• 펄프종이기술
• /
• 제42권5호
• /
• pp.67-73
• /
• 2010

Paper packaging materials are essential in protection and transportation of commercial or industrial products. Raw materials for packaging paper production are mainly obtained from various grades of waste paper. For this reason, the recycled fibers from waste paper would probably have possibility of containing heavy metals. This study was focused on the development of optimum pre-treatment method for the quantitative analysis of mercury. The optimum pre-treatment for open digestion system were obtained at the treatment conditions of acid combination with $HNO_3/HCl/H_2O_2$ or $HNO_3/H_2SO_4$ at $80^{\circ}C$. The optimum pre-treatment conditions in closed digestion system were determinated by the acid combination with $HNO_3/HCl/H_2O_2/HF$ in microwave at 320 W for 20 min. The recovery rate in open digestion system was 85~94% and in closed digestion system was indicated as about 100%. Therefore, the closed system is superior than the open system in pre-treatment method for the quantitative analysis of mercury, and the detected mercury contents in the sample of KOCC, AOCC and kraft sack paper were measured below 1 ppm.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.89-89
• /
• 2009

높은 소수반송자 수명(life-time)을 가지는 고품위 실리콘 기판은 고효율 실리콘 이종접합 태양전지 제작을 위한 중요 요소 기술 중 하나이다. 본 연구에서는 n-type c-Si 기판을 이용한 고효율 실리콘 이종접합 태양전지제작을 위해 hot water oxidation(HWO) 공정을 이용하여 고품위 실리콘 기판을 제작하였다. 실리콘 기판의 특성 분석은 Qusi-steady state photoconductance (QSSPC)를 이용하여 소수반송자 수명을 측정하였으며, 기판의 면저항 및 wetting angle을 측정하여 공정에 따른 특성변화를 분석하였다. Saw damage etching 된 기판을 웨이퍼 표면으로부터 particle, 금속 불순물, 유기물 등의 오염을 제거하기 위해 $60{\sim}85^{\circ}C$로 가열된 Ammonia수, 과산화수소수($NH_4OH/H_2O_2/H_2O$), 염산 과산화수소수($HCL/H_2O_2/H_2O$) 및 실온 희석불산(DHF) 중에 기판을 각각 10분 정도씩 침적하여, 각각의 약액 처리 후에 매회 10분 정도씩 순수(DI water)에서 rinse하여 RCA 세정을 진행한 후 HWO 공정을 통해 기판 표면에 얇은 산화막 을 형성시켜 패시베이션 해주었다. HF를 이용하여 자연산화막을 제거시 HWO 공정을 거친 기판은 매끄러운 표면과 패시베이션 영향으로 기판의 소수 반송자 수명이 증가하며, 태양전지 제작시 접촉저항을 감소시켜 효율을 증가 시킬수 있다. HWO 공정은 반응조 안의 DI water 온도와 반응 시간에 따라 life-time을 측정하여 진행하였으며, 이후 PE-CVD법으로 증착된 a-Si:H layer 및 투명전도 산화막, 금속전극을 증착하여 실리콘 이종접합 태양전지를 제작하였다.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.344-347
• /
• 2003

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.567-574
• /
• 2016

We have analyzed chemical properties of polysiloxane and polysilazane films, respectively, as sealing materials for electrostatic chuck (ESC) and have investigated the possibility of polysilazane as an alternative sealant to polysiloxane. It has been revealed that Si-O with organic bonding ($Si-CH_3$) existed in polysiloxane films compared to only pure Si-O bonding in polysilazane films. The sealing property of polysilazane has been found outstanding even in a short time of application. In the polysiloxane films containing $H_2O$, pin holes have been found possibly due to $CO_2$ gas evolution, and low adhesion with Si substrate has been observed after heat stress test in connection with the existence of organic bonding. After acid resistance test in 0.5 vol.% HF, 68 wt.% $HNO_3$, and 37 wt.% HCl solution, polyilazane films have shown a longer survival times. Compared to the conventional polysiloxane sealant, polysilazane is expected as a new sealing material because of good thermal and chemical stability.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.42-45
• /
• 2005

