• 한국연소학회지
• /
• 제20권2호
• /
• pp.36-39
• /
• 2015

The combustion characteristics of metal fiber burner fueled natural gas with tail gas produced from reforming process were analyzed on the point of flame stability and excess air conditions. Also, it was analyzed the effect of energy efficiency improvement due to decrease the fuel input in reforming system by using residue gases. As a results, it was confirmed that tail gas including hydrogen, CO and $CO_2$ could be directly injected without any change of air control system in natural gas burner and also energy efficiency was increased up to 30% maintained stable combustion.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.168-174
• /
• 2000

A diode laser sensor system based on absorption spectroscopy techniques has been developed to measure $CO_2$ concentration and temperature non-intrusively in high temperature combustion environments using a 2.0 ${\mu}m$ DFB(Distributed Feedback) laser. Two optics was fabricated in pig-tail fashion and all optical components were implemented in a single box. The evolution of measurement sensitivity was done using test cell by changing sweep frequency and $CO_2$ concentration. Gas temperature was determined from the ratio of integrated line strengths. Species concentration was determined from the integrated line intensity and the measured temperature. The result show that the system has 2% error in wide operation frequency range and accuracy of $CO_2$ concentration was about 3%. The system was applied to measure temperature and concentration in the combustion region of a premixed $CH_4$ +air triangular flame. The measurement results of gas temperature agreed well with thermocouple results. Many considerations were taken into account to reduce optical noise, etalon effect, beam steering and base line matching problem. The evaluations results and actual combustion measurement demonstrate the practical and applicability for in-situ and real time combustion monitoring in a practical system.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.1-6
• /
• 2011

Flame extinction and the chemistry of stoichiometric methane/air mixture were investigated numerically in the PSR(perfectly stirred reactor). For the study, PSR code was modified to be possible to unsteady calculation, and the sinusoidal fluctuation was subjected to the residence time. In the region of residence time far from the extinction limit, combustion mode was strongly dependent on the frequency. The low frequency excitation provided the quasi-steady behavior on the temperature and the concentrations of related species, but small variation of temperature was observed under high frequency. In the region of residence time near the extinction limit, the mixture subjected above 1 KHz was still reacting even though extinction had to be occurred under quasi-steady concept. The attenuation of extinction limit resulted from that chemical time was comparable to the flow time. The mean mole fractions of both NO and CO were almost same regardless of imposed frequency. However, the average mole fraction of $C_2H_2$ was decreased as increasing frequency, which implies that soot yield might be reduced at the higher frequency of flow excitation. The result provides the basic concept for flame stabilization, and it will be used to design a mild combustor.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1363-1370
• /
• 1997

Single liquid droplet combustion processes including heating, evaporation, droplet burning and flame radiation were theoretically investigated by adopting nongray gas radiation model for the radiative transfer equation (RTE). n-Heptane was chosen as a fuel and the numerical results were compared with the experimental data available in the literature. The discrete ordinate method (DOM) was employed to solve the radiative transfer equation and the weighted sum of gray gases model (WSGGM) was applied to account for nongray effect by CO$_{2}$, and H$_{2}$0. Therefore, detailed effects by nongray gas and its comparison with the gray gas model could be figured out in the results. It is found that the radiative heat flux is higher when the nongray model is used, thereby reducing the maximum gas temperature and the flame thickness, but the total burning time increases due to the deceased conductive heat flux in nongray model. Consequently, a better agreement with experimental data could be obtained by using nongray model.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.453-456
• /
• 2011

합성가스를 이용한 충돌제트 버너에서 신장된 예혼합 화염의 열전달 특성에 관한 실험적 연구를 수행하였다. 본 연구에서는 석탄을 가스화하는 과정에서 추출되는 수소와 일산화탄소를 혼합한 합성가스를 연료로 사용하였다. 정체점에서의 열유속은 전체 신장율이 증가함에 따라 증가하다 다시 감소하는 것이 관찰되었다. 또한 정체점에서의 열유속이 노즐로부터 충돌판까지 거리가 증가함에 따라 증가하는 것을 확인하였다. 본 연구는 석탄에서 발생하는 부생가스의 주성분인 수소와 일산화탄소를 실용화하는 연구 중 기초 연구이다.

