• Korean Journal of Metals and Materials
• /
• v.47 no.5
• /
• pp.297-303
• /
• 2009

Solvent extraction experiments of cupric and cuprous chloride with Alamine336 have been performed from HCl solution. In order to identify the solvent extraction reaction, distribution diagram of cupric and cuprous species with HCl concentration was obtained by considering complex formation reaction and the activity coefficient of solutes with Pitzer equation. Analysis of the solvent extraction data by graphical method together with the distribution diagram of copper indicated that solvent extraction reaction of copper with Alamine336 depends on HCl concentration. In strong HCl solution of 3 and 5 M, ${CuCl_4}^{2-}$ and ${CuCl_3}^{2-}$ took part in the solvent extraction reaction as Cu(II) and Cu(I), respectively. When HCl concentration was 1 M, ${CuCl_2}^-$ was extracted into the organic phase in the case of Cu(I) while adduct formation between $Cu^{2+}$ and Alamine336 was responsible for the solvent extraction reaction of Cu(II).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.113-116
• /
• 2011

Slope analysis method was applied to determine the stoichiometry of the solvent extraction reaction of Ni(II) by Alamine336 from strong HCl solution range from 1 to 10 M. Solvent extraction data was obtained from the literature. The effective equilibrium constant for the solvent extraction reaction was estimated by considering the ionic equilibria of $NiCl_2$ in the HCl solution. The measured distribution coefficients of Ni(II) agreed well with those calculated in this study. Our results suggest that further study on the measurement of the activities of nickel complexes at high HCl solution need to be done.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.46-51
• /
• 2000

Environmental quality regulations are used to establish the maximum permissible concentrations of heavy metals before a site can be deemed to be polluted or contaminated. This paper compares the results obtained by 0.IN HCl extraction and acid extraction method(HNO$_3$+HClO$_4$.HCl). The leaching efficiency of 0.1N HCl extraction is directly proportional to the final pH of leachate, due to the different solubilities of the heavy metals at different pH values, The severe differences between 0.1N HCl-extractable and total metal contents result mainly from the buffering effect of carbonates, present in sediment. samples. Application of sequential extraction experiments to some sediments collected from gully pot in Seoul illustrates a much stronger scavenging effect by Fe and Mn-hydroxides, carbonates and organic phases. As deduced from both sequential extraction and leaching experiments, the relative mobility of heavy metals is found to be: Mn>Zn>>Co>Cd>>Cu>Pb>Cr>Fe, in spite of large differences in heavy metal content and localization. Changes in the physicochemical environments (such as acidification) caused by a traffic accident may result in the severe environmental pollution of heavy metals of surrounding area( surface water and rivers).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.110-117
• /
• 2008

Soybeans (Glycine max) with a black seed coat have been widely utilized as food source and as a medicinal herbs in Korea. The pigmentation in the seed coat of black soybean is due to accumulate anthocyanins in the epidermis palisade layer. The anthocyanin content and composition of the black soybean seed coat are considered as a standard. of quality evaluation of black soybean. The main objective of this study was to investigate the optimal condition for an extraction method of anthocyanins and compare anthocyanin quantity and composition within black soybean varieties and germplasms. In the test of extraction solvent, absorbance at 530 nm and Hunter's a value were increased as increasing the concentration of MeOH, but Hunter's Land b values were the exact opposite of absorbance and Hunter's a values. There was no significant difference for anthocyanin contents from 1% HCl - $H_2O$ to 1% HCl - 80% MeOH. In the aspects of anthocyanin contents and HPLC peak resolution, 1% HCl - 20% MeOH extraction solution was the most suitable solvent. Among the 5 kinds of extraction method using 1% HCl - 20% MeOH solution, the anthocyanin contents of room temperature extraction at 72 h was the highest among the methods. High extraction temperature, sonication and reflux method influenced on the decrease of anthocyanin contents because of breakdown of anthocyanins. There was no significant difference for extraction time between 12 h and 24 h. However, the optimal extraction condition were at room temperature for 12 h. The anthocyanin contents in seed coats of black soybean were determined on the basis of HPLC peak area at 530 nm. Ten black soybean varieties and germplasms were tested with optimal conditions founded in this study. On the basis of antocyanin component, these can be classified into three groups; C3G, C3G + D3G and C3G + D3G + Pt3G. The total anthocyanin content in seed coats ranged from 1.58 to 10.62 mg/g of seed. The total anthocyanin content of the variety "Geomjeongol" was about 7 times higher than that of variety "Heugchong". Information for extraction method and diversity in antocyanin of soybean seed coats can be used for future research for germplasm evaluation and development of high quality black soybean varieties.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.6-8
• /
• 2005

