• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.53-60
• /
• 2004

In this paper, the radar antenna of navigation radar on helicopter was suggested to Ka-band lens antenna. It is type of the streamlined convex lens to reduce the air resistivity when helicopter was navigated. Although aperture area is smaller than the standard antenna just like horns, the gain is higher and beamwidth is smaller than standard horns. We made the lens by using maximum flare angle of the horn and dielectric constant of the lens. As a result, when aperture diameter was 280mm and focal length was 145mm, the return loss -21.25dB, the gain was 32.2dBi, E and H beamwidth was $1.8^{\circ}$(E-plane), $1.4^{\circ}$(H-plane), nearly $1.5^{\circ}$, and side-lobe level was -18.4 dB(E-plane), -19.5dB(H-plane) lower were presented. So this suggested type can be used for the radar antenna of navigation radar on helicopter, and it will possible just a little some sidelobe suppression by using the choked horn as a feeder horn.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1310-1317
• /
• 2004

The extracellular production of 5-aminolevulinic acid (ALA) by recombinant E. coli BL21 harboring a fusion gene hemA was investigated in a fermenter. For this purpose, the effects of various physiological factors, such as isopropylthio­$\beta$-D-galactopyranoside (IPTG) concentrations and the time of induction, on enzyme activity were studied. Optimum concentrations of glycine and succinic acid were found to be 30 mM and 90 mM, respectively. When the cells were permitted to grow for 2 h prior to the addition of 0.1 mM IPTG, the activity of ALA synthase was higher than when IPTG was initially added. A 36-fold increase in the activity was observed with only 0.1 mM IPTG added. The pH of the medium also influenced the ALA synthase activity with the maximal activity occurring at pH 6.5. In recombinant E. coli extracts, the repeated addition of glycine and D-glucose increased the production of ALA and the inhibited intracellular ALA dehydratase activity, with up to 32 mM ALA being produced in the cultivation.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.10-16
• /
• 1995

Dyes are released into the environment from industrial wasterwater. They are considered to be a pollution problem because of the wide spread into environment with a variety of colors. In order to biological treatment of industrial dyes waste water, biodegradation of reactive dyes such as Rifacion Red H-3EB, Rifazol Blue BT, Rifacion Yellow P-4G and Rifacion Brown RT were carried out decolorized by Aspergillus sojae B-10. Aspergillus sojae B-10 showed the almost completely biodegradation ability when it was cultivated in a 2.0% glucose, 0.06% sodium nitrite, 0.1% $KH_2PO_4$, 0.5% $MgSO_4\cdot 7H_2O$ containing each reactive dyes (500 ppm) under the optimal conditions of 32$\circ$C and pH 5. The mycelium of Aspergillus sojae B-10 was produced extracellular enzyme which has concerned responsible for dyes biodegradation. Under optimal conditions, reactive dyes started being decolorized within 24 hr and its was almost decolorized c ompletely after 5 days incubation. Rifazol blue RT was not completely decolorized until 5 days of cultivation. Rafacion Red BT, Rifasol blue BT and Rifacion yellow P-4G were completely decolorized after 5 days cultivation.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.683-693
• /
• 2014

This study was carried out to investigate the characteristics of the organic liquid fertilizer and find out optimum fermentation conditions of Effective Microorganisms (EM) including ascidian tunic. During the EM fermentation by adding ascidian tunic, electrical conductivity (EC) was increased, contrast to decrease the pH value, on related to the initial dosage molasses rate. Additionally, the total nitrogen quantity was shown to be increased on EM fermentation and the most effective increasing was recorded up to 220% on more than 15% molasses dosage condition. The phosphorus quantity was to be maximum rate on 21th of EM fermentation, and other contents, such to potassium, calcium, magnesium, sodium, had be shown an increasing patten during the fermentation period. After the EM fermentation, the concentration of hazardous material (Zn, As, Cd, Cu, Cr, Hg, Ni, pb) was measured below than the official criteria for commercial fertilizer. As a effective material in fermentated fertilizer, the 29 kinds free amino acids were detected and their total concentration was measured to 7080.94 mg/L.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.1
• /
• pp.31-36
• /
• 2011

