torso types were identified using K-means cluster analysis. The three body types were significantly different on nine component scores. Among the three torso types, Type 1 (37.5%) has the longest upper body and the flattest back and hips. Type 2 (31.0%) has the most curved back and forward upper body. Its abdomen is the flattest, and its shoulders are the most sloped. Type 3 (31.5%) has the shortest upper body, the most protruding hips, and the largest overall body size. This paper proposes two discriminant functions for identifying a new person's torso type.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.3
• /
• pp.113-120
• /
• 2002

Injection molded plastic parts have many surface defects. These include a weld line, sink mark, flow mark, gloss, shading, scratching etc. Because these surface faults are not aesthetically acceptable, plastic parts are produced through painting or texturing. The purpose of this paper is to develop paintless molded parts using a flow control method. Computer aided injection mold filling simulations were used in order to minimize the number of defects from injection molding. Based on the numerical results, FR(Flame Retardant) HIPS was developed and the guidelines for part design, mold design, and the processing conditions were established. The effects of cost savings, improvements in productivity, and recycling were considered by reducing the number of surface faults and eliminating the painting process.