The forest soils of 92 sites in Korea were analyzed to survey heavy metal background levels using aqua regia digestion method and 0.1N HCl extraction method. From these results, the average natural contents of heavy metals were Cd 0.287, Cu 15.26, Pb 18.43, Cr 25.36, Zn 54.27, Ni 17.68mg/kg for aqua regia method, and Cd 0.040, Cu 0.48, Pb 3.06, Cr 0.09, Zn 1.54, Ni 0.27mg/kg for 0.1N HCl extraction method. The range of correlation coefficients between heavy metal contents obtained from two methods(aqua regia and 0.1N HCl) was significant as $0.24{\sim}0.88$, and the correlation coefficients were decreased in order of Cd, Pb, Cu, Ni, Cr, Zn.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• Journal of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.139-141
• /
• 1968

The extraction curve of metal ions with Amberite LAl-chloroform has been found to be more steeper than with Amberite LAl-xylene or hexane, and the extraction ratio of Zn (II) in 2M HCl solution is 98%. The extraction ratio of As (III) in 9~11M HCl soln., Sb (III) in 2~4M HCl soln., and Fe (III) in 6~10M HCl soln. are 100%. The separated elements from Bi metal were determined by colorimetry, Zn (III) with dithizone, As (III) with Gutzeit method, Sb (III) with brilliant green and Fe (III) with thiocyanate.

• Environmental Engineering Research
• /
• v.17 no.3
• /
• pp.145-150
• /
• 2012

Pb-contaminated soil at a clay shooting range was analyzed by the sequential extraction method to identify metal binding properties in terms of detrital and non-detrital forms of the soil. Most of the metals in the soils existed as non-detrital forms, exchangeable and carbonate-bound forms, which could be easily released from the soil by a washing method. Therefore, the characteristics of Pb desorption for remediation of the Pb-contaminated soil were evaluated using hydrochloric acid (HCl) by a washing method. Batch experiments were performed to identify the factors influencing extraction efficiency. The effects of the solid to liquid (S/L) ratio (1:2, 1:3, and 1:4), soil particle size, and extraction time on the removal capacity of Pb by HCl were evaluated. Soil samples were collected from two different areas: a slope area (SA) and a land area (LA) at the field. As results, the optimal conditions at 2.8 to 0.075 mm of particle size were 1:3 of the S/L ratio and 10 min of extraction time for SA, and 1:4 of the S/L ratio and 5 min of extraction time for LA. The characteristics of Pb desorption were adequately described by two-reaction kinetic models.

• Korean Journal of Metals and Materials
• /
• v.46 no.4
• /
• pp.227-232
• /
• 2008

Solvent extraction reaction of cobalt by Alamine336 from strong hydrochloric acid solution was identified by analyzing the solvent extraction data reported in the literature. Analysis of the data by graphical method revealed that Alamine336 took part in the solvent extraction reaction as a monomer in the concentration ranges, [Co(II)] : 0.0169 - 0.102 M, [Alamine336] ; 0.02- 1.75 M, and [HCl ] : 5 - 10 M. The following solvent extraction reaction and equilibrium constant was obtained from the experimental data by considering the activity coefficients of chemical species present in the aqueous phase. $Co^{2+}+2Cl^{-}+R_3NHCl_{org}=CoCl_3\;R_3NH_{org}$, $K_{ex}=2.21$ The distribution coefficients of cobalt predicted in this study agreed well with those reported in the literature.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.42-50
• /
• 2011

Potential risk of heavy metals to various receptors including humans depends on the bioavailability of the heavy metals in soil. In this study, the heavy metal extraction methods using 0.1N HCl and aqua regia were compared with the Tessier's sequential extraction method to assess whether these two methods can be used to determine the plant-available heavy metal concentrations. The contamination characteristics of copper (Cu), cadmium (Cd), lead (Pb), and arsenic (As) found in soils collected from 75 sites around the closed Janghang smelter were analyzed by extracting heavy metals using 0.1 N HCl, aqua regia, and the Tessier's sequential extraction method. The portion of metals bioavailable to plants is considered as the sum of the fraction 1 (exchangeable) and the fraction 2 (carbonates binding) of the Tessier's 5-step sequential extraction method, which were determined to be 3.1 ${\pm}$ 3.82, 0.6 ${\pm}$ 0.15, 20.6 ${\pm}$ 18.78, and 7.0 ${\pm}$ 6.48 mg/kg for Cu, Cd, Pb, and As, respectively, in this study. When the extraction using aqua regia and the Tessier's extraction method were compared, the extracted Cu and Pb concentrations did not show significant differences, whereas the extracted Cd and As concentrations showed significant differences. These results indicate that the portion of Cd and As in the fraction 5 of the Tessier's sequential extraction can not be extracted using aqua regia. Using aqua regia, which is the official test method, higher concentrations of Cu, Cd, Pb and As were extracted than the sum of the fraction 1 and 2. The results show that only 9, 40, 39 and 10% of Cu, Cd, Pb and As using aqua regia can be uptaken by plants (i.e., plant-available). Using 0.1N HCl, the portion of Cd equivalent to about 66% the fraction 1 could be extracted, while, with Pb, the portion of the fraction 1 and about 90% of the fraction 2 could be extracted. With As, the portion equivalent to the fraction 1, 2 and 79% of the fraction 3 was extracted, while with Cu, the portion equivalent to the fraction 1, 2, 3 and 20% of the fraction 4 was extracted using 0.1N HCl.