• 제목/요약/키워드: HFP

검색결과 124건 처리시간 0.025초

폐의 원발성 평활근육종 (Primary Leiomyosarcoma of The Lung -One case report-)

  • 김형수;지현근;이원용;김응중;홍기우;남은숙
    • Journal of Chest Surgery
    • /
    • 제31권9호
    • /
    • pp.907-910
    • /
    • 1998
  • 원발성으로 폐에 발생하는 평활근육종(leiomyosarcoma)은 매우 드물다. 한림대학교 강동성심병원 흉부외과학 교실에서는 46세 남자환자의 좌측 폐상엽기관지에서 발생한 종 양을 흉부전산화 단층촬영에서 발견하였다. 객담검사및 기관지내시경하 조직생검에서 종양세포는 발견되 지 못하였다. 환자는 좌측 수상 폐상엽 절제술을 통해 폐실질에 부분적으로 침범된 기관지내에 발생한 종양을 제거 하였다. 술후 현미경하 조직소견을 관찰한 결과 종양세포는 이형성 방추형세포로 15/10HFP의 유사분열을 하고 있었고 긴다발로 배열되어 있었으며, 면역조직화학적 염색상 smooth muscle actin과 desmin에 양성으 로 염색되었다. 종양은 폐에서 원발성으로 발생한 평활근육종으로 진단되었고, 문헌고찰과 함께 보고하는바이다.

  • PDF

Evaluation of the reutilization of used nuclear fuel in a PWR core without reprocessing

  • Zafar, Zafar Iqbal;Park, Yun Seo;Kim, Myung Hyun
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.345-355
    • /
    • 2019
  • Use of the reconstructed fuel assemblies from partially burnt nuclear fuel pins is analyzed. This reutilization option is a potential candidate technique to make better use of the nuclear resources. Standard two step method is used to calculate node i.e. fuel assembly average burnup and then pin by pin ${\eta}$ values are reconstructed to ascertain the residual reactivity in the used fuel pins. Fuel pins with ${\eta}$ > 1:0 are used to reconstruct to-be-reused fuel assemblies. These reconstructed fuel assemblies are burnt during the cycle 3, 4, 5 and 6 of a 1000 MW PWR core by replacing fresh, once burnt and twice burnt fuel assemblies of the reference core configurations. It is concluded that using reconstructed fuel assemblies for the fresh fuel affect dearly on the cycle length (>50 EFPD) when more than 16 fresh fuel assemblies are replaced. However, this loss is less than 20 days if the number of fresh fuel assemblies is less than eight. For the case of replacing twice burned fuel, cycle length could be increased slightly (10 days or so) provided burnt fuel pins from other reactors were also available. Reactor safety parameters, like axial off set (< ${\pm}10%$), Doppler temperature coefficient (<0), moderator temperature coefficient at HFP (<0) are always satisfied. Though, 2D and 3D pin peaking factors are satisfied (<1:55) and (<2:52) respectively, for the cases using eight or less reconstructed fuel assemblies only.

A Systems Engineering Approach to Multi-Physics Analysis of CEA Ejection Accident

  • Sebastian Grzegorz Dzien;Aya Diab
    • 시스템엔지니어링학술지
    • /
    • 제19권2호
    • /
    • pp.46-58
    • /
    • 2023
  • Deterministic safety analysis is a crucial part of safety assessment, particularly when it comes to demonstrating the safety of nuclear power plant designs. The traditional approach to deterministic safety analysis models is to model the nuclear core using point kinetics. However, this simplified approach does not fully reflect the real core behavior with proper moderator and fuel reactivity feedbacks during the transient. The use of Multi-Physics approach allows more precise simulation reflecting the inherent three-dimensionality (3D) of the problem by representing the detailed 3D core, with instantaneous updates of feedback mechanisms due to changes of important reactivity parameters like fuel temperature coefficient (FTC) and moderator temperature coefficient (MTC). This paper addresses a CEA ejection accident at hot full power (HFP), in which the underlying strong and un-symmetric feedback between thermal-hydraulics and reactor kinetics exist. For this purpose, a multi-physics analysis tool has been selected with the nodal kinetics code, 3DKIN, implicitly coupled to the thermal-hydraulic code, RELAP5, for real-time communication and data exchange. This coupled approach enables high fidelity three-dimensional simulation and is therefore especially relevant to reactivity initiated accident (RIA) scenarios and power distribution anomalies with strong feedback mechanisms and/or un-symmetrical characteristics as in the CEA ejection accident. The Systems Engineering approach is employed to provide guidance in developing the work in a systematic and efficient fashion.

