• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.4
• /
• pp.281-287
• /
• 1994

This experiment was canied out to determine the effects of 3cn1, 6cm, and lOcm of cutting height at harvest on the grass growth, dry matter(DM) yield, and weeds development in reed canarygrass(Phu1uris umndinacea L.) pasttire. The cultivars of reed canarygrass used in this study were Palaton. Veuture and Frontier(contro1). and the grass was harvested four times at soiling stage in 1992. The plant height at first harvest was 84, 96 and 94cm in Palaton, Venture and Frontier, respectively. The average regrowth height was same as 59cm in three cultivars. However, the regrowth height by cutting height was 61 -65cm in 6 and IOcm, and 51 -53cm in 3cm of low cutting height. Annual DM yield was not different in three cultivars of Palaton(l2.58lkg), Venture(l2,752kg), and Frontier (12,243kgIha). The yield at first harvmt wa5 significantly high in 3cm of height, however, the forage yields at second, third and fourth harvest were greatly high in 6cm of stubble height(P<0.05). Total yields by 3, 6 and lOcm of cutting height were 12.306. 14,094 and 11,342kg in Palaton, 12,794, 14,155 and 11,307kg in Venture, and 12,258, 12,940, and 11.535kglhg in Frontier, respectively. The highest yield was achieved in 6cm of stubble heigth(P<0.05). Daily DM production during grass regrowth was not affected by cultivars, and the best regrowth was observed by 6cm of cutting height. Development of weeds was high in 3cm of low stubble height, regradless of cultivars. The contents of crude protein, neutral detergent fiber, acid detergent fiber, and hemicellulose were not affected by cultivar and cutting height. In conclusion, it is suggested that the 6cm of cutting height is the most effective for grass regrowth, forage production, and weed control in reed canarygrass pasture. regradless of cultivm of Palaton, Venture and Frontier.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.2
• /
• pp.221-270
• /
• 1998

Objective This research is a study about constitutional diagnosis through the external appearances as a basic principle, and it is for finding shape differences of the ear, eye, nose, mouth according to the Sasang constitution Method We have collected 209 cases of patients of the Sasang Constitutional Department, including employees of the Kyung-Hee Medical Center and took pictures of the frontal view, lateral view, oblique view of face and measured heights, deapth, breadths of ear, eye, nose, mouth with 'The Measurement of R. Martin'. We analyzed shape differences of the face according to the Sasang constitution with certain results Results We got the morphologic characteristics of ear, eye, nose and mouth according to the Sasang constitution as Table 3. -Table 10. Conclusion : 1. The morphologic characteristics of Ear according to the Sasang constitution (1) Morphologic ear length, Physiognomic ear length, Ear lobule length is longer in Taeumin than Soeumin. (2) Physiognomic ear breadth is wider in Taeumin than Soeumin. (3) Physiognomic ear length, lobule length ratio is higher in Taeumin than Soyangin. 2. The morphologic characteristics of Eye according to the Sasang constitution. (1) Inner Palpebral fissure width, 5th Palpebral fissure length, Bizygomatic breadth-Outercanthal distance is the longest in Taeumin (2) Palpebral fissure inclination is widest in Soeumin. (3) Palpebral fissure length is longer in Taeumin than Soeumin. (4) Pupillary diameter ratio is the lowest in Taeumin (5) Palpebral fissure length, width ratio is higher in Soeumin than Taeumin. (6)zygomatic breadth, Bizygomatic breadth-Outercanthal distance ratio is the higher in Taeumin than Soeumin. 3. The morphologic characteristics of Nose according to the Sasang constitution. (1) Nasion depth is deepest in Soyangin. (2) Nasion to pupillary depth is deeper Soyangin than Taeumin. (3) Nasal tip depth, Nostril to Nasalalar depth is deeper Soyangin than Taeumin. (4) Subnasale to Nasalalar depth is the shallowest in Taeumin (5) Nasalalar height is lowest in Soeumin. (6) Nasalalar to Nostril distance is deeper Taeumin than Soeumin. (7) Nasal tip depth, Nasal depth ratio is the highest in Taeumin (8) Nasal depth Nasalalar heightratio is lowest in Soeumin. (9) Midfaceheight, Nasal tip depth ratio is higher Soyangin than Taeumin. 4. The morphologic characteristics of mouth according to the Sasang constitution. (1) Lower mid lip height, Lower philtrum height, Lower quarter lip height, Total middle lip height, Total philtrum height, Total quarter lip height is the shottest in Soyangin. (2) Upper mid lip height, Upper philtrum height is longer in Taeumin than Soyangin (3) Lip inclination is higher in Soeumin than Soyangin. (4) Intercheilion breadth, total height ratio is lowest in Soyangin. (5) Total lip height, Upper philtrum height ratio is higher in Soyangin than Soeumin. (6) Lower lip height Lower quarter lip height ratio is higher in Soyangin than Taeumin. (8) Total lip area is wider in Taeumin than Soyangin.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2023

