• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.519-521
• /
• 2022

본 논문에서는 교통약자들의 이동제한 및 한계와 코로나 19로 인한 관광산업의 손실을 해결할 VR/360도 가상현실을 통한 웹 플랫폼 개발을 제안한다. 이 연구는 활용될 자원인 계절과 날씨자료를 효율적으로 촬영 및 준비하여 기존의 VR/360도의 가상현실을 최대화하고, 기존의 로드뷰 API 및 VR기기의 응용을 다양화한다. 또한, 이 연구는 '관광지를 방문한다'라는 개념을 실외뿐만이 아니라 실내에서도 사실적으로 체험할 수 있음을 제시한다. 이때 사실적인 체험을 더욱 극대화하기 위하여 VR/360도에 접목된 계절과 날씨의 콘텐츠를 구매할 수 있게 하여 소비자에게 선택지 내에서의 다양성을 주고, 단순 체험이 아닌 관광산업의 경제적 이윤으로 연결한다. 본 논문에서는 예상결과를 통하여 기존의 단순 VR/360도 체험을 통한 가상현실에 비해 좀 더 다양한 환경 조성을 통한 콘텐츠와 관광산업의 개선 및 경제성 면에서 발전성을 보인다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.263-264
• /
• 2023

오늘날 출산율 감소와 의료기술 등의 발달에 따라 고령화 사회 현상이 급부상하고 있으며, 이 비율은 계속 증가할 것이다. 또한 노인 인구가 많아지는 만큼 노안을 가진 사람들도 많아진다. 고령화 사회가 지속되는 만큼 고령층이 이용할 수 있는 디지털 기기 또한 많아져야 하지만 그렇지 않다. 그중에 하나인 ATM은 고령층을 제외한 고객들은 모바일뱅킹과 같은 서비스를 이용하고 고령층이 주로 ATM을 이용한다. 주요 고객인 고령층이 사용하는 ATM이지만 고령층을 배려한 ATM은 찾아보기 힘들다. 이에 본 논문에서는 딥러닝 모델을 이용하여 노안을 갖고 있거나 고령층이라는 것을 나이로 판단하여 고령층과 일반적인 노안을 갖는 연령층이 보다 쉽게 ATM을 이용 할 수 있는 선택적 ATM UI 간편화 시스템을 구축하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.113-114
• /
• 2023

가정용 생활 쓰레기 수거 작업은 야간이나 이른 새벽에 이루어지고 있어 환경미화원의 안전사고와 수거 차량으로 인한 소음 문제가 빈번하게 발생한다. 본 논문에서는 딥러닝 기반의 영상 인식을 활용하여 종량제 봉투를 인식하고 수거가 가능한 생활 쓰레기 수거 로봇의 설계를 제시한다. 제시하는 생활 쓰레기 수거 로봇은 지정 구역을 자율주행하며 로봇에 장착된 카메라를 이용해 학습된 모델을 기반으로 가정용 쓰레기 종량제 봉투를 검출한다. 이를 통해 처리 대상으로 지정된 종량제 봉투와 로봇 팔 사이의 거리를 카메라를 활용하여 얻은 깊이 정보와 2차원 좌표를 토대로 목표 위치를 예측해 로봇 팔의 관절을 제어하여 봉투를 수거한다. 해당 로봇은 생활 쓰레기 수거 작업 과정에서 환경미화원을 보조하여 미화원의 안전 확보와 소음 저감을 위한 기기로 활용될 수 있다.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.152-158
• /
• 2016