도토리의 일반성분 분석 및 도토리 추출물과 고지방 식이의 병행섭취 시 흰쥐 체내에서 혈중 지질인자와 사이토카인에 미치는 영향 (Analysis of the General Components of Acorns and Effects of Acorn Extracts and High-Fat Diet Supplements on the Blood Lipid Factor and Cytokine Levels in Mice)

  • 제해종;정태환;신경옥
    • 한국식품영양학회지
    • /
    • 제30권1호
    • /
    • pp.148-155
    • /
    • 2017
  • This study aimed to investigate the effect of acorn powder and starch on the blood parameters of mice fed a high-fat diet. The moisture, crude ash, crude protein, and crude fat contents of acorns were $37.99{\pm}0.37%$, $1.61{\pm}0.06%$, $4.36{\pm}0.18%$ and $3.22{\pm}0.15%$, respectively. Acorn powder and starch contains antioxidant minerals such as selenium and zinc. The iron content was significantly higher in acorn powder than in acorn starch (p<0.05). The total cholesterol concentration was $148.50{\pm}29.72mg/dL$ in the high-fat starch diet (HFS) group, while in the high-fat diet (HF) group it was $201.50{\pm}39.15mg/dL$ (p<0.05). Serum LDL-cholesterol concentrations were significantly lower in the HFS group ($50.50{\pm}10.79mg/dL$) than in the HF group ($62.00{\pm}20.85mg/dL$; p<0.05). The serum $IL-1{\beta}$ levels in mice were not significantly different between the groups. IL-10 levels were higher in the HFP group than other groups. There is a need for strong recognition that acorns are good ingredients worldwide. It is required to develop various products using acorn powder and starch powder. There is also a need for a strategy to globalize food using acorns.

톳(Hizikia fusiformis), 무화과(Ficus carica) 및 배(Pyrus pyrifolia)의 혼합 추출물을 이용한 생선커틀릿용 튀김옷의 기능성 (Functional Evaluation of Fish Cutlet Batter Made from the Extracts of Hiziki Hizikia fusiformis Fig Fruit Ficus carica and Pear Pyrus pyrifolia)

  • 김민용;김종덕;김보영;신영우
    • 한국수산과학회지
    • /
    • 제50권6호
    • /
    • pp.721-730
    • /
    • 2017
  • This study determined the optimal mixing ratio of functional materials to enhance the functionality of batter for fish cutlets. An optimal mixing ratio of the hiziki Hizikia fusiformis, fig fruit Ficus carica L. and pear Pyrus pyrifolia Niitaka extracts (HFP extract) of 3:1:1 was found. The physicochemical properties of the mixture were as follows: total phelonic contents of $1187.29{\pm}41.55mg/L$, 1,1-diphenyl-2-picryhydrazyl (DPPH) radical scavenging activity of $61.50{\pm}2.33%$, ascorbic acid content of $23.68{\pm}0.02g/100g$, ${\beta}-carotene$ content of $51{\pm}3.92{\mu}g/100g$, and sugar content of $12.7{\pm}0.1Brix^{\circ}$. A mixture of the extract, Korean herbal powder, and wheat flour was prepared as the fish cutlet batter. The fish cutlet prepared with the batter had a hardness of $166-202g/cm^2$ and Hunter's color scale values L of $31.14{\pm}2.1$ to $34.62{\pm}1.3$, a of $-4.89{\pm}0.21$ to $-2.26{\pm}0.19$ and b of $-20.65{\pm}2.65$ to $28.93{\pm}3.14$. The FRAP (ferric reducing antioxidant power) and VBN (volatile basic nitrogen) of the fish cutlets were measured to evaluate functionality and determine the optimal mixing ratio for cold storage at $-12^{\circ}C$, $-18^{\circ}C$, and $-24^{\circ}C$. The optimum mixture ratio of extracts /Korean herbal powder/ wheat flour was 1:6:3.