Objective: To determine whether the serum ${\beta}$-human chorionic gonadotropin (hCG) profile following preimplantation genetic diagnosis (PGD) is lower than that of intracytoplasmic sperm injection (ICSI) cycles. Methods: A total of 129 PGD cycles and 1,161 age-matched ICSI cycles, which resulted in pregnancy (serum ${\beta}-hCG{\geq}5$ mIU/mL) on post-ovulation day (POD) 12 were included. We compared the mean serum ${\beta}$-hCG levels on POD 12, 14, 21, and 28, doubling time of serum hCG, and created a cut-off value for predicting a singleton pregnancy in each group. Results: The mean serum ${\beta}$-hCG concentration of the PGD group was significantly lower than that of the control group on POD 12, 14, and 21. The doubling time of serum ${\beta}$-hCG at each time interval showed no significant difference. The cut-off-value of serum ${\beta}$-hCG for predicting a single viable pregnancy was 32.5 mIU/mL on POD 12 and 113.5 mIU/mL on POD 14 for the PGD group, which was lower than that for the control group. Conclusion: Blastomere biopsy may decrease the ${\beta}$-hCG-producing activity of the trophoblasts, especially in early pregnancy. Setting a lower cut-off value of serum ${\beta}$-hCG for predicting pregnancy outcomes in PGD may be needed.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.4 no.1
• /
• pp.21-32
• /
• 2019

Eggshell is a waste material after the usage of egg. In this work, biowaste chicken eggshells were used for preparing carbonated hydroxyapatite (HA) nanoparticles of high purity through aqueous precipitation method at room temperature. The eggshell-derived HA will be a cost-effective bioceramics for biomedical applications and an effective material-recycling technology. Additionally, mulberry leaf extract was used as a template to regulate the morphology, size and crystallinity of HA, and the effects of pH value were also examined. Characterization of the samples was performed by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. Scanning electron microscopy (SEM) was used to determine the size, shape and morphology of HA. The results indicate that only one phase of HA were synthesized in the both absence and presence of mulberry leaf extract at pH of 7 and above, while DCPD or DCPA/DCPD phase was observed at pH 4 condition. The crystallite sizes of the HA samples obviously decreased when adding mulberry leaf extract as a template, while they decreased gradually as the solution pH levels increased. With increasing pH level from 7 to 14, the rod-like HA nanoparticles gradually changed to spherical shape at pH 14. Note that, the obtained product is Mg and Sr containing A- and B-type carbonate HA at alkaline pH and it can be a potential material for biomedical applications.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.8
• /
• pp.1271-1283
• /
• 2007

A fibrinolytic protease (PoFE) was purified from the cultured mycelia of the edible oyster mushroom Pleurotus ostreatus, using a combination of various chromatographies. The purification protocol resulted in an 876-fold purification of the enzyme, with a final yield of 6.5%. The apparent molecular mass of the purified enzyme was estimated to be 32 kDa by SDS-PAGE, fibrin-zymography, and size exclusion using FPLC. The optimal reaction pH value and temperature were pH 6.5 and $35^{\circ}C$, respectively. PoFE effectively hydrolyzed fibrinogen, preferentially digesting the $A{\alpha}$-chain and the $B{\beta}$-chain over the ${\gamma}$-chain. Enzyme activity was enhanced by the addition of $Ca^{2+},\;Zn^{2+},\;and\;Mg^{2+}$ ions. Furthermore, PoFE activity was potently inhibited by EDTA, and it was found to exhibit a higher specificity for the chromogenic substrate S-2586 for chymotrypsin, indicating that the enzyme is a chymotrypsin-like metalloprotease. The first 19 amino acid residues of the N-terminal sequence were ALRKGGAAALNIYSVGFTS, which is extremely similar to the metalloprotease purified from the fruiting body of P. ostreatus. In addition, we cloned the PoFE protein, encoding gene, and its nucleotide sequence was determined. The cDNA of cloned PoFE is 867 nucleotides long and consists of an open reading frame encoding 288 amino acid residues. Its cDNA showed a high degree of homology with PoMEP from P. ostreatus fruiting body. The mycelia of P. ostreatus may thus represent a potential source of new therapeutic agents to treat thrombosis.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.221-232
• /
• 2009

