• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.217-227
• /
• 2008

The electric power subsystems (EPS) of most remote sensing satellites consist of a solar array as a source of energy, a storage battery, a power management and control (PMC) unit and a charge equalization unit (CEU) for the storage battery. The PMC and CEU use high frequency transformers in their power modules. This paper presents a design, implementation and testing results of a high frequency transformer for the EPS of satellite applications. Two approaches are used in the design process of the transformer based on the pre-determined transformer specifications. The transformer is designed based on an ETD 29 ferrite core. The implemented transformer consists of one center-tapped primary coil with eleven center-tapped secondary coils. The offline calculation results and measured values of R, L for transformer coils are convergence. A test circuit for measuring the transformer parameters like voltage, current and B-H hysteresis was implemented and applied. The test results confirm that the voltage waveforms of both primary and secondary coils were as desired. No overlapping occurred between the control signal and the transformer, which was not saturated during testing even during a short circuit test of the secondary channels. The dynamic B-H loop characteristics of the used transformer cores were measured. The sample test results are given in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1825-1831
• /
• 2011

One of the major trends in traction power electronics is increasing the switching frequencies. The advances in the frequency elevation have made it possible to reduce the total size and weight of the passive components such as capacitors, inductors and transformers in the DC/DC converter and hence to increase the power density. The traction dynamic performance is also improved. This document describes several aspects relating to the design of resonant DC/DC converter operating at high frequency(10KHz) and the converter topologies and the control method of MAGLEV, which result in soft switching, are discussed.

• 한국자기학회지
• /
• 제16권4호
• /
• pp.197-200
• /
• 2006

RF magnetron reactive sputtering법으로 CoFeHfO 박막을 상온에서 제작하여 산소분압에 따른 포화자화, 보자력, 이방성자계를 조사하였다. 최적조건인 산소분압 8%에서 제조한 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ 박막은 포자자속밀도($4{\pi}M_s$) 19kG, 보자력($H_c$) 0.37Oe, 이방성자계($H_k$) 48.62Oe의 우수한 연자성을 나타내었다. CoFeHfO 박막의 전기비저항은 산소분압이 늘어남에 따라 증가하는 경향을 나타내었으며 우수한 연자기적 성질을 가지는 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ 박막의 경우, 300 ${\mu}{\Omega}cm$의 높은 전기비저항과 48.62 Oe의 높은 이방성자계 때문에 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$박막이 고주파에서 우수한 연자기 특성을 가지는 것으로 사료된다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.384-394
• /
• 1999

This paper deals with a fixed frequency full-bridge inverter type DC-DC high-power converter with high frequency high voltage(HFHV) transformer-coupled stage, which operates under quasi-resonant ZVS transition priciple in spite of a wide PWM-based voltage regulation processing and largely-changed load conditions. This multi-resonant(MR) converter topology is composed of a series capacitor-connected parallel resonant tank which makes the most of parasitic circuit reactive components of HFHV transformer and two additional quasi-resonant pole circuits incorporated into the bridge legs. The soft-switching operation and practical efficacy of this new converter circuit using the latest IGBTs are actually ascertained through 50kV trially-produced converter system operating using 20kHz/30kHz high voltage(HV) transformers which is applied for driving the diagnostic HV X-ray tube load in medical equipments. It is proved from a practical point of view that the switching losses of IGBTs and their electrical dynamic stresses relating to EMI noise can be considerably reduced under a high frequency(HF) switching-based phase-shift PWM control process for a load setting requirements.