• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.277-278
• /
• 2008

Orthorhombic $LiMnO_2$(o-$LiMnO_2$) has attracted public attentions as a cathode materials of Lithium ion battery because it has low cost and high theoretical discharge capacity of 285mAh $g^{-1}$. In our study, o-$LiMnO_2$ is synthesized by quenching method. To verify their phase structure, X-ray diffraction is accomplished. Test cells are assembled to check electrochemical characteristics using acquired o-$LiMnO_2$ cathode and carbon anode. Charge/Discharge cycling was carried out for 50cycles. And impedance was measured at 1, 2, 5, 10, 30, 50cycle. During cycle test, the max discharge capacity was recorded 139mAh $g^{-1}$ at 10cycle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.427-430
• /
• 1992

In this paper, we proposed an algorithm for the musical note recognition. Firstly, a given bit-mapped music score image is converted to a set of individual note pattern images via vertical projection. Then, the pitch of a note is determinal by comparison in the note-head position with the reference five-lines. Also, the length of a note is found via leader clustering with a set of normalized note patterns. Finally, a datafile to play the music is obtained using the pitch and length of musical notes. Experimental results with a simple musical score image show that the proposed scheme is performed well.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.105-110
• /
• 2004

방사선 투시조영 촬영 시 사용되는 방호복의 차폐효율 증가와 경량화는 오랜 시간 연구 대상이 되었다. 이러한 방호복의 질적 향상을 위하여 연구한 결과는 다음과 같다. Apron의 규격인 납 당량 0.25mm에 해당하는 투과선량은 5.2%로 나타났으며, 시료 Sn, Ni, Ti, Cu의 방사선 차폐 효율은 Sn이 가장 높게 나타났다. 증착시료 Sn+Pb 방법에서는 Sn 0.18mm와 Pb 0.1mm, Pb+Sn 방법에서는 Pb 0.1mm와 Sn 0.36mm에서 Apron의 규격인 납 0.25mm 두께로 나타났다. 증착시료 Sn+Pb는 Apron의 규격인 0.25mm 납 당량보다 차폐효율이 높고, 면적당 무게가 가벼워 방호복 물질로 적합한 것으로 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.128-131
• /
• 1992

In this paper, the skewness properties of partial discharge at interface layer in mica-epoxy composite material were investigated and studied on interface specimens which has internal electrodes. As a result, it has been confirmed that the interface exists as abnormal resin layer and the contact condition at the interface is depended upon the density of si lane aqueous solution. The Pulse frequency of discharge at abnormal interface has been shown a linear increasing with enlargement of discharge quantity according to rising of the applied voltage. Whereas, in case of normal interface, pulse frequency represented exponential increasing at the saturating point of discharge quantity. The aging model can be represented from the variable characteristics of skewness.

• 한국균학회지
• /
• 제14권4호
• /
• pp.253-256
• /
• 1986

fusarium속(屬)에 속하는 3 종(種)인 F. solani, F. moniliforme, F.cocophilum을 실험재료로 하여 그들의 균사내(菌絲內)에서 일어나는 핵분열(核分裂)을 관찰하고, 그들의 염색체수(染色體數)를 확인하였다. Fusarium속(屬)의 핵분열(核分裂)은 생장(生長)하고 있는 끝부분(hyp-hal tip)에서 좀 더 관찰이 잘 되었고 염색체(染色體)의 형태(形態)는 대체로 점(點)(dot)모양이었으며, 확인한 염색체(染色體)의 수(數)는 F. solani는 n=8, F. moniforme는 8, F. cocophilum은 n=6개였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.934-937
• /
• 1998

Charge/discharge property of LiMn2O4 was investigated with LiMn2O4/Li cell for use of lithium ion battery in electric vehicle. LiMn2O4 calcined at $800^{\circ}C$ for 36hr show high charge/discharge capacity and excellent cycle stability than that of others. This is found to be in agreement with expectation in the X-ray diffraction analysis. In addition, the kind and volume of conductive agent involved in LiMn2O4 cathode is excellent at super-s-black and 20wt%, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.736-739
• /
• 2002

We report on white light emission from a light emitting diode(LED) prepared by blending a red emitting copolymer, m-SiPh PPV-co-MEH PPV, and a blue emitting polyvinylcarbazole (PVK). White light emission was realized when the weight ratio of the m-SiPh PPV-co-MEH PPV : PVK equals to 1 : 30, in which the commission Internationale de L'Eclairage coordinates were x=0.3266 and y=0.3438.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.137-140
• /
• 2001

To improve structural properties and induce higher conductivity, we have annealed emitting layer. The temperature condition was investigated by various experiment. To observe the surface morphology of emitting layer, measured the AFM and the X -ray diffraction pattern of P3HT film is shown. It is move to slightly low angles and diffraction peaks also become much sharper. After annealing of emitting layer, EL intensity and Voltage-current-luminance curve is better as compared with untreated. But PL intensity was decreased. It is known that by emission principal. After annealing of emitting layer, EL devices enhances the interface adhesion between the emissive polymer and Indium-tin-oxide electrode, which takes a critical role to improve the emitting properties of EL devices.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.1679-1682
• /
• 2005

최근 SoC를 포함하는 대부분의 임베디드시스템에서는 RTOS가 선택이 아닌 필수적인 구성요소가 됨에 따라 SoC 개발의 초기단계에서부터 RTOS를 도입하는 것이 바람직하다. 하지만, 기존의 범용 RTOS가 제공하는 기능은 대부분 응용 소프트웨어의 개발과 수행을 위한 것으로 SoC 개발 및 검증에는 적합하지 않은 문제점을 가지고 있다. 본 연구에서는 SoC 개발을 위해 운영체제가 만족시켜야할 요구사항을 제시하고, 소프트웨어의 재사용성과 SoC의 검증을 함께 지원하는 VPOS(Verification-Purpose OS)를 개발하였다. VPOS는 초경량의 단순한 계층적 구조(layered structure)를 가지는 RTOS로서 소프트웨어 재사용을 위해 POSIX 표준 API, 유닉스 호환 디바이스 드라이버 인터페이스, HAL 등을 제공한다. 또한 SoC 설계의 검증을 위해 RT 수준의 통합시뮬레이션에 적합한 커널 구조 및 최적화된 코드, 하드웨어 테스트를 위한 쉘 명령어, 응용 소프트웨어의 디버깅을 위한 KREM(kernel resource and event monitoring) 등의 특징을 함께 제공한다.