Nitrogen oxide is generated by the chemical reaction of oxygen and nitrogen in higher temperature environment of combustion facilities. The NOx reduction equipment is generally used in the power plant or incineration plant and it causes enormous cost for the construction and maintenance. The flue gas recirculation method is commonly adopted for the reduction of NOx formation in the combustion facilities. In the present study, the computational fluid dynamic analysis was accomplished to elucidated the cold flow characteristics in the flue gas recirculation burner with coanda nozzles in the flue gas recirculation pipe. The inlet and outlet of flue gas recirculation pipes are directed toward the tangential direction of circular burner not toward the center of burner. The swirling flow is formed in the burner and it causes the reverse flow in the burner. The ratio of flue gas recirculation flow rate with the air flow rate was about 2.5 for the case with the coanda nozzle gap, 0.5mm and it was 1.5 for the case with the gap, 1.0mm. With the same coanda nozzle gap, the flue gas recirculation flow rate ratio had a little increase when the air flow rate changes from 1.1 to 2.2 times of ideal air flow rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7071-7077
• /
• 2015

In recently, the demand of cover-glass is increased because smart phone, tablet pc, and electrical device has become widely used. The display of mobile device is enlarged, so it is necessary to have a high strength against the external force such as contact or falling. In fabrication process of cover-glass, a grinding process is very important process to obtain high strength of glass. Conventional grinding process using a grinding wheel is caused such as a scratch, chipping, notch, and micro-crack on a surface. In this paper, polishing system using a abrasive film was developed for a grinding of mobile cover-glass. To evaluate structural stability of the designed system, finite element model of the polishing system is generated, and multi-body dynamic analysis of abrasive film polishing machine is proposed. As a result of the analysis, stress and displacement analysis of abrasive film polishing system are performed, and using laser displacement sensor, structural stability of abrasive film polishing system is confirmed by measuring displacement.

• The Journal of Society for e-Business Studies
• /
• v.16 no.4
• /
• pp.197-220
• /
• 2011

The smartphone is simply beyond the means of communication equipment, to line up the turning point of mobile convergence, is recognized as a service tool of new concept the camera, game, multimedia function, digital multimedia broadcasting, mobile internet etc, that use of smartphone is working toward developed a variety and new business models. The study is empirically studied casualties that self-determination influences flow and satisfaction which is intrinsic motivation of smartphone. There are many studies on flow, is intrinsic motivation, influencing satisfaction and Loyalty, but there are little studies which variables influences flow. this study is explore causality of autonomy, competence, relatedness which are major variables of self-determination theory that studied factors effecting intrinsic motivation influencing flow and satisfaction. This study developed a research model to explain the use of smartphone, and collected 670 survey responses from the office workers of seoul S company who had experiences with such smartphone. To prove the validity of the proposed research model, SEM analysis is applied with valid 670 questionnaires. The results, firstly, autonomy positively influences flow. secondly, competence significantly influences flow. thirdly, relatedness significantly influenced flow. also, upper above results shows that flow influences satisfaction.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.634-639
• /
• 2013

The use of medical imaging has been increased for diagnosis of cancer or vessel disease. Among the medical imaging, computed tomography (CT) is one of the popular methods, however, which should need administration of contrast medium. Therefore, we developed gold coated liposomes (GCL) as a contrast medium. To coat gold on the liposomal surface, positive charged liposomes was prepared and then negative $Au^-$ can coat on the liposomal surface by electronic interaction. The size of GCL was $154.8{\pm}9.2$ nm and surface charge was $27{\pm}3.2$ mV, respectively. The morphology of GCL was confirmed by electron microscopy (SEM) and transmission electron microscopy (TEM). The coating efficiency of gold was 18%. Chemical procedure for gold coating on liposomal surface was not toxic for cell cytotoxicity by MTT assay. Finally, we demonstrated attractive CT image for GCL. Taken together, the GCL would be useful for various vessel related disease as a contrast medium.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.57-64
• /
• 2007

This study proposes a method to estimate drilling torque during ground boring with an aid of electrical energy required for rotating a boring-auger. Ground boring is commonly used in geotechnical engineering such as preboring precast pile installation, soil-cement grouting, ground exploration and so forth. In order to understand the correlation between required electrical energy to rotate the boring auger and the drilling torque, a small laboratory apparatus was designed and a pilot study was performed. The apparatus rotates common drill bits of $D=5{\sim}25mm$ in CBR specimens. The velocity of a bit is 19 RPM and predefined using a reduction gear which connects a main rotation axis to a 25 Watts AC electrical motor shaft. In the middle of drilling the motor current increments and the drilling torque were measured and the correlation between the current and the torque was obtained through linear square fits. Based on the correlation the acquired motor current during drilling was applied to predict the drilling torque in consequent testing and the prediction results were compared to the measured torque. The comparison leads a conclusion that the motor current during drilling using electrical power may be a good indicator to estimate/determine strength characteristics of the ground.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.140-147
• /
• 2016

