• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.2
• /
• pp.9-16
• /
• 2010

Objectives : This study is planned to classify different biomechanics of men and women, from the comparison of normal range and hip internal rotation angle in chronic low back pain patients. Methods : We measured the hip internal rotation angle of the 30 men and 30 women patients with low back pain that has been over 3 months in BuCheon Jaseng Hospital of Oriental medicine. We set 35-45 degrees as normal range, and found the patients with exceeding normal range, the patients with normal range, and the patients with under normal range. Results : Men appeared to have less hip internal rotation angle than women. Especially, the men's left hip internal rotation angle was less than normal range. On the other hand, women's right hip internal rotation angle was often larger than normal range which was stastically significant. Conclusions : Contraction of hip external rotation muscle including gluteus maxius muscle and piriformis muscle in men, or relaxation of posterior gluteus medius, gluteus maxius and piriformis muscle with contraction of tensor fasciae latae, a part of hip internal rotation muscle, in women seems to be the basis for biomechanics of chronic low back pain.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.2 no.1
• /
• pp.9-17
• /
• 2004

The purpose of this study are to determine the proper radiographic measurements for hip deformity in spastic cerebral palsy patients, and the correlation of hip deformity with neurological involvement, ability of ambulation. Thirty children with cerebral palsy(22 males, 8 females) were evaluated by measurement of the migration index, acetabular index, center edge angle from bilateral hip APs(anterior posterior view). The result are as follows; 1. The incidence of hip dislocation, among the thirty children fifteen children were found to be dislocated, and more significantly high in non-walking group than in walking group(p<0.05) and in quadriplegia than in diplegia(p<0.05). 2. When compared to normal hip and dislocation hip, the migration index was significantly higher(p<0.01) and the center edge angle was lower in the dislocation hip than in the normal hip. 3. Correlation of radiological findings in right and left hip, the migration index and the center edge angle were highly correlated(p<0.01). We recommand regular intervals X-ray study for early diagnosis and management of hip dislocation in spastic cerebral palsy.

• The Journal of Korean Physical Therapy
• /
• v.31 no.2
• /
• pp.117-121
• /
• 2019

Purpose: Hip rotation testing is important in the evaluation of chronic back pain. The purpose of this study was to investigate hip and lumbopelvic movement during hip medial rotation (HMR) in individuals with chronic lower back pain (CLBP). Methods: This study targeted 112 subjects in total: 28 healthy males and 28 healthy females, and 27 males with CLBP and 29 females with CLBP. Motion-capture device was used to measure the hip medial rotation angle (HMRA), lumbopelvic rotation angle (LPRA), and the rotation angle of the hip when lumbopelvic rotation starts during hip medial rotation. Results: When evaluating the healthy males and females using the hip medial rotation test (HMRT), healthy males showed a smaller HMRA than did healthy females (p<0.05). When evaluating the healthy males and the males with CLBP using the HMRT, males with CLBP showed a smaller HMRA and more lumbopelvic movements than did healthy males (p<0.05) in addition, their lumbopelvic movements occurred earlier during HMR (p<0.05). Finally, when evaluating the males and the females with CLBP using the HMRT, males with CLBP showed a smaller HMRA and more lumbopelvic movements (p<0.05), and their lumbopelvic movements occurred earlier during HMR (p<0.05). Conclusion: The HMRT is an important test for the evaluation of males, and especially males with CLBP, as they often experience an increased LPRA and decreased HMRA, with lumbopelvic movement occurring earlier during HMR when compared to other groups.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.161-163
• /
• 2010

