• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.441-452
• /
• 1998

The c-fos is known as neuronal marker of second neurons which is activated by noxious peripheral stimulation. To investigate the changes of c-fos el(pression in the trigeminal nucleus complex during tooth movement, immunohistochemical study was performed. Experimental rats(9 weeks old, 210 gm 21 rats) were divided into seven groups(normal, 1 hour group, 3 hour group, 6 hour group, 12 hour group, 1 day group,3 day group). Rats in the normal group were anesthesized without orthodontic force. Rats in the experimental groups were applied orthodontic force (approximately 30 gm) to upper right maxillary molar. Frozen sections of brain stem were immunostained using rabbit antisera. The changes of c-fos expression were observed with respect to rostrocaudal distribution, laminar organization, md duration of orthodontic force application. The study results were as follows $\cdot$The c-fos nuclei in the dorsal part were observed from ipsilateral transition zone of subnucleus interpolaris and subnucleus caudalis to $C_1$ cervical dorsal horn rostrocaudally. The maximal peak point was the rostral part of subnucleus caudalis. The greatest proportion of c-fos cells were located within lamina I and II. $\cdot$The c-fos nuclei in the dorsal Part were observed from the most caudal part of subnucleus interpolaris to the middle part of the subnucleus caudalis. $\cdot$The number of c-fos immunoreactive dot increased at 1 hour group, reached its maximum at the 3 and 6 hour groups, and showed a decreasing trend after 12 hours. These results imply that nociceptive stimulation caused by continuous orthodontic force might be modulated by transition zone of subnucleus interpolaris and subnucleus caudalis, subnucleus caudalis, $C_1$ spinal dorsal hem.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of Embryo Transfer
• /
• v.18 no.2
• /
• pp.97-108
• /
• 2003

In-vitro fertilized Hanwoo embryos were biopsied for sex determination by PCR. Biopsied embryos were incubated for 1∼2 hours for the recovery. Those sexed Hanwoo embryos were transferred to 49 Hanwoo and 16 Holstein recipients from February 2000 to February 2001. Of 65 recipients, 14 cows(12 Hanwoo and 2 Holstein) delivered the same offspring as sex-determined by PCR, therefore the conception rate was 21.5%. 1. Total 65 embryos(male 35, female 30) were transferred to recipients, and 14 calves (male 6, female 8) were delivered. In comparison between sex by PCR method and sex of calves born after embryo transfer, the accuracy of sex determination was 100.0%. 2. The conception rate after transfer with biopsied embryo between Hanwoo and Holstein was 24.5% and 12.5% 3. The conception rate after transfer with biopsied embryo between fresh and frozen-thawed embryos was 23.5% and 14.3%. 4. The conception rate according to the season when embryo was transferred was 11.8, 29.4, 23.5 and 20.0% for spring, summer, autumn and winter, respectively. 5. The conception rate according to embryo quality after biopsy was 41.7, 30.0 and 0.0% for excellent, good and fair quality. 6. The conception rate according to thickness of uterine horn was 71.4, 18.9, 11.8 and 0.0% for 0, +, ++ and +++ thickness. 7. The conception rate according to the site in the uterine hem where embryo was put was 30.0, 20.0 and 10.0% for cranial, mid, and caudal part of uterine horn. 8. The conception rate according to the quality of corpus luteum ipsilateral to the uterine horn where embryos was transferred was 41.2, 14.3 and 15.4% for excellent, good and fair quality. 9. The conception rate according to the time required for embryo transfer was 18.2, 30.0, 30.0, 0.0 and 25.0% for 10, 15, 20, 25 and 30 minutes. 10. The conception rate according to parity of recipients was 26.5, 19.1, 14.3 and 0.0% for the primiparous, the 2nd parous, the 3rd parous and the 4th parous recipients. These results indicated that fresh embryos are more demanded than frozen-thawed embryos for good conception rate in embryo transfer with biopsied-sexed embryo. Also, it was indicated that we should consider embryo-recovering condition, recipient's uterine thickness, transfer site in uterine horn, quality of corpus luteum, time required for transfer and parity of recipient to achieve good conception rate in ET with biopsied-sexed embryos.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.147-160
• /
• 1999

