• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.99-110
• /
• 2023

In this paper, we propose a system termed ForestLi that can accurately estimate the diameter at breast height (DBH) and tree height using LiDAR point cloud data. The ForestLi system processes LiDAR point cloud data through the following steps: downsampling, outlier removal, ground segmentation, ground height normalization, stem extraction, individual tree segmentation, and DBH and tree height measurement. A commercial system, such as LiDAR360, for processing LiDAR point cloud data requires the user to directly correct errors in lower vegetation and individual tree segmentation. In contrast, the ForestLi system can automatically remove LiDAR point cloud data that correspond to lower vegetation in order to improve the accuracy of estimating DBH and tree height. This enables the ForestLi system to reduce the total processing time as well as enhance the accuracy of accuracy of measuring DBH and tree height compared to the LiDAR360 system. We performed an empirical study to confirm that the ForestLi system outperforms the LiDAR360 system in terms of the total processing time and accuracy of measuring DBH and tree height.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.55-58
• /
• 2007

This study describes a problem of the Original Bench Mark which is used currently. We calculate New Mean Sea Level(MSL) in Incheon Port using tide data for 57 months and take 8 points GPS/Leveling data in research area. We calculate orthometric height of one control point using tide data and GPS/Leveling data. After fixed the control point, we decide final orthometric heights using relative geoidal height and ellipsoidal height from GPS survey. To analysis the Original Bench Mark compares final orthometric heights with the orthometric heights in Korea height system. We get the result that the New Original Bench Mark's height is 26.7176m. It appears 3.05cm difference as the Original Bench Mark's height is 26.6871cm in Korea height system.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.41-49
• /
• 1996

Effects of ambient geometry on the liftoff characteristics are experimentally studied for nonpremixed turbulent jet flames. To clarify the inconsistency of the nozzle diameter effect on the liftoff height, the ambiences of finite and infinite domains are studied. For nonpremixed turbulent jet issuing from a straight nozzle to infinite domain, flame liftoff height increases linearly with nozzle exit mean velocity and is independent of nozzle diameter. With the circular plate installed on the upstream of nozzle exit, flame liftoff height is lower with plate at jet exit than without, but flame liftoff characteristics are similar to the case of infinite domain. For the confined jet having axisymmetric wall boundary, the ratio of the liftoff height and nozzle diameter is proportional to the nozzle exit mean velocity demonstrating the effect of the nozzle diameter on the liftoff height. The liftoff height increases with decreasing outer axisymmetric wall diameter. At blowout conditions, the blowout velocity decreases with decreasing outer axisymmetric wall diameter and liftoff heights at blowout are approximately 50 times of nozzle diameter.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.1
• /
• pp.129-136
• /
• 1998

Pressure drop and heat transfer characteristics of a periodically fully developed flow in the flat channel with protrusions are investigated. The effects of shape and location of protrusion on the pressure drop and heat transfer are numerically analyzed in the present study. Taguchi method is used to optimize these parameters. It is found that the ratio of the height of protrusion to channel height shows larger influence on the pressure drop and heat transfer than the ratio of the length of protrusion to module length. As the height of protrusion increases, pressure drop and heat transfer increase, but if the height of protrusion exceeds 2/3 of the channel height, there is a substantial pressure drop. The results also show that the optimal length and height of protrusion are half of the module length and half of the channel height, respectively.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.90-94
• /
• 1997

Many workers like welders are working in squat sitting postures with te object on the ground for an entire work shift. It is suspected that such prolonged squat sitting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to quantitatively evaluate the physical stress caused by the prolonged squat sitting and to recommend a safe work/rest schedule for the task with squat sitting posture based on the lab experiment. In this study, 8 healthy student subjects participated in the experiment. They maintained a squat sitting posture for 16 minutes with 4 different stool height conditions: no stool, 10cm hight, 15cm height, 20cm height. Every 2 minutes, the discomfort was subjectively assessed using the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort rating, we found that 10cm height stool relieved the workload most. Discomfort rating results also indicated that 20cm height stool showed the heghest workload, and that there was no difference in workload between 15cm height and no stool. We recommend to provide the workers with 10cm height stool for prolonged squat sitting tasks.

