• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.47-55
• /
• 2012

This paper describes the developed HILS and test equipment in order to test the performances of MMW(Millimeter-Wave) seeker which can detect and track a high speed of short-range ballistic missile and aircraft. This system is used to 141 horn antenna array, array switching, and gain and phase control algorithm to simulate various kind of targets and trajectory of high speed and maneuver moving target. In addition, it simulates not only velocity and range for these targets but also clutter and jamming environments. System configuration and implementation and the measurement results of major subsystems such as target motion simulator, simulation signal generator, high speed data aquisition unit, and central control unit are presented. These systems could verify the detection and tracking performance of MMW seeker through dynamic real-time test based on simulation flight scenario.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.429-447
• /
• 2020

The considered simulation tasks are based on an electrometallurgical process development strategy and associated telemanipulator simulation systems are proposed with various scales of experimental facilities. Fundamentally, target facilities are assumed to be operated only by remote handling systems because the considered process is operated in hazardous environments. Futhermore, the feasibility at various scales should be experimentally verified with gradual increase in throughput. In this regard, bench, engineering, and pilot-scale simulation systems are important early-stage tools for assessing the practical operability of the target process with the material handling systems. Such simulation systems are highly customized for applications and are a precursor to larger pilot and demonstration-scale plants. This paper introduced and classified the developed simulator systems for this approach at various scales using remote handling systems which were assembled inside a virtual target facility, and the manmachine interface was included for a more realistic operation of the simulator. The results obtained for each simulator show the feasibility and requirement for improvement of the systems for the considered test issues with respect to the operation and maintenance of the process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.219-220
• /
• 2016

A power management system (PMS) has been an important part in a ship integrated control system. To evaluate a PMS for a liquefied natural gas carrier (LNGC), this research proposes a real-time hardware-in-the-loop simulation (HILS), which is composed of major component models such as turbine generator, diesel generator, governor, circuit breaker, and 3-phase loads on MATLAB/Simulink. In addition, FPGA based control console and main switchboard (MSBD) are constructed in order to develop an efficient control and a similar real environment in an LNGC PMS. A comparative study on the performance evaluation of PMS functions is conducted using two test cases for sharing electric power to consumers in an LNGC. The result shows that the proposed system has a high verification capability for the operating function and failure insertion evaluation as a PMS simulator.

• Annual Conference of KIPS
• /
• 2017.11a
• /
• pp.526-529
• /
• 2017

Deep Drive 플랫폼 개발 기술인 HILS(Hardware In the Loop Simulation)는 시스템 모델에 근간을 둔 실시간 시뮬레이션 기법과 H/W를 접목시킨 실시간 해석 기법으로, 플랫폼 개발으로 현재는 난해성이 있는 자율 주행 자동차 실차의 테스트 베드를 구현하여, 여러 가지 실험을 통해 실제 차의 운행에 대한 피드백을 제공, 운전자로부터 안전을 보장하기 위한 기술 보장, 기술의 상용화, 양산화 연구에 도움을 줄수 있음.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.211-217
• /
• 2007

The wheel slip control systems are able to control the braking force more accurately and can be adapted to different vehicles more easily than conventional ABS (Anti-lock Brake System) systems. In realizing the wheel slip control systems, real-time information such as the tire braking force at each wheel is required. In addition, the optimal target slip values need to be determined depending on the braking objectives such as minimum braking distance and stability enhancement. In this paper, a robust wheel slip controller is developed based on the adaptive sliding mode control method and an optimal target slip assignment algorithm is proposed for maximizing the braking force. An adaptive law is formulated to estimate the braking force in real-time. The wheel slip controller is designed based on the Lyapunov stability theory considering the error bounds in estimating the braking force and the brake disk-pad friction coefficient. The target slip assignment algorithm searches for the optimal target slip value based on the estimated braking force. The performance of the proposed wheel slip control system is verified in HILS (Hardware-In-the-Loop Simulator) experiments and demonstrates the effectiveness of the wheel slip control in various road conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.88-93
• /
• 2016

LCL filters are widely used in high-order harmonics attenuation of output currents in grid-connected inverters. However, output currents of grid-connected inverters with LCL filters can become unstable because of the resonance of the filters. Given that the characteristics of output currents in inverters mostly depend on filter performance, the exact analysis of filters by considering parasitic components is necessary for both harmonics attenuation and current control. LCL filters have three or four parasitic components: the series and/or parallel resistance of the filter capacitor and the series resistance of the two filter inductors. Most studies on LCL filters have focused on the parasitic components of the filter capacitor. Although several studies have addressed the parasitic components of the filter inductor at the inverter side, no study has yet investigated the concurrent effects of series resistance in both filter inductors in detail. This paper analyzes LCL filters by considering series resistance in both filter inductors; it proposes an active damping method based on the virtual series resistance of LCL filters. The performance of the proposed active damping is then verified through both simulation and experiment using Hardware-in-the-Loop Simulator(HILS).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.75-81
• /
• 2021

This study analyzes the resonance characteristics caused by the mutual interference between LCL filters and the grid impedance under the parallel operation of the grid-connected inverter using the LCL filter. These characteristics are verified through simulation and experiment. Two inverters are used to connect to the grid in parallel, and the system parameters, including the LCL filter, are set to the same conditions. In the case of inverters running in parallel at the point of common coupling, the presence of grid impedance causes mutual interference between the LCL filters of each inverter, and the deviation of the filter resonance frequency is analyzed to understand the parallel inverter. The correlation between the number of devices and the size of grid impedance is simulated by PSIM and verified by MATLAB. By connecting the real-time digital simulator Typhoon HILS to the DSP 28377 control board, the mutual interference characteristics are tested under the condition of two inverters running in parallel. The experimental and analysis results are the same, indicating the validity of the analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2228-2234
• /
• 2000

Steering of the vehicles on a slippery highway is a difficult task for most passenger car drivers. The steering vehicles on slippery roads tend to slide outward with less lateral forces than on nor mal roads. When the drivers notice that their vehicles on a slippery highway start to depart from the cornering lane, most of them make a sudden steering and/or braking, which in turn may induce spin-out and instability on their vehicles. In this paper, an active steering control method is proposed such that the vehicles in slippery roads are steered as if they are driven on the normal roads. In the proposed method, the estimated lateral forces acting on the steering tires are compared with the reference values and the difference is compensated by the active steering method. A fuzzy logic controller is designed for this purpose and evaluated on a steering Hardware-In-the-Loop Simulation (HILS) system. Steering performance results on the slippery curved and sinus roads demonstrate the effectiveness of the proposed controller. This method can be realized with the steer-by-wire concept and is promising as an active safety technology.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.451-456
• /
• 2018

UAComm (Underwater Acoustic Communication) is an active research area, and many experiment has been performed to develop UAComm system. In this paper, we investigate the possibility of modifying and applying VirTEX (Virtual Time series EXperiment) to medium long range MIMO (Multiple-Input Multiple-Output) UAComm of about 20 km range for the analysis and performance prediction of UAComm system. Since VirTEX is a time-domain simulator, the generated time series can be used in HILS (Hardware In the Loop Simulation) to develop UAComm system. The developed package is verified through comparing with the sea-going FAF05 (Focused Acoustic Field 2005) experimental data. The developed simulator can be used to predict the performance of UAComm system, and even replace the expensive sea-going experiment.