A process for manufacturing virally-safe porcine bone hydroxyapatite (HA) has been developed to serve as advanced xenograft material for dental applications. Porcine bone pieces were defatted with successive treatments of 30% hydrogen peroxide and 80% ethyl alcohol. The defatted porcine bone pieces were heat-treated in an oxygen atmosphere box furnace at $1,300^{\circ}C$ to remove collagen and organic compounds. The bone pieces were ground with a grinder and then the bone powder was sterilized by gamma irradiation. Morphological characteristics such as SEM (Scanning Electron Microscopy) and TEM (Transmission Electron Microscopy) images of the resulting porcine bone HA (THE Graft$^{(R)}$) were similar to those of a commercial bovine bone HA (Bio-Oss$^{(R)}$). In order to evaluate the efficacy of $1,300^{\circ}C$ heat treatment and gamma irradiation at a dose of 25 kGy for the inactivation of porcine viruses during the manufacture of porcine bone HA, a variety of experimental porcine viruses including transmissible gastroenteritis virus (TGEV), pseudorabies virus (PRV), porcine rotavirus (PRoV), and porcine parvovirus (PPV) were chosen. TGEV, PRV, PRoV, and PPV were completely inactivated to undetectable levels during the $1,300^{\circ}C$ heat treatment. The mean log reduction factors achieved were $${\geq_-}4.65$$ for TGEV, $${\geq_-}5.81$$ for PRV, $${\geq_-}6.28$$ for PRoV, and $${\geq_-}5.21$$ for PPV. Gamma irradiation was also very effective at inactivating the viruses. TGEV, PRV, PRoV, and PPV were completely inactivated to undetectable levels during the gamma irradiation. The mean log reduction factors achieved were $${\geq_-}4.65$$ for TGEV, $${\geq_-}5.87$$ for PRV, $${\geq_-}6.05$$ for PRoV, and $${\geq_-}4.89$$ for PPV. The cumulative log reduction factors achieved using the two different virus inactivation processes were $${\geq_-}9.30$$ for TGEV, $${\geq_-}11.68$$ for PRV, $${\geq_-}12.33$$ for PRoV, and $${\geq_-}10.10$$ for PPV. These results indicate that the manufacturing process for porcine bone HA from porcine-bone material has sufficient virus-reducing capacity to achieve a high margin of virus safety.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.135-144
• /
• 2007

The dried barks of Maackia amurensis were ground, extracted with 95% EtOH, concentrated, and fractionated with a series of light petroleum ether, dichloromethane, ethyl acetate and water on a separatory funnel. Each fraction was concentrated, then a portion of dichloromethane and ethyl acetate soluble was chromatographed on a Sephadex LH-20 and silica gel 60 column using a various solvent system as eluents. The isolated compounds were identified by cellulose TLC, $^1H-$, $^{13}C-NMR$, COSY, NOESY, HMQC, HMBC, FAB and EI-MS. The structures were determined as: 7-O-$\beta$-D-glucopyranosyl-4'-methoxyisoflavone, 7-O-$\beta$-glucopyranosyl(1'''->6'')-$\beta$-D-glucopyranosyl-4'-methoxyisoflavone, 7-O-$\beta$-D-glucopyranosyl(1''''->6''')-$\beta$-D-glucopyranosyl(1'''->6'')-$\beta$-D-glucopyransoyl-4'-methoxyisoflavone, 7-O-$\beta$-D-glucopyranosyl-4', 6-dimethoxyisoflavone. The Free radical scavenging activity using DPPH of the isolated compounds were similar with that of BHT but lower than of $\alpha$-tocopherol.