The load distribution factor (LDF) values of simplified composite H beam panel bridges (SCHPBs) that were subjected to one lane and two lane loads were investigated using three dimensional finite element analyses with the computer program ABAQUS (2007). This study considered some design parameters such as the slab thickness, the steel plate thickness, the span length, and the continuity of the SCHPBs in the development of new LDFs. The distribution values that were obtained from these analyses were compared with those from the AASHTO Standard, LRFD, and the equations presented by Tarhini and Frederick, Huo et al., Back and Shin, and Cai. The AASHTO Standard distribution factors for SCHPBs were found to be very conservative. Sometimes, the distribution values from the finite element analyses for interior girders were similar to the results of the AASHTO LRFD, whereas the values for exterior girders were conservative in most cases. The new distribution values that were presented in this study produced LDFs that are more conservative than those from the finite element method. For the simple application of the design to SCHPBs, bridge engineers can use 0.42 for the interior girder and 0.32 for the exterior girder. The proposed values improve the current design procedure for the LDF problem and increase SCHPB design efficiency.

• Journal of Radiation Protection and Research
• /
• v.32 no.3
• /
• pp.117-122
• /
• 2007

The hydrodynamic behaviors of the clarifier with an interior baffle in a wastewater treatment plant was investigated by using a radiotracer $^{99m}Tc$(30 40 mCi) to verify the results of CFD(computational fluid dynamics) modelling in the previous study. The clarifier model was manufactured with consideration to the hydraulic similarity(1/21) of a real plant($L{\times}W{\times}H:2.6{\times}0.4{\times}0.2m$). By installation of an interior baffle to the clarifier, the strong density current at the bottom of the clarifier decreased substantially and increased the area of sludge settling zone, which were visualized successfully from the radiotracer experiment. Also the portion of short circuit stream changed from 48 % to 32 % and the mean residence time of sludge decreased from 940 sec to 810 sec, which corresponds to the results of CFD modelling. As a result, it is anticipated that radiotracer technology can be used as an important tool for designing new wastewater treatment plants and verifying their performances after structural modifications.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2023

Because the application of lithium has gradually increased for the production of lithium ion batteries (LIBs), more research studies about recycling using solvent extraction (SX) should focus on Li⁺ recovery from the waste solution obtained after the removal of the valuable metals nickel, cobalt and manganese (NCM). The raffinate obtained after the removal of NCM metal contains lithium ions and other impurities such as Na ions. In this study, we optimized a selective SX system using di-(2-ethylhexyl) phosphoric acid (D2EHPA) as the extractant and tri-n-butyl phosphate (TBP) as a modifier in kerosene for the recovery of lithium from a waste solution containing lithium and a high concentration of sodium (Li⁺ = 0.5 ~ 1 wt%, Na⁺ = 3 ~6.5 wt%). The extraction of lithium was tested in different solvent compositions and the most effective extraction occurred in the solution composed of 20% D2EHPA + 20% TBP + and 60% kerosene. In this SX system with added NaOH for saponification, more than 95% lithium was selectively extracted in four extraction steps using an organic to aqueous ratio of 5:1 and an equilibrium pH of 4 ~ 4.5. Additionally, most of the Na⁺ (92% by weight) remained in the raffinate. The extracted lithium is stripped using 8 wt% HCl to yield pure lithium chloride with negligible Na content. The lithium chloride is subsequently treated with high purity ammonium bicarbonate to afford lithium carbonate powder. Finally the lithium carbonate is washed with an adequate amount of water to remove trace amounts of sodium resulting in highly pure lithium carbonate powder (purity > 99.2%).