Accurate prediction of the fate and transport of contaminants in soils and sediments is very Important to environmental risk assessment and effective remediation of contaminated soils and sediments. The fate and transport of contaminants in subsurface are affected by geosorbents, especially carbonaceous materials including black carbon. Various physical and chemical treatment methods have been developed to separate different kinds of carbonaceous materials from soils and sediments. However, the effects of these separation methods on the properties of remaining carbonaceous materials including sorption capacity and linearity are unclear. The objective of this study is to determine if the chemical and thermal treatment methods previously used to separate different carbonaceous material fractions affect the properties of carbonaceous materials including longer term sorption capacity of hydrophobic organic contaminants. The results indicate that treatments with hydrochloric acid (HCl)/hydrofluoric acid (HF), trifluoroacetic acid (TFA), sodium hydroxide (NaOH) may not affect the sorption capacity of black carbon reference materials such as char and soot, however, treatments with acid dichromate $(K_2Cr_2O_7/H_2SO_4)$ and heat $(375^{\circ}C)$ for 24 hours in sufficient of oxygen) decrease the sorption capacity of them. The results of longer term sorption isotherm indicate that 2 days might be enough for trichloroethene (TCE) to equilibrate apparently with treated black carbon reference materials. The results suggest that acid dichromate and heat treatments may not appropriate method to investigate sorption properties of black carbon in soils and sediments.

• 자원리싸이클링
• /
• 제20권6호
• /
• pp.56-62
• /
• 2011

지르코늄은 우수한 내식성과 낮은 중성자 흡수단면적로 인해 원자로에서 구조재로 사용된다. 수용액의 pH에 따른 지르코늄을 함유한 화학종의 농도분포와 용해도의 변화를 구했다. 염산과 질산용액에서 지르코늄이온의 착물형성반응을 고려하여 무기산의 농도에 따른 농도분포를 해석하였다. 질산용액에서 Cyanex272에 의한 지르코늄 추출에 관한 문헌자료를 이용하여 지르코늄과 질산이온간의 Bromley매개변수를 구했다. 이와 같이 구한 매개변수값은 등온추출곡선의 계산이나 하프늄과의 분리인자 예측에 활용될 수 있다.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.45-51
• /
• 2007

This study was carried out to investigate various heavy metal contents in packaging papers by pre-treatments for ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods of heavy metals in this study include extraction, migration and decomposition methods (dry ashing, $HNO_3-HClO_4-HF,\;HNO_3,\;and\;H_2SO_4-HNO_3$). Test results were compared with conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrumental technique. It was considered that the migration test was a better method compared to extraction test, but all the decomposition methods showed much higher detection values than the extraction or migration test. In case of recycled corrugated containers, 3% acetic acid solution extracted about 25% of chromium and 30% of lead compared to the content by decomposition methods. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.465-469
• /
• 2006

Pre-treatment methods to determine various heavy metal contents in packaging papers were investigated by ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods utilized in this study include dry ashing and decomposition methods ($HNO_{3-}HClO_{4-}HF,\;HNO_{3},\;and\;H_{2}SO_{4-}HNO_{3}$). They were compared with the conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrument. In case of Cr and Pb, the migration test is considered to be a better method compared to the extraction test, but all pretreated methods showed much higher detection efficiency than the extraction or migration test. However, the detection ratio between the migration test and decomposition methods was different. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method. Concerning Pb, the sulfuric acid - nitric acid method showed a low detection efficiency compared to other decomposition methods. The sulfuric acid - nitric acid method is, thus, not considered to be a suitable analysis method for Pb in packaging papers.

• 청정기술
• /
• 제7권1호
• /
• pp.13-25
• /
• 2001

정밀 기계산업과 반도체 산업의 진보와 더불어 대상물의 초순도 세정이 하이테크 산업발전에 가장 중요한 핵심기술로 부각되고 있다. 현재 초순수 세정은 크게 습식세정과 건식세정으로 분류하고 있다. 습식세정의 경우 오랜 경험과 높은 세정효율을 보이고 있지만, 다량의 탈이온수에 과산화수소, 황산, 불산 또는 수산화 암모늄 등의 독성첨가제를 반복적으로 사용하고 있어 독성 폐수발생등 심각한 환경오염을 유발하고 있다. 따라서, 최근에는 습식 세정에 따른 환경오염의 문제를 개선하기 위한 노력으로 몇 가지 건식 세정기술이 개발되고 있다. 최근 들어 건식세정 방법 중에 소위 초임계상태의 환경 용매를 사용하는 기술이 개발되고 있으며, 높은 세정효율과 더불어 환경친화성이 높은 유망한 기술로 받아들여지고 있어 국제적인 관심이 집중되고 있다. 이 논문에서는 초임계 이산화탄소 세정에 관심을 두어, 초임계 용매의 물리화학적 특성과 환경친화측면, 세정공정의 엔지니어링, 그리고 국내외 기술 현황을 종합적으로 분석 평가하였다.