• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1003-1008
• /
• 2017

In this paper, we studied the design and fabrication of double T Structure with CPW antenna at around 5 GHz band.. To improve of frequency properties of antenna, Double T Structure with CPW antenna was simulated by HFSS(: High Frequency Structure Simulator). A double T Structure with CPW antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated A double T Structure with CPW antenna showed a center frequency, the minimum return loss and impedance were 5.29GHz, -34dB, and 390MHz, $49.6{\Omega}$ respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5827-5831
• /
• 2011

In this paper, 5Ghz microstrip patch antenna for wireless LAN is designed, fabricated, and measured. To obtain wide bandwidth and high gain, antenna parameters such as patch size(W, L), the length of the slot(C), and the slot width(D) are simulated by HFSS(High Frequency Structure Simulator). From these parameters optimized, the microstrip patch antenna is fabricated using FR-4 substrate. The measured results of the antenna are as follows: The center frequency of 5.2 GHz, insertion loss of -41.17dB, bandwidth of 258MHz, and VWSR of 1.1.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.53-59
• /
• 2010

There are various types of antenna fed method; coaxial probe, coupling, parasitic elements, and impedance matching. In this paper, the fed method of the proposed antenna is microstrip line type. The high frequency structure simulator (HFSS) is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.578-581
• /
• 2004

유전체가 삽입된 공동 공진기는 유전체에 대부분의 전자계가 집속되어 있기 때문에, 도체 손실이 매우 적고 높은 Q값과 온도 안정성이 뛰어나다. 동일한 주파수에서 동작하는 다른 필터에 비해 상대적으로 작기 때문에 소형화에도 적합하다. 본 논문에서는 유전체가 삽입된 공동 공진기의 전자기 분포와 특성을 수치해석과 HFSS(High Frequency Structure Simulator)를 이용하여 분석하였고 이 결과를 토대로 HFSS를 이용한 순차적 방법을 도입하여 4-pole 이중모드 대역통과 필터를 설계, 제작하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.779-783
• /
• 2012

In this paper, we studied the design and fabrication of $2{\times}2$ array-type microstrip patch antenna to be used in wireless communication systems operating at around 5GHz band. To obtain wide bandwidth and high gain, antenna parameters such as patch size, inter patch space are simulated by HFSS(High Frequency Structure Simulator). From these parameters, the $2{\times}2$ array-type microstrip patch antenna is fabricated using FR-4 substrate. The measured results of the antenna are as follows: The center frequency of 5.06GHz, insertion loss of -44dB, bandwidth of 200MHz, and VWSR of 1.1.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.2
• /
• pp.119-128
• /
• 2001

The oscillation frequency tuning range of waveguide Gunn oscillator and its stability depend sensitively on the dimensions of the resonator. Therefore the embedding impedances with the various dimensions of the resonator for Q-band (33 ∼ 50 GHz) Gunn oscillator are calculated by using HFSS (High Frequency Structure Simulator). In this paper the comparisons between theoretical results of embedding impedances as a function of frequency and that of experimental results are described. And the oscillation frequency range could be predicted by using the theoretical evaluation methods which were proposed in this paper It shows that post size has an effect on the frequency tuning characteristics of Gunn oscillator.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.7-12
• /
• 2015

In this paper, we studied the design and fabrication of dual T type antenna to be used in LTE communication systems operating at around 1.8 GHz band. In order to improve of frequency properties of antenna, single feed microstrip patch antenna and CPWG antenna was simulated by HFSS(High Frequency Structure Simulator). The fabricated dual T type antennat showed that the measured center frequency, the minimum return loss and -10dB bandwidth were 1.79 GHz, -23.26 dB and 23 MHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.430-439
• /
• 1996

In printed circuit board (PCB) design, it is necessary to predict the crosstalk effect among traces on the circuitary behavior. In this paper, crosstalk between parallel or crossing traces was treated by the finite difference time domain (FDTD) method. They are the typical models of PCB traces and the crosstalk is a major contributor in the creation of electromagnetic interference (EMI). The crosstalk effect was computed for the variation of distance spacing and length of parallel traces and crossing traces. The results in time and frequency domain are discussed and compared with those using MDS(microwave design system) and HFSS(high frequency structure simulator). The comparison shows that the FDTD method can be of wide application in analysis model and save the time required for calculation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.549-554
• /
• 2017

In this paper, we studied the design and fabrication of $2{\times}2$ microstrip array antenna at around 5 GHz band.. To improve of frequency properties of antenna, feed microstrip patch antenna was simulated by HFSS(High Frequency Structure Simulator). A $2{\times}2$ array antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated $2{\times}2$ array antenna showed a center frequency, the minimum return loss and bandwidth were 5.3 GHz, -24dB, and 390MHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.912-918
• /
• 2003

In this paper, we designed and implemented the dual band monopole antenna for cellular CDMA(Code Division Multiple Access) and IMT-2000(International Mobile Telecommunication 2000) repeater. The antenna was designed by using 3D simulations program, HFSS(High Frequency Structure Simulator). Electrical characteristics were measured by using HP 8720C network analyzer and measured maximum S$\_$11/ was -10.9 dB for all frequency bands of interests in Cellular CDMA and IMT-2000. Simulation results for antenna gain at 859 MHz and 2027.5 MHz were 2.38 dBi and 4.02 dBi respectively with omni directional radiation pattern. The size of implemented antenna is compact and the antenna can be produced in low cost enough for commercialization.