• Composites Research
• /
• v.28 no.6
• /
• pp.366-371
• /
• 2015

In order to improve the mechanical properties of tungsten at room and elevated temperature, hafnium carbide (HfC) reinforced tungsten matrix composites were prepared using the spark plasma sintering technique. The effect of HfC content on the compressive strength and flexural strength of the tungsten composites was investigated. Mechanical properties of the composites were also measured at elevated temperatures and their trends, with varying reinforcement volume fraction, were studied. The effect of reinforcement fraction on the thermal properties of the composites was investigated. The thermal conductivity and diffusivity of the composites decreased with increasing temperature and reinforcement volume fraction. An inherently low thermal conductivity of the reinforcement as well as interfacial losses was responsible for lower values of thermal conductivity of the composites. Values of coefficient of thermal expansion of the composites were observed to increase with HfC volume fraction.

• Journal of Oriental Neuropsychiatry
• /
• v.21 no.2
• /
• pp.87-101
• /
• 2010

Objectives : The aim of this experiment was to investigate the influences of Autonomic Nervous System and EEG by conducting Reinforcement-Reduction(補瀉) acupuncture stimulation to compare the changes in acupoints on the body before and after treatment of acupuncture at Xingjian(LR2) being referred as Fire-point(火穴) and Ququan(LR8) being referred as Water-point(水穴) of Yin Liver Meridian(足厥陰肝經). Methods : This study was carried out on 30 healthy female volunteers in their 20's. There were four tests conducted throughout and the period for each test was between 2 to 5days. HRV and EEG were measured for 5 minutes before acupuncture stimulation was conducted on LR2-Reinforcement, LR2-Reduction, LR8-Reinforcement and LR8-Reduction at random. During the 20 minutes of acupuncture treatment, same subjects were measured simultaneously to observe any significant changes in acupoints. Again, the same subjects were measured for 5 minutes after removing the acupuncture in order to perform a comparative analysis. Results : The measurement of HRV showed that LF, LFnorm and LF/HF ratio increased significantly(p<0.05) while HF, HF norm decreased significantly in case of LR2-Reinforcement & LR8-Reduction. Both LR2-Reduction and LR8-Reinforcement induced a significant increase in HFnorm. EEG measurement indicated low $\alpha$ wave decreased and high $\beta$ wave increased significantly at LR2-Reinforcement during post-acupuncture period compared with acupuncture stimulation period. Both LR2-Reduction and LR8-Reinforcement developed significantly low $\alpha$ wave and high $\alpha$ wave. High $\beta$ wave increased significantly at LR8-Reduction during the acupuncture stimulation in comparison with pre-acupuncture period. Conclusions : The manipulation of acupuncture stimulation at LR2-Reinforcement and LR8-Reduction enhanced the activity of sympathetic nerves and the state of arousal while that of para sympathetic nerves declined. On the other hand, LR2-Reduction and LR8-Reinforcement developed the levels of para sympathetic nerves and relaxation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.56-66
• /
• 2017

In this study, seismic strengthening performance of RC circular columns reinforced with high ductile PET and hybridized fibers(HF, PET + aramid) strand was experimentally compared and investigated. As a result, the maximum flexural strength and ductility capacity of all reinforced columns were improved than control column and fiber rupture did not occur at the ultimate stage. In addition, the resistive strength and displacement of the PET sheet 25 layers reinforcing column and the HF strand 1 layer reinforcing column were almost similar, so that 1 layer of HF strand showed the same lateral confinement effect as the PET sheet 25 layers. As a result of this experimental study, PET is considered to be suitable as seismic reinforcement material for RC structures in terms of flexural strength and ductility. However, in order to increase the possibility of application in the field, it is necessary to use a prefabricated PET sheet such as HF used in this study. The durability of PET needs investigation in the future.

• Journal of Acupuncture Research
• /
• v.23 no.1
• /
• pp.25-38
• /
• 2006

Objectives : Acupuncture has been widely used in oriental medicine. The aim of this research is to study how does the interaction between reinforcement-reduction by twirling nine and six and subject's cold or heat tendency effect on Heart Rate Variability. Methods : We divided our subjects into 3 groups at random and classified subjects by their cold or heat tendency using questionnaire for cold-heat patternization. Group 1 is acupuncture at shinmun(HT7) reinforcement group, 2 is acupuncture at shinmun(HT7) reduction group, 3 in acupuncture at hapkok(LI4) group. According to their group, we acupunctured. Before and after acupuncture Heart Rate Variability raw data were measured during 5 minutes. LF, HF, LF norm HF norm were calculated. We analyzed these data using 3-way repeated ANOVA, Paired student T-Test. Results : 3-way repeated ANOVA showed significant interaction among LF, each group and subject's cold heat tendency(p<0.05). Paired student T-Test showed significant differences between before and after acupuncture at shinmun(HT7) reinforcement method in cold tendency men and acupuncture at shinmun(HT7) reduction method in heat tendency men(p<0.05). Conclusion : These results suggest that acupuncture at Shinmun(HT7) has an effect on declining sympathetic nerve function and has an effect on stabilizing mind through Interaction between reinforcement-reduction by twirling nine and six and subject's cold or heat tendency. We propose that more prudent care is needed about subject's cold or heat tendency and acupuncture technique of reinforcement-reduction to achieve the most suitable treatment effect.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.271-274
• /
• 2014

Bayesian based Multi-Frame Super-Resolution (MF-SR) has been used as a popular and effective SR model. On the other hand, the texture region is not reconstructed sufficiently because it works on the spatial domain. In this study, the MF-SR method was extended to operate on the frequency domain to improve HF information as much as possible. For this, a spatially weighted bilateral total variation model was proposed as a regularization term for a Bayesian estimation. The experimental results showed that the proposed method can recover the texture region more realistically with reduced noise, compared to conventional methods.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.57-64
• /
• 2006

The crack presented in concrete structures causes a structural defect, the durability decrease, and external damages etc. Therefore, it is necessary to improve durability through the effort to control the crack. Fluosilicic acid($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicates prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.0{\sim}2.0%$ of adding ratio of fluosilicate salt based inorganic compound. To evaluate correlation of concrete strength and adding ratio of fluosilicate salt based inorganic compound, the tests were performed about design strength(21, 24, 27 MPa) with 0.5% of adding ratio of fluosilicate salt based inorganic compound. Applications of fluosilicate salt based inorganic compound to reduce cracks resulted from plastic and drying shrinkage, to improve durability are presented in this paper. Durability was evaluated as neutralization, chloride ion penetration depth, freezing thawing resistant tests and weight loss according reinforcement corrosion. It is ascertained that the concrete added fluosilicate salt based inorganic compound showed m ability to reduce the total area and maximum crack width significantly as compared non-added concrete. In addition, the durability of concrete improved because of resistance to crack and watertightness by packing role of fluosilicate salt based inorganic compound obtained and pozzolanic reaction of soluble $SiO_2$ than non-added concrete.