• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.506-510
• /
• 1995

The 5-(2'-(N-(1-methyl-3'-carbamylphenyl)-n-propyl))aminoethyl)-8- hydroxy-4-methyl-carbostyril derivatives which have isoelectronic and isosteric structural similarity with dobutamine without having the Catechol-O-Methyltransferase (COMT) vulnerable m-hydroxy group were synthesized via 7 synthetic steps, and their stabilities in phosphate buffer solution(pH=7.4), human blood. 80% human plasma and 20% rat liver homogenate were determined in vitro condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4101-4106
• /
• 2011

In this study, we propose that the structures of 2-layer spiral planar inductors have a lower spiral coil and via increasing inductance in limited possession are and confirm the frequency characteristics. The structures of inductors have Si thickness of $300{\mu}m$, $SiO_2$ thickness of $7{\mu}m$. The width of Cu coils and the space between segments have $20{\mu}m$, respectively. The number of turns of coils have 3. The performance of spiral planar inductors was simulated to frequency characteristics for inductance, quality-factor, SRF(Self- Resonance Frequency) using HFSS. The 2-layer spiral planar inductors have inductance of 3.2nH over the frequency range of 0.8 to 1.8 GHz, quality-factor of maximum 8.2 at 2.5 GHz, SRF of 5.8 GHz. Otherwise, 1-layer spiral planar inductors have inductance of 1.5nH over the frequency range of 0.8 to 1.8 GHz, quality-factor of maximum 18 at 8 GHz, SRF of 19.2 GHz.

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.338-342
• /
• 1987

8-tert-Butyl-6,7-dihydro-5-methyl-8H-pyrrolo [3,2-e]-s-triazolo [1,5-a] pyrimidine (Bumepidil), one of the s-triazolo [1,5-a] pyrimidine derivatives, has been recently found to be the most promising potential coronary vasodilator and antihypertensive agent. In this report, a new synthetic approach for Bumepidil, via direct N-amination of amino pyrimidine intermediate, was studied and found to be useful method. The novel synthetic method comprise the following steps, acylation of $\gamma$-butyrolactone, condensation with guanidine, direct N-amination, cyclization, chlorination, and finally cyclization using tert-butyl amine.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.874-879
• /
• 1995

Magnetic properties of FeMoN, FeMoTaN, FeTaN and FeTaC films deposited by DC magnetron reactive sputter were investigated, and correlated with their microstructure. FeMoN films were not showen the soft magnetic prop¬erties, because of generated $Fe_{2}Mo$, $Fe_{3-2}N$ and $Fe_{4}N$ phases. Ta added films, however, effectivly retarded the $\alpha$-Fe grain growth and suppressed the generation of Fe nitrides or carbides during heat treatement. The soft magnetic properties of $B_{s}:15\;kG,\;H_{e}:0.25\;Oe,\;\mu':4000(at\;5\;MHz),\;and\;B_s:14.5\;kG,\;He:0.25\;Oe,\;\mu':2700(5MHz)$ were observed in $Fe_{78.8} Ta_{8.5}N_{12.7}\;and\;Fe{75.6}Ta_{8.1}C_{16.3}$ films, respectively.

• YAKHAK HOEJI
• /
• v.41 no.5
• /
• pp.658-665
• /
• 1997

Identification of a soil microorganism strain X-8, producer of ${\beta}$-lactamase inhibitor, based on its morphological, physiological, biochemical and chemotaxonomical characteristics was performed. The strain X-8 was identified as Pseudomonas sp. The beta-lactamase inhibitor produced by this strain was highly achieved in fermentation medium contained glucose 0.5%, urea 0.25%, $K_2HPO_4{\cdot}3H_2O\;0.5%,\;MgSO_4{\cdot}7H_2O\;0.5%,\;FeSO_4{\cdot}7H_2O\;0.01%,\;CuSO_4,\;ZnSO_4,\;MnSO_4\;0.02%$. The beta-lactamase inhibitor was not extracted by organic solvent such as n-butanol and ethyl acetate but remained in aqueous layer. The n-butanol extract showed antimicrobial activity against M. smegmatis. The ${\beta}$-lactamase inhibitor was stable at pH 7.0~8.0 and 4$^{\circ}C$ for 24h. The ${\beta}$-lactamase inhibitor was bound on ion exchanger Diaion WA-30 and HP-20 and eluted with 2N-$NH_4OH$ and acetone, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.317-322
• /
• 2016

While PFOS sodium salt ($C_8F_{17}SO_3Na$) was not degraded by microorganisms for 28 days, the 4 alternatives were biodegraded at the rates of 21.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.5% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.8% for $C_{23}F_{18}H_{28}S_2O_8Na_2$ and 6.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, respectively. The acute toxicity test using Daphnia magna was conducted for 48 hours, the half effective concentration ($EC_{50}$) of PFOS sodium salt ($C_8F_{17}SO_3Na$) was evaluated in 54.5 mg/L. While the 4 alternatives did not show any effect at 500.0 mg/L. The surface tension of the PFOS salt ($C_8F_{17}SO_3Na$) is 46.2 mN/m at a concentration of 500.0 mg/L. While the surface tension of the 4 alternatives was found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$). The surface tension of $C_{23}F_{18}H_{28}S_2O_8Na_2$ (20.9 mN/m) has the lowest, followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.4 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.3 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.2 mN/m). The four kinds of alternatives ($C_{15}F_9H_{21}S_2O_8Na_2$, $C_{17}F_9H_{25}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, $C_{25}F_{17}H_{32}S_3O_{13}Na_3$) were found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$) in terms of biodegradation, Daphnia sp. acute toxicity and surface tension, and thus they were considered applicable as PFOS alternatives. Especially biodegradation rate of $C_{15}F_9H_{21}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ was relatively high as 15.8~21.6%, and Daphnia sp. acute toxicity and surface tension were considerably superior (surface tension 39~55%) to PFOS sodium salt. Therefore, these alternatives are considered to be available as an alternative of PFOS.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.188-194
• /
• 1995