This paper is intended to compare and analyze the fashion trends that were introduced in the recent shows, held abroad and in Korea, so as to investigate how well the designers in Taegu and Kyungbuk (TK) area are keeping up with the international vogue. The research has done, analyzing Pret-a-Porter in Paris and the three events held in the TK area in 1997 -The Taegu Collection, Kyungbuk Fashion Festival and Textile & Apparel Fair and using reference pictures and documentary records. In order to investigate the trends the research is divided by four groups which are the silhouette, the detail, the color and the Fashion image and has done with the help of three postgraduate students. The results are as follows. 1. The Silhouette The slim-line has the greatest importance in the silhouette analysis of the recent collections. Like Elongated and Fit & Flare, tight-fitting and female-line were also appeared quite a lot. Compared with foreign collection, Korean collections put the bigger importance on the slim-line. 2. The Detail The printings, using paintings and plant-logos had the large portion of the accessories in both foreign and Korean collections. Draw string and wrap style were also presented a lot. Especially, at the Korean collections, layerd, corsage, and craft accent were emphasized, too. As for the necklines the similarity was found over the four events considering. Camisole neckline and halter neck were presented the most, and bared top, Vneckline, boat and low-neck which can highlight the feminity were often appeared as well. Considering collars, tailored and peaked collars which are frequently used for the jackets, were usually shown at the collections. Like convertable, shirts, wing and Italian collar, the collars that can be applied for the sports wears were presented a lot. Virtually no variation of design was found in the sleeve analysis. While set-in-sleeve and sleeveless were found commonly, not so many ornaments were added to the sleeves. The ankle and knee length for the pants and skirts were common. Furthermore, including the micro-mini, showing extremely feminine style the mini-style had the 20% portion of the skirt-length. Unbalanced lengths, using bias-cut were presented quite a lot on the runways. Deep slit skirts, wide pants and irregular hem skirts were in vogue. On the runways of Paris, more than 21% of the design was the burmuda pants. 3. The Color Red and Blue were in vogue in the four collections considering. Sometimes, yellowish was combined in Korean collections. Black and pale tone were appeared to be in fashion also with light grayish, moderate and deep tone. 4. The Fashion image As for the fashion image, feminine-decorative trend amounted to the large percentage in korean collections. At the foreign collection feminine-decorative trend and feminine trend were predominant, then mannish trend and simple trend were apeared equally. The research shows that TK area and foreign collections are fairy similar, which means that the designers in TK area have been making their efforts to satisfy the clients who have the international minds. However, compared with foreign collections, TK collections were apprered to be strongly inclined to only a few trends. Consequently the season trends are not as diverse as the foreign trends, which cannot satisfy the fashion taste of the clients in TK area. The local designers should know the tendency and the taste of the clients and make the more efforts to read local clients' mind.

• Clinical and Experimental Reproductive Medicine
• /
• v.11 no.1
• /
• pp.17-32
• /
• 1984

There are numerous reports on the relative risk of pelvic inflammatory disease among the users versus the nonusers of intrauterine device. Reported relative risk varied from no difference between the two groups to 3-9 fold increase in the users. In an attempt to define this relative risk of pelvic inflammatory disease and related microorganisms ,pelvic organ observation and bacteriological study were done through laparoscopy. Specimens for microbiologic culture were obtained simultaneously from the fallopian tubes via laparoscopy and from the endocervix via regular pelvic examination method. The study population was consisted of 30 I.U.D.users and 35 J.U.D.nonusers who visited the Yonsei University Severance Hospital and the Sung-Ga Hospital for laparoscopic sterilization. The results obtained were as follows: 1. There was no difference in age distribution, economic status and numbers of parity and abortion between I.U.D. users and I.U.D. nonusers. 2. The pelvic inflammatory findings were noted on laparoscopy in 2 cases of I.U.D. users, with an incidence of 6.6%. And no pelvic inflammatory finding was noted in any of the nonusers,but this difference was not statistically significant (p>0.005). 3. All the bacteriologic culture of the specimens from the fallopian tubes of both groups yielded negative results. 4. The bacteriologic culture of the spec imens f rom the endocervix revealed more frequent isolation of possible pathogen such as Hem ophilus ,alpha-Streptococcus ,Corynebacteria, Bacteroides in the I.U.D.users than in the nonusers.But,this difference was also not statistically significant (p>0.005).

