• Journal of the Korean Arthroscopy Society
• /
• v.15 no.2
• /
• pp.83-91
• /
• 2011

Purpose: Microfracture has been used as a first-line treatment to repair articular cartilage defects. In this study, a new technique using an extracelluar matrix biomembrane to cover the cartilage lesions after microfracture was evaluated in terms of cartilage repairability and clinical outcome compared with conventional microfracture technique in a prospective randomized trial. Materials and Methods: A total of 53 patients (59 cases) without osteoarthritis who had focal full thickness articular cartilage lesions were randomly assigned in two group. Seventeen patients (17 cases) underwent conventional microfracture procedure (control group) and thirty-six patients (42 cases) received microfracture and placing biomembrane cover (ArtiFilm$^{TM}$) concomitantly (experimental group). Clinical assessment was done through 6 months postoperatively using the subjective International Knee Documentation Committee IKDC questionnaire, and visual analog scale (VAS) for pain and satisfaction. Magnetic resonance imaging (MRI) was performed at 6 months after the operation in all patients. Results: In clinical outcomes, the significant difference was observed between both groups in IKDC, but not in VAS for pain and for satisfaction (final outcomes of IKDC, p=0.001; VAS for pain, p=0.074; VAS for satisfaction, p=0.194). The MRI showed good to complete defect fill (67 to 100%) in 33 patients (78.6%) of experimental group and 4 patients (23.5%) of control group, respectively. In control group, 9 of 17 patients (52.9%) showed poor defect fill (less than 33%), whereas 5 (11.9%) in experimental group (p=0.001). Assessment of peripheral integration revealed no gap formation in 35 patients (83.3%) in experimental group and 6 patients (35.3%) in control group (p=0.001). No serious complications or adverse effects related to the biomembrane were found. Conclusion: Good short-term follow-up clinical results were obtained in the group whose cartilage defects in the knee joint were covered with biomembrane after the microfracture, with the MRI findings confirming the excellent regeneration of the defective cartilage area. This suggests that the surgery to cover the defective area with biomembrane (ArtiFilm$^{TM}$) after the microfracture procedure is a safe, more effective treatment to induce cartilage regeneration.

• The Journal of Society for e-Business Studies
• /
• v.25 no.1
• /
• pp.135-176
• /
• 2020

This study is to investigate the factors affecting the usage intentions of 5G service between 5G service subscribers and non-subscribers based on the Integratively Extended Technology Acceptance Model in the initial B2C 5G service market. We designed the integratively extended technology acceptance model to find the more specific factors to affect the usage intentions by integrating the exogenous factors including the technical factors, the social factors, and the personal factors with the ETAM(Extended Technology Acceptance Model). Referring to the previous studies, we constructed the hypotheses of structural influence relationship from the exogenous factors to the dependent usage intentions factors through the mediating belief factors. We designed the 5G service usage intentions model based on these hypotheses and operational definitions of the factors. Using the analysis of SEM(Structural Equation Model), the proposed model and the hypotheses were empirically tested by the data collected from 245 subscribed respondents and 245 non-subscribed respondents. As a result, the perceived ease of use has an effect on the perceived usefulness and enjoyment, and the perceived usefulness/enjoyment and the personal innovativeness have positive effects on the usage intentions of both groups.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.119-127
• /
• 1991

The protonation and the metal ion complexation of 15 to 18 membered diaza crown ether such as 1,12-diaza-3, 4 : 9, 10-dibenzo-5, 8-dioxacyclopentadecane(NtnOenH$_4$), 1,13-diaza-3,4 : 10,11-dibenzo-hydroxy-5,9-dioxacyclohexadecane(NtnOtnH$_4$), 1,13-diaza-3,4 : 10,11-dibenzo-15-hydroxy-5,9-dioxacyclohexadecane(Ntn(OH)OtnH$_4$), 1,15-diaza-3,4 : 12,13-dibenzo-5,8,11-trioxacycloheptadecane (NenOdienH$_4$) and 1,15-diaza-3,4 : 12,13-dibenzo-5,8,11-trioxacyclooctadecane(NtnOdienH$_4$) were studlied by potentiometry and NMR spectroscopy. The protonation constants were used to predict basicity of crown ethers. The sequence of the basicity was NenOdienH$_4$ < Ntn(OH)OtnH$_4$ < NtnOenH$_4$ < NtnOtnH$_4$ < NtnOdienH$_4$. Changes on the basicity were explained in terms of the effects of substituents and the degree of twistness of the macrocyclic ring. The sequence of the complex stabilities were Co(II) < Ni(II) < Cu(II) < Zn(II) for the transition metal complexes and Cd(II) < pb(II) < Hg(II) for the post-transition metal complexes. These changes on the stabilities were dependent on the basicity of the ligand and cavity size of the ring. For the heavy post-transiton metal complexes and Zn(Ⅱ) complex, the former factor was predominent and for the other transition metal complexes, the latter was affected on the stabilities. $^1$H and $^{13}$C-NMR studies for heavy post-transition metal complexes indicated that the nitrogen atom has greater affinity on metal ions than oxygen atom and the planarity of the rings was losed by the complexation with metal ions.

• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.121-136
• /
• 2000

This study reports on a comparison between the Korean diffusion of agricultural innovation or extension service and the cooperative extension service in the United States of America. It focuses on relevant differences between the two systems and provides recommendation for improvement of the Korean system to insure success in important areas related to the diffusion of agricultural innovations. After a comparative study on diffusion of innovations it is clear that: in order to have a productive agriculture that makes effective and efficient use of natural resources and helps achieve sustainability goals, a mechanism that delivers knowledge to agricultural communities must be established and maintained. This mechanism is clearly an agricultural extension service that is cooperatively funded by federal, state and local governments and that insures participation of constituents in the process of establishing priorities and evaluating achievements. The success of US agriculture, the most productive in the world, is to a large degree to the Cooperative Extension Service. Based on the results of this study and the differences of the United States and Korea, the following recommendations should be emphasized for more effective communication for agricultural innovation and rural development in Korea: 1) In order to insure that extension educators are high caliber professional individuals, it is important to establish a system that nationally recognizes these individuals as such, and that provides a professional development path. 2) The results of the decision of transfer of extension educators to local governments has not yielded positive outcomes, especially in terms of professional status. It is clearly demonstrable that valuable professionals are leaving the service, that local governments do not have the will and resources to implement a successful extension program. 3) Because of the critical importance of diffusing innovations to agricultural producers in order to insure and quality and steady food supply, it is of critical importance that these issues be addressed before the extension service is further deteriorated. Given the cement situation, it is clear that the extension service should become nationally supported again in cooperation with local and state governments and that extension professionals be given appropriate rank at the national level, commesurate with their peers in research and teaching. 4) The common current committee practice of lengthy reporting and short discussion needs to be changed to one that results in char, brief and substantive action oriented goals. Joint participation by researchers, extension educators and farmers should be encouraged in planning, implementation and evaluation of communication for agricultural innovations. Roles and functions of committees for institutional cooperation, and or agricultural extension committees should be enlarged. 5) Extension educators should be encouraged to adopt new communication technologies to improve their diffusion of innovations methods. Agricultural institutions and organizations should be encouraged to adopt farmer-first and or client-oriented approach in agricultural extension and diffusion of agricultural technologies. The number, complexity and rapid change of information in agricultural extension require the development of a computer based information and report system to support agricultural extension. 6) To facilitate and expand the further development of communication for agricultural innovation and rural development, agricultural communication programs in universities especially in colleges of agriculture and life sciences. 7) To strengthening the sense of national and social responsibility communication for agricultural innovation and rural development among students in agricultural colleges and universities through participation in learning activities by proactive recruitment. 8) To establish and reinforce a policy that insures participation in communication for agricultural innovation and regal development activities. 9) To improve further development of communication for agricultural innovation and rural development in Korea, more research activities should be encouraged.

• Management & Information Systems Review
• /
• v.31 no.2
• /
• pp.41-59
• /
• 2012

ERP is a new technique of process innovation. It indicates enterprise resource planning whose purpose is an integrated total management of enterprise resources. ERP can be also seen as one of the latest management systems that organically connects by using computers all business processes including marketing, production and delivery and control those processes on a real-time basis. Currently, however, it's not easy for local enterprises to have operators who will be in charge of ERP programs, even if they want to introduce the resource management system. This suggests that it's urgently needed to train such operators through ERP education at school. But in the field of education, actually, the lack of professional ERP instructors and less effective learning programs for industrial applications of ERP are obstacles to bringing up ERP workers who are competent as much as required by enterprises. In ERP, accounting is more important than any others. Accountants are assuming more and more roles in ERP. Thus, there's a rapidly increasing demand for experts in ERP accounting. This study examined previous researches and literature concerning ERP education, identified problems with current ERP education at college and proposed how to solve the problems. This study proposed the ways of improving ERP education at college as follows. First, a prerequisite learning of ERP, that is, educating the principle of accounting should be intensified to make students get a basic theoretical knowledge of ERP enough. Second, lots of different scenarios designed to try ERP programs in business should be created. In association, students should be educated to get a better understanding of incidents or events taken place in those scenarios and apply it to trying ERP for themselves. Third, as mentioned earlier, ERP is a system that integrates all enterprise resources such as marketing, procurement, personnel management, remuneration and production under the framework of accounting. It should be noted that under ERP, business activities are organically connected with accounting modules. More importantly, those modules should be recognized not individually, but as parts comprising a whole flow of accounting. This study has a limitation because it is a literature research that heavily relied on previous studies, publications and reports. This suggests the need to compare the efficiency of ERP education between before and after applying what this study proposed to improve that education. Also, it's needed to determine students' and professors' perceived effectiveness of current ERP education and compare and analyze the difference in that perception between the two groups.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.389-397
• /
• 2019