This study was carried out to investigate the effect of NH$_4$H$_2$PO$_4$ on pH stabilization in deep flow culture system using tap water, and to determine the optimum range of NH$_4$H$_2$PO$_4$ in culture solution. The pH of tap water is 7.5. The higher the concentration of NH$_4$H$_2$PO$_4$ was, the more the pH of nutrient solution was decreased. In NH$_4$H$_2$PO$_4$ 4/3-5/3 me/$\ell$, the pH of nutrient solution was 6-7.5 during the experiment. The highest brix(%) was obtained in NH$_4$H$_2$PO$_4$ 5/3-6/3 me/$\ell$. Leaf length, leaf width and stem-base diameter were highest in NH$_4$H$_2$PO$_4$ 2/3 me/$\ell$. The L and b＊ values were highest and the a＊ value was lowest in NH$_4$H$_2$PO$_4$ 8/3 me/$\ell$. Toxicity symptom of ammonium appeared in NH$_4$H$_2$PO$_4$ 8/3 me/$\ell$. It suggests that there was the relationship between leaf color and growth condition. It was concluded that NH$_4$H$_2$PO$_4$ 2/3 me/$\ell$ was good before harvest stage and NH$_4$H$_2$PO$_4$ 5/3-6/3 me/$\ell$ at harvest stage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.576-581
• /
• 2005

In this paper. the a-Si:H TFT using ferroelectric of $SrTiO_3$ as a gate insulator is fabricated on glass. High k gate dielectric is required for on-current, threshold voltage and breakdown characteristics of TFT Dielectric characteristics of ferroelectric are superior to $SiO_2$ and $Si_3N_4$. Ferroelectric increases on-current and decreases threshold voltage of TFT and also ran improve breakdown characteristics.$SrTiO_4$ thin film is deposited by e-beam evaporation. Deposited films are annealed for 1 hour in N2 ambient at $150^{\circ}C\~600^{\circ}C$. Dielectric constant of ferroelectric is about 60-100 and breakdown field is about IMV/cm. In this paper, the TFT using ferroelectric consisted of double layer gate insulator to minimize the leakage current. a-SiN:H, a-Si:H (n-type a-Si:H) are deposited onto $SrTiO_3$ film to make MFNS(Metal/ferroelectric/a-SiN:H/a-Si:H) by PECVD. In this paper, TFR using ferroelectric has channel length of$8~20{\mu}m$ and channel width of $80~200{\mu}m$. And it shows that drain current is $3.4{\mu}A$at 20 gate voltage, $I_{on}/I_{off}$ is a ratio of $10^5\~10^8,\;and\;V_{th}$ is$4\~5\;volts$, respectively. In the case of TFT without having ferroelectric, it indicates that the drain current is $1.5{\mu}A$ at 20gate voltage and $V_{th}$ is $5\~6$ volts. If properties of the ferroelectric thin film are improved, the performance of TFT using this ferroelectric thin film can be advanced.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.913-920
• /
• 2007

Hydrochloride acid salts of new $N_2O_2$ tetradentate ligands containing amine and phenol N,N'-bis(2-hydroxybenzyl)-o-phenylenediamine(H-BHP), N,N'-bis(5-bromo-2-hydroxybenzyl)-o-phenylenediamine(Br-BHP), N,N'-bis(5-chloro-2-hydroxybenzyl)-o-phenylene-diamine(Cl-BHP), N,N'-bis(5-methyl-2-hydroxybenzyl)-o-phenylene-diamine (Me-BHP) and N,N'-bis(5-methoxy-2-hydroxybenzyl)-o-phenylenediamine(MeO-BHP) were synthesized. The ligands were characterized by elemental analysis, mass and NMR spectroscopy. The elemental analysis showed that the ligands were isolated as dihydrochloride salt. The potentiometry study revealed that the proton dissociation constants$(logK_n{^H})$ of ligands and stability constants $(logK_{ML})$ of transition and heavy metals complexes. The order of the stability constants of each metal ions for ligands was Br-BHP < Cl-BHP > H-BHP < MeO-BHP < Me-BHP.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.50-56
• /
• 2004

The wienner sausage(natural casing, N), wienner sausage(collagen casing, C), frankfurter sausage(F) and can products[spam(S), luncheon meat(L), jangjorim(J)] were obtained from different Korean meat processing companies and investigated for their salinity, saccharinity, pH, moisture and fat content, meat color and sensory evaluation. In sausage products, the saccharinity percent ranged 4.9∼5.0 in N, 6.6∼8.0 in C, and 5.2∼6.5 in F. The salinity percent of C and F were slightly higher than that of N. The pH values of all sausage product were above 6.0. The L＊ values of N were ranged 49.8∼56.7, which were slightly lower than those of C and R The sausage with high content of crude fat and high L＊value earned the highest score in overall acceptability. In can products, saccharinity percentage was higher in J compared to the S and L. The salinity percentage of S was slightly higher than those of Land J. In meat color, L＊ and a＊ values were not different between S and L, although b＊ value of L was slightly higher than that of S and J. There were not significantly different among can products, however, the product containing low-salt had the highest score in overall acceptability.