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.146-165
• /
• 2022

The purpose of this study is to identify differences in the formative characteristics and system of Jobok by comparing the three relics Ui, Sang, and Daedae, which comprised Jeon-Sik's Jobok, with the data in the literature and five excavated Jobok relics, Sin Kyung-yu, Kwon-Woo, Hwasan-Gun, Milchang-Gun, and Lee Ik-jeong, from the 17th and 18th centuries. Jeon-Sik'sJobok was designated as a Gyeongbuk tangible cultural heritage, Sangju JeonSik Jobok and Crafts, in 2021. The three components of Jeon-Sik's Jobok are valuable as historical data since they are the oldest relics confirming colors. Regrettably, the edging fabric of the Ui made of red twill was mostly lost, with only traces remaining. Based on records, it was presumed that the edging fabric was black. It was confirmed that white decorative lines were yet to be used. In Jeon Sik's Sang, only the three front widths and one rear width remain, but the shape of the four rear widths can be inferred, and the creases were held only at the waist. Eighteenth-century Sang was connected at intervals at the end of the waist. Seventeenth-century Sang was connected with a slight overlapping of the rear Sang below the front Sang; therefore, it is assumed that Jeon Sik's Sang was also connected by overlapping the rear by more or less than 5cm below the front. After Hwasan-gun, the Sang was first made using black lines, then white lines were inserted, and, finally, it was pleated from the waist to the hem. The Daedae made the Yo and the Sin by folding the corners to form a 冂 shape with a single long band. The white Ju(紬) and the green yumunsa were used for the Daedae and the edges. This matches the color of the Daedae seen in the Jobok portraits of Milchang-gun, Lee Ik-jeong, and Jeong Hwi-ryang from the 18th century. In the 17th century, the Daedae made the Yo and the Sin by folding a long band like the Daedae of Jeon-Sik. After the 18th century, the Yo and the Sin were made separately and connected. To tie the Daedae to the waist, thin straps were attached at both ends. The relics of Jeon-Sik can be evaluated as reflecting the 17th-century Jobok system in terms of color and shape. Furthermore, it can be said that they are important historical data complementing the insufficient or inaccurate records of the Gukjoolyeui-seolye and Gyeongguk-daejeon.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.80-98
• /
• 2023

In the late Joseon Dynasty, when the bride would ride a palanquin when she went to live with her in-laws, it was a custom to cover the palanquin with tiger skin to ward off misfortunes that may come her way. The higher classes used tiger skin or leopard skin for this purpose, but the common people had to substitute this expensive item with a tiger pattern painted on a blanket. Such blankets were called hotanja, hogu, hoguyok and the like. The term "hotanja" is a pure Korean word. It is not known when the cover for the bridal palanquin was first used, but it was popular from the end of the 19^th century and then gradually disappeared. This is due to the introduction of new Western style weddings that eliminated the need for a bridal palanquin. The tiger print blanket was used not only to cover the bride's palanquin but also to cover a table or floor during the wedding ceremony. This study ran a material analysis on nine pieces of tiger print blankets. All of the blanket artifacts examined in this study had an outer cover and a lining made of fabric that used cotton thread for the warp and wool thread for the weft. Two kinds of wool were found in the weft thread in the outer covers: fat-tailed sheep hair from China and goat hair for carpets from the Hebei province, China. Records show that "blankets with painted tiger patterns" were imported from Russia, and the imported blankets were from Russia and China. The outer cover can be categorized into six types, and the lining into three types depending on the weave and direction of the thread twist. The hem facing can be divided into four types. The lining and outer cover use the full width of the fabric, which was woven in wide widths of 135 cm or wider. The tiger pattern on the blanket was made by stenciling. The stencil design of the body and tail of the tiger were placed on a red blanket to be painted in white, and then the background color of the tiger, which is yellow, would be painted over the white, and then black stripes would be added. The pattern of the tiger varies, which shows that the blankets were made by various craftspeople. The pattern of the tiger print blanket is usually of a tiger lying down, but there were tiger print blankets with a tiger standing up. The pattern of the tiger grew smaller over time, and flower patterns were added in the background. Decorative elements were gradually added to the tiger print blanket patterns, but its function as a palanquin cover became lost. By taking the features of tiger print blankets into consideration, it can be assumed that there are imported pieces among the remaining pieces, and were produced in various places because it was popular at that time.

• Journal of Embryo Transfer
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2007