• Journal of the Korean housing association
• /
• v.20 no.3
• /
• pp.105-112
• /
• 2009

The purpose of this study is to investigate a top floor, indoor, thermal environment by comparison between the indoor air temperature and the rooftop surface temperature, and between the indoor air temperature and the outdoor air temperature using an experimental model. The model experiment was conducted with 4 cases,: no-rainfall, 1 em-height, 10 em-height and 20em-height of rainfall on the rooftop. According to the results of the height of stored rainfall, the average air temperature difference between the indoor and outdoor air with 1, 10 and 20 em-height of rainfall on the rooftop was $4.0^{\circ}C$, rooftop $1.2^{\circ}C$ and rooftop $1.0^{\circ}C$, respectively. The upper 10 em-height of rainfall on the rooftop acted to decrease the indoor air temperature on the top floor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.2 no.1
• /
• pp.10-16
• /
• 1982

This study was carried out to measure the flaw height of welds in consideration of the effective probe angle in ultrasonic oblique detection. Specimens with inserted artificial flaws were made and flaw heights were estimated from detecting these specimens. Two different methods were applied to estimate flaw heights. From the result of the experiment, flaw height could be measured within the accuracy of 15% percent error and the difference between the probe distance method and beam path method is about 5% relatively small. It is considered that the results obtained this experimental study could be helpful informal ions for measuring flaw height.

• Journal of Forest and Environmental Science
• /
• v.27 no.1
• /
• pp.47-54
• /
• 2011

Allometry and basal area equations were developed with various tree measurement variables for the major species; Quercus variabilis, Quercus mongolica, Pinus koraiensis and Larix leptolepis in Korea. For allometry models, the relationships between total height-DBH, crown width-DBH, height to the widest portion of the crown-total height, and height to base of crown-total height were investigated. Multiple regression methods were used to relate annual basal area growth to tree variables of initial size (DBH, total height, and crown width), relative size (relative diameter and relative height) as well as competition measures (competition index, crown class, and live crown ratio).

• East Asian mathematical journal
• /
• v.32 no.1
• /
• pp.61-75
• /
• 2016

If ${\phi}$ is a polarizable endomorphism on a projective variety, then the Weil height machine guarantees that ${\phi}$ satisfies Northcott's theorem. In this paper, we show that Northcott's theorem only holds for polarizable endomorphisms and generalize this result to arbitrary dominant endomorphisms: we introduce the height expansion and contraction coefficients which provide weak Northcott's theorem for dominant endomorphisms. We also give some applications of the height expansion and contraction coefficients.

• Clinical and Experimental Pediatrics
• /
• v.51 no.10
• /
• pp.1090-1095
• /
• 2008

Purpose : To assess the height growth of children with epilepsy receiving antiepileptic drugs (AEDs) and the related factors. Methods : The subjects were 148 children diagnosed with epilepsy at Pusan National University Hospital between January 1996 and December 2003, who received AEDs for more than 3 y. We measured height at the initiation of AED medication and at the last visit during AED medication. We analyzed the mean height standard deviation score (SDS) according to several factors, including sex, age at initial medication, seizure type, underlying causes of epilepsy, seizure frequency before AED medication, seizure control, number of AEDs, height SDS before medication, and duration of medication. Results : In the total population, height SDS at initial therapy and last follow-up were $-0.06{\pm}1.39$ versus $0.10{\pm}1.12$ (P=0.09). Children with controlled seizures showed a significant increase in height SDS, from $-0.12{\pm}1.39$ to $0.10{\pm}1.09$ (P=0.04), and children on medication for less than 6 y showed a significant increase in height SDS, from $-0.09{\pm}1.54$ to $0.21{\pm}1.07$ (P=0.03). Also, children with negative initial height SDS showed a significant increase in height SDS (P<0.05). No height SDS changes were observed in any of the other groups, regardless of sex, seizure type, underlying causes of epilepsy, or age at initial medication. Conclusion : Neither epilepsy nor AED medication affects long-term height growth. Controlled seizure and short duration of AED medication are positive factors for height growth in children with epilepsy.