Lysosomes are cellular organelles involved in energy metabolism and intracellular digestion in eukaryotic cells, including protease, nuclease, glycosidase, lipase, and phosphatase. Our previous studies have confirmed that egg white lysosomes had melanin decolorization and reduction activity. However, there have been few studies on skin barrier and skin regeneration as well as inhibition of melanin production by egg white lysosomes on B16F10 melanocyte cell line. In this study, we attempted to identify the effect of lysosome-related organelle extract (LOE) extracted from egg white on the melanin content change and skin barrier enhancement in cells. First, cytotoxicity evaluation was performed on B16F10 melanocyte cell line to confirm the whitening efficacy of LOE. Cytotoxicity by LOE was not observed at 20 mg/mL concentration, but cytotoxicity was observed at 40 mg/mL, and the maximum concentration value was set to 20 mg/mL in all subsequent experiments. LOE samples of 5, 10, 20 mg/mL inhibited melanin production by 61.5 ± 4.0%, 61.4 ± 7.3%, 58.3 ± 8.3%, respectivly, compared to α-MSH, a negative control in melanin contents assay. MITF mRNA expression was reduced by about 39.7 ± 3.2% compared to the α-MSH treatment group. TEER assay using HaCaT showed that LOE increased TEER resistance in a dose-dependent manner, indicating that LOE is involved in strengthening the skin barrier. LOE also increased the TEER resistance under TNF-α treatment. Skin barrier was normally restored by LOE even under the condition of inflammation. LOE had a positive effect on cell division and cell migration promotion, confirmed by the observing the effect of promoting cell migration by LOE through cell migration assay. Taken together, we expect that LOE can be developed as a cosmetic material to enhance has effects on skin regeneration and skin barrier strengthening as well as whitening function if enzyme stabilization and formulation technology are combined.

• Hwankyungkyoyuk
• /
• v.7 no.1
• /
• pp.46-87
• /
• 1994

Our country has been consuming a huge amount of energy in the course of industrialization and its demand is expected to increase enormously in the future. However, the deposits of energy resources are so limited that the settlement of energy problem comes up the essential subject. To solve the energy problem, it is requested that new resources to gain energy stably should be developed and also energy should be economized and used effectively. The effective use of energy and an the wisdom of economy in energy are requested to everybody and these things should be habitualized from very young age through education. Nevertheless, almost every school in our country hasn’t been concerned about energy education. Even though they have a concern, they are very short of the energy education materials and the quality of the materials is not so good. Therefore it is very meaningful to the settlement of energy problem of the country to make the students who will lead our country to make the students who will lead our country in the future realize the seriousness of energy problem and to provide them the necessary knowledge and methods to solve this problem so that they practice those things in everyday life. Having these necessities, this research, supported by The Korea Energy Management Corporation(KEMCO), was performed for 8 months from April 17, 1994 to December 17, 1994. Many peoples participated in this study such as 30 staffs of researchers and authors, 5 staffs of photographers and illustrators, and 3 VCR program producers developing an energy education material set for middle school students that includes a printed material for student, a diskette for computer simulation, a teacher's guidebook, VCR material and its guidebook. The following main development direction was established : First, the material for student should be consisted of units that let students know the seriousness of energy problem. Second, the focus should be put on the necessary method and practice to economize energy actually in real life based on the basic knowledge learned in elementary school. Third, material for student should be consisted of modules to be student activity-oriented teaching-learning rather than lecture-oriented one. The activity, to maximize student's interests, should be presented in various forms such as experiments, investigation, play, data interpretation, computer simulation, visits, expression and appreciation, etc. To develop the energy education materials for middle school students, a research plan was made first. After literature review about domestic and foreign energy education materials, several research trips home and abroad, and discussion meetings, the basic theory of energy education such as the principle, objective, contents, teaching-learning method, and evaluation method was established. Material for student was developed through the following procedures : The activities in the existing energy education materials were analysed and were divided into four categories related to energy using places of home, school, community, and country, and which were again divided into three categories related to time of past, present, and future, Considering these division, nine modules which are structure units of material for student were chosen, Each module comprises 2-4 activities. Totally 31 activities were designed in this way. The syllabi were made out for each activity and writing was asked for to experts related to each activity after several discussions and revision. To complement the draft, another several discussions and revision were also made on it and then pictures and illustrations were asked for. All these procedures complete the material for student, titled ; Energy Inquiry of Middle School Students', which totals 129 pages and is all in color. As the manuscript of material for student was fixed, writing for teacher's guidebook was asked for to the same writers. The draft of teacher's guidebook was also complemented through the several concentrated works and discussions. Teacher's guidebook focused on the teaching-learning principle and methods of energy education and on the concrete instruction cases for effective instruction of material for student. It is organized with two parts : the one is 'general outline' which introduces theoretical contents and the other is 'details' which are practically helpful to teaching-learning. It is totally 131 pages including both 'general outline' and 'details'. The VCR material and its guidebook consist of contents that cultivate the good attitude trying to economize energy and raise student's interests with a purpose of strong motivation to recognize the necessity of economy and practice it. After establishing development direction of VCR material through discussion meetings and research trips, its script was made by relevant experts. Then the script was also reviewed two times. The drafted VCR material made by a video material developing expert was examined and modified by previews twice. After completion of VCR material, the VCR guidebook was made. All these procedures led to the development of VCR material which runs 20 minutes in VHS type. The VCR guidebook shows a production purpose of the program, structure of contents, evaluation methods, and contents of the program in detail to give help to instructors when they use this VCR material, When these energy education materials are used, it is desirable that the VCR material should be presented first to induce student's motive, and then material for student is introduced Since the material for student is composed of activity-oriented modules and each module is independent one another in general, and each activity is, too. the necessary module or activity can be chosen and utilized in any order according to school or class conditions. This energy education materials will contribute to the development of student's ability to solve energy problem in everyday life and teacher's ability to teach the fundamental knowledge and method in solving energy problem.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.199-205
• /
• 1998