Objective: The purpose of this study was to investigate the differences in static arch height and ankle stability according to the preference for insole height and hardness in the arch area. Method: The study participants were 20 adult males (age: 22.7 ± 1.8 yrs., height: 175.3 ± 4.3 cm, body weight: 72.5 ± 7.7 kg). First, the arch heights of all subjects were measured in static postures (sitting and standing). The inversion and eversion movements of the ankle joint were analyzed during walking (1.3 m/s & 1.7 m/s) and running (2.7 m/s & 3.3 m/s). The variables (static arch height, and inversion and eversion angle of ankle joint) were compared by classifying groups according to the preference for the height and hardness of the arch of the insole. First, it was divided into a high arch insole preference group (HAG, n=8) and a low arch insole preference group (LAG, n=12) according to the preference for the arch height of the insole. Second, it was divided into a high hardness insole preference group (HHG, n=7), medium hardness insole preference group (MHG, n=7), and low hardness insole preference group (LHG, n=6), according to the preference for the arch hardness of the insole. Results: First, the range of motion (ROM) of inversion-eversion at the ankle joint during walking was statistically smaller in HAG than in LAG (p<.05). Second, the arch height change of HHG was statistically greater than that of MHG and LHG (p<.05). Conclusion: In the case of flexible flat feet with a large change in arch height, providing a high hardness arch insole that can disperse foot pressure can improve comfort. It was found that people with high medial and lateral sway of the ankle joint preferred a low arch insole, but it is necessary to differentiate and compare the insole heights of the arch part in detail. In addition, in the case of fast motion such as running, the preference for the arch height and hardness of the insole was not related to the static arch height and ankle stability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.343-350
• /
• 2014

Object recognition is one of the key technologies of the monitoring system for the prevention of crimes diversified the intelligent. The height is one of the physical information of the person, it may be important information to confirm the identity with physical characteristics of the subject has. In this paper, we provide a method of measuring the height that utilize RGB-Depth camera, the Kinect. Given that in order to measure the height of a person, and know the height of Kinect, by using the depth information of Kinect the distance to the head and foot of Kinect, estimating the height of a person. The proposed method throughout the experiment confirms that it is effective to estimate the height of a person in the room.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.167-173
• /
• 1998

Many workers like welders work in squatting postures with the object on the ground during an entire work shift. It is suspected that such prolonged squatting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to examine the physical stress caused by the prolonged squatting and to recommend a safe work/rest schedule for a welding task with squatting posture based on the lab experiments. In this study, 8 healthy student subjects participated in the experiment. They maintained a squatting work posture for 16 minutes with 4 different stool height conditions: no stool; 10cm height; 15cm height; and 20cm height. Every 2 minutes, the discomfort was subjectively assessed with the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort ratings, we found that a 10cm height stool relieved the workload most. Discomfort rating results also indicated that a 20cm height stool showed the highest workload, and the there were no difference in workload between a 15cm height stool and no stool. We recommend to use low height stools and to maintain such working postures no longer than 6 minutes for prolonged squatting tasks.

• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.181-183
• /
• 2006

Digital topographic map in Korea contains layers of spatial and attribute data for 8 land features such as railroads, watercourses, roads, buildings and etc. Some of the layers such as building and forest don't include any information about height, which can be just prepared by interpretation of remote sensed data or field survey. LiDAR(Light Detection And Ranging) data using active pulse and digital camera provides data about height and form of land features. LiDAR data can be used not only to extract the outline of land features but also to estimate the height. This study presents technical availability for extraction and estimation of land feature's outline and height using LiDAR data which composes of natural and artificial land features, and digital aerial photograph which was taken simultaneously with the LiDAR. The estimated location, outline and height of land features were compared with the field survey data, and we could find that LiDAR data and digital aerial photograph can be a useful source for estimating the height of land features as well as extracting the outline.

• Journal of Korean Academy of Nursing
• /
• v.41 no.6
• /
• pp.758-767
• /
• 2011

Purpose: This study was done to examine the threshold value of estimated height loss at which the risk of osteoporosis increases and to verify its discriminative ability in the detection of osteoporosis. Methods: It was conducted based on epidemiological descriptive methods on 732 Korean women at a public healthcare center in Seoul between July and November 2010. ANOVA, Pearson correlation, logistic regression analysis and receiver operating characteristics (ROC) curve were used for data analysis. Results: There was an age-related correlation between bone mineral density (lumbar spine: F=37.88, p<.001; femur: F=54.27, p<.001) and estimated height loss (F=27.68, p<.001). Estimated height loss increased significantly with decreasing bone mineral density (lumbar spine: r=-.23, p<.001; femur: r=-.34, p<.001). The odds ratio for the point at which the estimated height loss affects the occurrence of osteoporosis was found to increase at a cut-off value of 2 cm and the area under ROC curve was .71 and .82 in lumbar spine and femur, respectively. Conclusion: The optimal cut-off value of the estimated height loss for detection of osteoporosis was 2 cm. Height loss is therefore a useful indicator for the self-assessment and prognosis of osteoporosis.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.284-290
• /
• 2020

In this paper, we propose a method to generate and optimize the height map that is suitable to render a soap bubble. The height map represents the flow speed of soap bubbles. To this end, we have analyzed the flow of the soap bubble surface through experiment, derived the moving speed value for each section. Some image filters have been used for optimization that reflects the parameters of the derived height map. In addition, in order to verify the results of the study, actual data measuring the surface flow speed of soap bubbles, the speed of the initial height map, and the optimized height map speed have been compared and tested. Through this study, we reach the issue that it is possible to express the variable flow speed of soap bubbles with the optimized height map, and it will help to express various fluids.

• Interdisciplinary Bio Central
• /
• v.3 no.3
• /
• pp.11.1-11.5
• /
• 2011

The MRI (magnetic resonance imaging) volumetric analysis of the brain was performed in 59 healthy elderly Koreans (aged 62-76 years; 34 male, 25 female) to investigate whether the previously reported significant correlations between body height and brain volumes in the young aged Koreans (20's) still exist in the old aged Koreans (60's and 70's). Unlike previously reported significant correlations in the young aged Koreans, neither the correlation between whole brain volume and body height in male nor the correlation between cerebellar volume and body height in female show any significance in the old aged Koreans. The significant correlation between body height and whole brain volume was still observed when both male and female data were combined (r=0.27, P<0.05), but the correlation coef-ficient and the level of significance markedly decreased from those of previously reported Korean youth data (r=0.67, P<0.01). Simple linear regression analysis shows decrease of explanatory power of height (measured in $r^2$) from 44% in the youth group to 7% in the old age group on the variance of whole brain volume. Multiple linear regression analysis shows that age and sex, rather than height, are major explanatory variables for whole brain volume in the old aged Koreans. The loss of correlations in the aged group is suspected to be mainly due to age related brain volume changes.