본 연구의 목적은 등속성 운동수행 및 측정시 hip joint angle에 따라 대퇴근육의 concentric 과 eccentric 근력차이를 분석하기 위하여 등속성 기기 의자 등받이 경사각도를 $100^{\circ}$, $120^{\circ}$, $140^{\circ}$에서 peak torque를 검사하였다. 대상자는 20대 초반의 건강한 남자 대학생 12명을 대상으로, 등속성 기기(Isomed 2000, Germany)를 이용하여 seated position에서 $60^{\circ}/s$ 의 각속도를 사용하여 검사를 수행하였다. 측정순서는 등속성기기 의자 등받이 경사각도 $100^{\circ}$, $120^{\circ}$, $140^{\circ}$ 순으로 2-3일 간격으로 진행하였다. 통계처리 방법은 SPSS 12.0 프로그램을 이용하여 평균과 표준편차를 산출하였으며, 각각의 hip angle에 따른 단축성과 신장성 peak torque 값의 차이는 one-way ANOVA(3RM)을 이용하여 처리하였고, 사후검증은 Tukey를 사용하였으며, 유의수준은 p<.05로 하였다. 연구결과 대퇴사두근의 단축성 근력은 등속성 기기 의자 등받이 경사각 $100^{\circ}$, $120^{\circ}$, $140^{\circ}$사이에 유의한 차이(p=.000)가 나타나 사후 분석결과 $100^{\circ}$와 $120^{\circ}$ 사이(p<.01) 그리고 $100^{\circ}$와 $140^{\circ}$ 사이(p<.001)에 유의한 차이를 나타내었으며, 신장성 근력에서는 유의한 차이가 나타나지 않았다. 햄스트링의 단축성 근력은 3종류의 hip angle사이에 유의한 차이(p=.001)가 나타나 사후분석결과 $100^{\circ}$와 $140^{\circ}$사이(p<.05) 그리고 $120^{\circ}$와 $140^{\circ}$ 사이(p<.01)에 유의한 차이를 나타내었으며, 그러나 신장성 근력에서는 유의한 차이가 나타지 않았다. 이러한 결과로 미루어 볼 때 등속성 운동수행 및 근력측정 시 hip joint angle 에 따라 대퇴사두근과 햄스트링의 단축성 근력에서 유의한 차이가 나타나 hip joint angle을 고려하여 대퇴근육의 운동및 측정이 이루어져야 할 것으로 사료된다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1183-1194
• /
• 2006

The aim of this study was to identify the characteristics of the flexion withdrawal reflex modulated by the hip angle and hip movement in spinal cord injury (SCI). The influence of the hip position and passive movement were tested in 6 subjects with chronic SCI. Each subject placed in a supine position and lower leg was fixed with the knee at 5 -45 degree flexion and the ankle at 25-40 degree plantar flexion. A train of 10 stimulus pulses were applied at 200 Hz to the skin of the medial arch to trigger flexion reflexes. From results of the regression analysis, static properties of normalized muscle activation of flexor muscles have the linear relationship with respect to hip angle (P< 0.05). In order to verify the neural contribution of flexion reflex, we compared the static and dynamic gains of estimated muscle activations with measured EMG of ankle flexor muscle. Form this study, we postulate that the torque and muscle response of flexion withdrawal reflex have linear relationship with hip angle and angular velocity.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.145-160
• /
• 2004

The purposes of this study to provide quantitative data in necessary to advance techniques kinematic analysis of Cucarachas which is an action of Rumba. Then, this study is performed on 5 female players who have won within the third prize at a national athletic meeting. When whole foot reached to floor, Displacement of right-left hip joint (until $E1{\sim}E3$ average moved 15.15cm)is found at right-left direction since the hip joint is turned to right back. On the other side, large displacement is shown because Rumba Cucaracha Movement is expressed by maximum shift of hip joint to right and left direction. Displacement of right hip joint(E3$57.40{\pm}7.46$) is found in front and in rear direction since hip joint is moved in rear and in front to turn the hip joint. It may be stated that this is ideal displacement expressed by movement of whole body with artistic poise and presentation because role of hip joint is very important in technical and artistic side. Angle of right shoulder joint E2($105.44{\pm}9.64$) is got wider. It may be stated that player shifts up and abduct elbow joint to right since center of gravity of player is exceedingly shifted to right in this motion of Cucarachas. On the other hand, since this motion is abducted right elbow and shrunk external abdominal oblique to him center of body to left front of hip joint, the angle becomes narrow. It is shown that angle of knee in right knee joint E4($75.44{\pm}2.61$) is large since right leg and hip joint is turned by foot using reaction of ground and so center of body is shifted to left. Large angle of ankle E4($134.40{\pm}10.50$) in Cucaracha Movement is shown by the action of twist force using narrow part of foot and compression force against ground with adduction speed of arm. The various kinematic analyses associated with motions of dance sport have not been sufficiently peformed so far, and thus a number of research projects for dance sport should be proposed and performed to be continuous.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.103-109
• /
• 2020