Cullet Quality Control in auto glass bottle factory is the most important in recent days because of the increasing cost of materials in glass bottle. Since the composition of plate glass cullet is similar, the cullet quality using plate cullet in glass bottle factory is easily controlled. In addition to this, the price of plate glass cullet is so low that the cost reduction can be achieved. If the ratio of plate glass cullet and gush is over 25%, the liquidity of glass water become worse, which is caused by different compositions and viscosity of the components. As a results, Furnace bottom temperature becomes low and glass water becomes inhomogeneous. Thus production efficiency of glass bottle becomes low because of increasing devitrification in Dead Corner part in glass melting furnace. Three experimental methods – (1) increasing melting temperature, (2) using Booster, (3) using bubbler – were performed to increase the furnace bottom temperature and glass water homogeneity. The amounts of plate glass cullet was able to increase up to 90%, 70% and 60% without any devitrification using booster, bubbler and the method of glass melting temperature increase from $1480^{\circ}C$ to $1560^{\circ}C$ respectively. It is not possible to increase the glass melting temperature without the reduction of furnace operation time and the increase of fuel cost. The booster process has disadvantage of much electric energy consumption. Since the bubbler process uses physical convection of melting glass based on compression air, the homogeneity of molten glass is not so good as that of booster process but it can reduce the cost of glass bottle.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.137-142
• /
• 1997

At the tailings dam of the disused Brukunga pyrite mine in South Australia, reaction of groundwater with the tailings causes the formation and discharge of sulphuric acid. There is a need to improve remediation efforts by decreasing groundwater flow through the tailings dam. Geophysical methods have been investigated to determine whether they can be used to characterise variations in depth to watertable and map preferred groundwater flow paths. Three methods were used: transient electromagnetic (TEM) soundings, direct current (DC) soundings and profiling, and self potential (SP) profiling. The profiling methods were used to map the areal extent of a given response, while soundings was used to determine the variation in response with depth. The results of the geophysical surveys show that the voltages measured with SP profiling are small and it is hard to determine any preferred channels of groundwater flow from SP data alone. Results obtained from TEM and DC soundings, show that the DC method is useful for determining layer boundaries at shallow depths (less than about 10 m), while the TEM method can resolve deeper structures. Joint use of TEM and DC data gives a more complete and accurate geoelectric section. The TEM and DC measurements have enabled accurate determination of depth to groundwater. For soundings centred at piezometers, this depth is consistent with the measured watertable level in the corresponding piezometer. A map of the watertable level produced from all the TEM and DC soundings at the site shows that the shallowest level is at a depth of about 1 m, and occurs at the southeast of the site, while the deepest watertable level (about 17 m) occurs at the northwest part of the site. The results indicate that a possible source of groundwater occurs at the southeast area of the dam, and the aquifer thickness varies between 6 and 13 m. A map of the variation of resistivity of the aquifer has also been produced from the TEM and DC data. This map shows that the least resistive (i.e., most conductive) section of the aquifer occurs in the northeast of the site, while the most resistive part of the aquifer occurs in the southeast. These results are interpreted to indicate a source of fresh (resistive) groundwater in the southeast of the site, with a possible further source of conductive groundwater in the northeast.