탄소나노섬유복합체를 이용한 의류용 직물발열체의 제조 및 특성 (Preparation and Characterization of Carbon Nanofiber Composite Coated Fabric-Heating Elements)

  • 강현숙;이선희
    • 한국의류학회지
    • /
    • 제39권2호
    • /
    • pp.247-256
    • /
    • 2015
  • This study prepared fabric-heating elements of carbon nanofiber composite to characterize morphologies and electrical properties. Carbon nanofiber composite was prepared with 15wt% PVDF-HFP/acetone solution, and 0, 1, 2, 4, 8, and 16wt% carbon nanofiber. Dispersion of solution was conducted with stirring for a week, sonification for 24 hours, and storage for a month, until coating. Carbon nanofiber composite coated fabrics were prepared by knife-edge coating on nylon fabrics with a thickness of 0.1mm. The morphologies of carbon nanofiber composite coated fabrics were measured by FE-SEM. Surface resistance was determined by KS K0555 and worksurface tester. A heating-pad clamping device connected to a variable AC/DC power supply was used for the electric heating characteristics of the samples and multi-layer fabrics. An infrared camera applied voltages to samples while maintaining a certain distance from fabric surfaces. The results of morphologies indicated that the CNF content increased specifically to the visibility and presence of carbon nanofiber. The surface resistance test results revealed that an increased CNF content improved the performance of coated fabrics. The results of electric heating properties, surface temperatures and current of 16wt% carbon nanofiber composite coated fabrics were $80^{\circ}C$ and 0.35A in the application of a 20V current. Carbon nanofiber composite coated fabrics have excellent electrical characteristics as fabric-heating elements.

Mutual Authentication and Secure Session Termination Scheme in iATA Protocol

  • Ong, Ivy;Lee, Shirly;Lee, Hoon-Jae;Lim, Hyo-Taek
    • Journal of information and communication convergence engineering
    • /
    • 제8권4호
    • /
    • pp.437-442
    • /
    • 2010
  • Ubiquitous mobile computing is becoming easier and more attractive in this ambient technological Internet world. However, some portable devices such as Personal Digital Assistant (PDAs) and smart phones are still encountering inherent constraints of limited storages and computing resources. To alleviate this problem, we develop a cost-effective protocol, iATA to transfer ATA commands and data over TCP/IP network between mobile appliances and stationary servers. It provides mobile users a virtual storage platform which is physically resided at remote home or office. As communications are made through insecure Internet connections, security risks of adopting this service become a concern. There are many reported cases in the history where attackers masquerade as legitimate users, illegally access to network-based applications or systems by breaking through the poor authentication gates. In this paper, we propose a mutual authentication and secure session termination scheme as the first and last defense steps to combat identity thief and fraud threat in particular for iATA services. Random validation factors, large prime numbers, current timestamps, one-way hash functions and one-time session key are deployed accordingly in the scheme. Moreover, we employ the concept of hard factorization problem (HFP) in the termination phase to against fraud termination requests. Theoretical security analysis discussed in later section indicates the scheme supports mutual authentication and is robust against several attacks such as verifiers' impersonation, replay attack, denial-of-services (DoS) attack and so on.

High Molecular Weight Poly-Gamma-Glutamic Acid Regulates Lipid Metabolism in Rats Fed a High-Fat Diet and Humans

  • Park, Ji-Ho;Choi, Jae-Chul;Sung, Moon-Hee;Kang, Jae-Heon;Chang, Moon-Jeong
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권7호
    • /
    • pp.766-775
    • /
    • 2011
  • We investigated the effect of high molecular weight polygamma- glutamic acid (hm ${\gamma}$-PGA) on adiposity and lipid metabolism of rats in the presence of an obesity-inducing diet. Thirty-two Sprague-Dawley rats were fed either a normal-fat (11.4% kcal fat, NFC) or high-fat (51% kcal fat, HFC) diet. After 5 weeks, half of each diet-fed group was treated with hm ${\gamma}$-PGA (NFP or HFP) for 4 weeks. The HFC group had significantly higher body weight, visceral fat mass, fasting serum levels of total cholesterol, LDL cholesterol, and leptin, and lower serum HDL cholesterol level compared with those of the NFC group (p < 0.05). Treatment with hm ${\gamma}$-PGA decreased body weight gain and perirenal fat mass (p<0.05), fasting serum total cholesterol, and mRNA expression of glucose-6- phosphate dehydrogenase (G6PD), regardless of dietary fat contents (p < 0.01). However, hm ${\gamma}$-PGA increased serum HDL cholesterol in the HFC group (p < 0.05). In vitro, 3-hydroxy-3-methylglutaryl coenzyme-A (HMGCoA) reductase activity was suppressed by the addition of hm ${\gamma}$-PGA. In agreement with observations in animal study, the supplementation of hm ${\gamma}$-PGA (150 mg/day) to 20 female subjects in an 8-week double-blind, placebocontrolled study resulted in a tendency to decrease total cholesterol and LDL cholesterol concentrations. We thus conclude that dietary supplementation of hm ${\gamma}$-PGA may act as a hypocholestrolemic agent, secondary to its inhibitor effect on HMG-CoA reductase, and decrease abdominal adiposity by decreasing hepatic lipogenesis. The present study is an important first step in establishing the effect of hm ${\gamma}$-PGA on cholesterol levels in rats and humans.