This study aims to investigate the improvement in basic CPR quality on the basis of the hip joint angle of the rescuer among students in the Department of Emergency Medical Technology who completed a basic CPR curriculum. In this study, we carried out a comparative analysis using SimPad SkillReporter and Resusci Anne® QCPR® to measure the quality of CPR (depth of chest compressions, full relaxation, compression speed, and more) on the basis of the rescuer's hip joint angle in accordance with the 2015 AHA Guidelines and conducted chest compressions and CPR 5 times in a 30:2 ratio. It was found that maintenance of the rescuer's hip joint angle at 90 degrees while compressing and relaxing the chest made a statistically significant difference in both the experimental and control groups. Moreover, this indicated that the closer the hip joint angle was to 90 degrees, the better was the quality of basic CPR. However, there was no significant difference in the hip joint angle, degree of CPR, depth of chest compressions, chest compression speed, chest compression and relaxation percentages (%), accuracy of chest compressions, hands-off time during CPR, and percentage of chest compression time (p > 0.05). Maintaining the hip joint angle at 90 degrees for basic CPR was not significantly different from not maintaining this angle. Nonetheless, good results have been obtained at moderate depth and 100% recoil. Therefore, good outcome and high-quality CPR are expected.

• The Research Journal of the Costume Culture
• /
• v.5 no.4
• /
• pp.112-129
• /
• 1997

This research, focused on the curved of the lower body, designated abdomen and hip gradient, crotch depth and crotch width the factors for which are able to influence on the appearence and the function of Divided Skirt and analized the changes when that were applied to a real pattern, and so the purpose of this research is to show the basic documents needed to design a Divided Skirt pattern fitting with the wear purpose and usage. The following are the results of this research. 1. The abdomen and hip gradient turned out as the most influential factor on the appearance and the function of Divided Skirt. The pattern of which the abdomen and hip gradient was designated as vertical zero degree, showed an excellent appearance and in case of function, the pattern of which thw angle of the abdomen and hip gradient of human body type was applied to itself without a particular designation turned out excellent. 2. In case of crotch depth, the pattern which had crotch depth＋2㎝, had a better appearance but influced nothing on function. 3. The factor of crotch width didn\`t have any influence on the appearance and function of Divided Skirt. 4. Referring to the results of the above, the Divided Skirt pattern of which the appearance and the function turned excellent, had the angle of abdomen gradient 4 degrees, the angle abdomen gradient 4 degrees, the angle of hip gradient/2+2.5 degrees, crotch depth+2㎝ and crotch width following human body type. In case of Divied Skirt worn when going out, the pattern which had the angle of abdomen and hip gradient vertical zero degree, crotch depth+2㎝ and crotch width following human body type, turned out suitable. Also, the suitable pattern of Divided Skirt for working had the abdomen and hip gradient following human body type, crotch depth+2㎝ and covering girth diameter/2±1㎝.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.293-300
• /
• 2015

Objective : The purpose of this study was to compare the kinematic data of the horizontal rotation movements of shoulder, hip, knee during two-handed backhand drive stroke according to two different ball directions. Methods : The kinematic variables were analyzed such as the joint angles of the lower body, horizontal rotation angles of the shoulder, hip, inter-knee segment, body twist angle and difference in angle of forward swing. Two-handed backhand drive stroke was analyzed through a three-dimensional motion analysis. The collected data were analyzed by a paired t-test, and the statistical significant value was set at ${\alpha}=.05$. Results : The findings of this study were as follows; First, there was no difference in the total angles of lower limb joints from the forward swing position to impact posterior. Second, there was no difference in the horizontal rotation angles of E1 shoulder, hip, and E2 shoulder but the horizontal rotation angles of E1 knee, E2 hip, knee, E3, and E4 shoulder, hip, and knee were different in all events. Third, there was no difference in the body twist angle of the maximum horizontal rotation. In addition, there was no difference in the angle of the body twist by the ball direction in the shoulder-hip, the hip-knee and the shoulder-knee. Conclusion : Horizontal rotation angle determines ball directions.