This study was investigated factors affecting the pregnancy rates after transfer of pronuclear microinjected embryos for the production of transgenic Korean black goats. Embryo transfer was carried out in 343 recipient Korean black goats from September 1999 to June 2000. Estrus was induced by the insertion of intravaginal progesterone devices $CIDR^(R)$ for 2 weeks. A single injection of 400 IU equine chorionic gonadotropin was administered at 48h before $CIDR^(R)$ removal to increase the proportion of does cycling and ovulation rate. Good quality embryos were prepared by microinjection of DNA into the pronuclei of fertilized goat oocyte and cultured in vitro. Pronuclear microinjected $1{\sim}8$ cell stage embryos were surgically transferred into the oviducts of the recipient at day 4 or 5 following $CIDR^(R)$ removal, and morula to blastocyst stage embryos were surgically transferred into uterus at day 9. Pregnancy was diagnosed by transrectal ultrasound scanning at $20{\sim}30d$ and 8 weeks following embryo transfer. The pregnancy rate was affected by several factors, such as estrus induction, the number of previous transfer, transfer site, stage of CL (corpus luteum), the number of recipient CL, stage of embryos and the number of transferred embryo. The pregnancy rate was significantly higher in recipients that came into estrus naturally than recipients that induced to come into estrus with $CIDR^(R)$(59.1% vs. 36.8%; P<0.05). The pregnancy rate was higher when the embryos were transferred into the left oviduct than transferred into the right oviduct (42.9% vs. 35.3%; P<0.05). The pregnancy rate of recipients with $CH_1$ (early) stage corpus hemorrhagicum in ovary was hi틴or than recipient with $CH_3$ (late) stage hemorrhagicum (47.5% vs. 17.9%; P<0.01). Higher pregnancy rates were obtained by transfer of 1-cell stage embryos into oviduct while late blastocysts (51.6% vs. 66.7%; P<0.01) into uterus. The pregnancy rates when 3 embryos were transferred to recipients were significantly higher than when 2 embryos we.e transferred (47.6% vs. 27.0%; P<0.05). Although there were no significant difference among the group, adhesion of reproductive organs, uterine size, ovulation rate of recipients, presence of large follicle and difficulty of transfer affected pregnancy rate of recipient. Higher pregnancy rates were obtained in the recipients with $8{\sim}15m$ diameter uterine horn as compared to the recipients with <5m diameter or >20mm diameter uterine hem (38.9%, 20% vs. 18.2%), in the recipients with large follicle in the ovulated ovary ipsilaterally (53.6% vs. 37.1%) and in the transfer which was carried out easily (39.2% vs. 27.8%, 0%). In conclusion, the high rate of pregnancy was achieved following transfer of pronuclear microinjected embryos when three or four 1-cell stage embryos were transferred into oviduct with $CH_1$ stage corpus hemorrhagicum in the ovary of recipient which came into estrus naturally.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.176-192
• /
• 1991

School nurses, in service of 102 special schools in Korea, were urveyed by mail questionnaires from February to March, 1991 and 77 of hem responded. Collected data were analyzed to establish the direction of health management in special school and to provide basic reference data for improving the quality of the management of school-nurses' services. The major findings are as follows: Out of special schools surveyed, 67.5% is private school and 83.2% is located in city. The average number of classes, students, and educational personnels per special school is 17.2, 194, and 28 respectively. The average age of school-nurses surveyed is 32.7. The proportion of graduates from the junior college and upward was 97.4%, the proportion of the married was 71.4%. Out of respondents, 71.4% has religion : 79.2% has past career in the fields of clinics or public health: 62.3% accompanishes independent services: 77.9% belongs to primary school. About 69% of nursing room in special schools surveyed is located at the first floor. Out of special school surveyed, 90.9% has no organization for school health programms: Only 18.2% entrusted everyone of school doctor, school dentist, and school pharmacists with school health. 46.8% of respondents didn't know about the annual budget for school health programmes. The average annual expenditure for school health programme per special school was 317,000F26. won and the purchase cost for medical supplies accounted for the larger part of them. The monthly average number of students utilizing school nursing room was 71 per school, annual utilization times of school nursing room was 4.4 per student and utilization due to injury was prevalent by 26.6% and there is some differences in using the school nursing room according to disabled area. Rate of referral to medical facilities was 1.4%. The leading reason of referral to medical facilities was high fever among those who have visual handicaps, fracture among those who have emotional disturbance, injury by trauma among others. Nine hundred fifty six students of students in special school surveyed have sufferd from epilepsy and prevalence rate of epilepsy was 6.4%. Only 22.6% of respondents replied that they had physical examination more than 2 times per year. Out of respnodents, 98.7% answered that they had health education and 67.1% of them ansered that they educated in a classroom, 98.7% of respondents emphasized need of sex education. Respondents put the most emphasis on the personal hygiene when they performed health education and they used broadcasting education in the area of visual handicaps, OHP or VTR in hearing handicaps, home correspondence or OHP VTR in other area importantly. About 47% of repondents answered that health education was the most difficult and they emphasized that definite guide on health management was requested. Respondents had self-confidence and high perfomance rate in most of school-nurses' services completely, but so they was not in area of evaluation of school health programmes, an examination of physical strength, evaluation of health education, management of school purification area, suture of wounds. In consideration of above findings, we may conclude that special education for school-nurse in special schools as well as improvement of definite guiding principles are requested to establish direction for health management in special schools and to improve the degree of quality for school-nurses' sevices in special schools.