유리섬유 cloth가 보강된 겔상의 고분자 필름을 전해질로 이용한 리튬이온 전지의 특성 (Characteristics of Li-ion battery using polymeric gel electrolytes reinforced with glass fiber cloth)

  • 박호철;김상헌;전종한;고장면;조수익;손헌준
    • 전기화학회지
    • /
    • 제3권2호
    • /
    • pp.100-103
    • /
    • 2000
  • 유리섬유(glass fiber cloth, GFC)가 보강된 겔상의 고분자 필름을 전해질로 이용하여 박형 리튬이온 전지를 제조하여 충방전 특성을 조사하였다. 고분자 전해질은 polyacrylronitrile(PAN), poly(vinylidenefluoride-co-hexafluoropropylene)(PVdF), ethylene carbonate(EC), propylene carbonate(PC), diethyl carbonate(DEC), Licla을 혼합하여 제조한 점성 유체를 $38{\mu}m$두께의 GFC에 함침시켜 고분자 겔 상의 필름을 제조하였다. 전지는 $LiCoO_2$와 mesophase pich-based carbon fiber(MCF)를 양극과 음극으로 각각 사용하여 제조하였다. 충방전시험은 0.2C에서 양극질량 기준으로 110mAh/g의 용량을 나타내었으며, 2.9-4.1V영역에서 400 cycle까지 초기용량의 $80\%$이상을 유지하였다. 이러한 결과는 GFC가 기계적 강도가 빈약한 고분자겔의 보강제로서 기계적 물성을 향상시킬 뿐 아니라 고분자 겔의 점탄성에 기인한 creep현상을 억제하여 고분자 겔 필름의 치수를 일정하게 유지시켜주어 전해질의 저항변화를 최소화시키고 전극간의 단락을 효과적으로 방지하는 것으로 추론할 수 있다.

항만의 경쟁상황을 고려한 동적모형 개발에 관한 연구 (A Study on the Development of Dynamic Models under Inter Port Competition)

  • 여기태;이철영
    • 한국항해학회지
    • /
    • 제23권1호
    • /
    • pp.75-84
    • /
    • 1999
  • Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, therefore, a new algorithm called ESD (Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia. The detailed objectives of this paper are to develop Unit fort Model by using SD(System Dynamics) method; to develop Competitive Port Model by ESD method; to perform sensitivity analysis by altering parameters, and to propose port development strategies. For these the algorithm for the evaluation of part's competition was developed in two steps. Firstly, SD method was adopted to develop the Unit Port models, and secondly HFP(Hierarchical Fuzzy Process) method was introduced to expand previous SD method. The proposed models were then developed and applied to the five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung - with real data on each ports, and several findings were derived. Firstly, the extraction of factors for Unit Port was accomplished by consultation of experts such as research worker, professor, research fellows related to harbor, and expert group, and finally, five factor groups - location, facility, service, cargo volumes, and port charge - were obtained. Secondly, system's structure consisting of feedback loop was found easily by location of representative and detailed factors on keyword network of STGB map. Using these keyword network, feedback loop was found. Thirdly, for the target year of 2003, the simulation for Pusan port revealed that liner's number would be increased from 829 ships to 1,450 ships and container cargo volumes increased from 4.56 million TEU to 7.74 million TEU. It also revealed that because of increased liners and container cargo volumes, length of berth should be expanded from 2,162m to 4,729m. This berth expansion was resulted in the decrease of congested ship's number from 97 to 11. It was also found that port's charge had a fluctuation. Results of simulation for Kobe, Yokohama, Kaoshiung, Keelung in northeast asia were also acquired. Finally, the inter port competition models developed by ESB method were used to simulate container cargo volumes for Pusan port. The results revealed that under competitive situation container cargo volume was smaller than non-competitive situation, which means Pusan port is lack of competitive power to other ports. Developed models in this study were then applied to estimate change of container cargo volumes in competitive relation by altering several parameters. And, the results were found to be very helpful for port mangers who are in charge of planning of port development.

  • PDF