• 연구논문집
• /
• 통권27호
• /
• pp.101-108
• /
• 1997

The characteristics of combustion and emissions in multi-staged oil burner have been experimentally studied for the various range of equivalence ratios, drop sizes and fuel formulations. Malvern system was used to measure droplet size of fuel. Light fuel oil and light fuel oil doped with pyridine($C_5H _5N$) were used to investigate the effects on fuel NOx emission. The emissions of NO and CO in exhaust gas and the flame temperatures were measured by the gas analyzer and thennocouples. NOx emissions were increased by increasing the excess air ratio (range:$lambda=1.1-1.4$) or decreasing the SMD of droplet in single-staged burner. In comparison with the single-staged burner, the emission of NOx in multi-staged burner was reduced by 50% but CO emission was slightly increased. It is found that multi-staged burner has a good capability in reducing thermal NOx resulting from the distributed heat release rate and lower flame temperature in fuel-rich and fuel-lean combustion zone. Moreover, the fuel NOx emission of the multi-staged burner is lower than that of single-staged burner, because multi-staged burner has fuel rich zone where fuel N is converted to $N_2$ more than NO. In 3-staged burner, the percentage of each stage combustion air have strong influence on emission characteristics. It is also found that NOx emission can be reduced by decreasing inner and outer air percentage or increasing middle air flow rate and CO emission is vice versa.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.249-251
• /
• 2014

Synthesis gas such as hydrogen and carbon monoxide was produced from $CH_4//oxygen$ mixture using two-section porous media combustor. Heat recirculation through the inner foam structure could extend the flow velocity of stable region over the laminar burning velocity. $H_2/CO$ ratio and module M from concentration of flue gas measured by Gas Chromatography was similar to those calculated by equilibrium. But it was made sure that the heat loss effect becomes more influential than heat recirculation effect as the mixture gets richer. To generate synthesis gas appropriate for methanol production, insulated pressurized porous media combustor will be designed and built in the future.

• Elastomers and Composites
• /
• 제36권4호
• /
• pp.268-277
• /
• 2001

PPG, PEG, trimethylolpropane(TMP) 등의 폴리올에 MDI(4,4'-diphenyl methane diisocyanate)를 각각 혼합하고 경화시켜 여러가지 물성을 측정하였다. 경화시간은 PEG와 TMP의 함량이 늘어날수록 짧게 나타났고 분자량의 효과보다는 관능기의 수에 더 큰 영향을 받았다. NCO-OH 반응은 NCO-NCO반응보다 활성적이고 빠르게 일어났다. 경도는 가교밀도와 분자구조의 영향을 받았으며 NCO-NCO 반응으로 생긴 도막은 취약하였고 NCO-OH간의 반응으로 생긴 도막은 유연하였다. 부착력은 결정화도와 수축율이 클수록 낮은 값을 나타내었으며 TMP 함량이 증량될수록 높은 값을 나타내었다. 난연성은 난연제의 종류와 함량에 영향을 받았으며 난연효과는 IXOL B-251이 가장 우수하였고 TCCP는 수지와의 상용성이 좋지 않아 부분적으로 분리되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.444-450
• /
• 2011

A novel method that utilizes poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] as a solid-phase extractant was developed for simultaneous preconcentration of trace Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) prior to the measurement by flame atomic absorpiton spectrometry (FAAS). Experimental conditions for effective adsorption of the metal ions were optimized using column procedures. The optimum pH value for the simultaneously separation of the metal ions on the new adsorbent was 2.5. Effects of concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of the analytes were investigated. A high preconcentration factor, 100, and low relative standard deviation values, $\leq$1.5% (n = 10), were obtained. The detection limits (${\mu}gL^{-1}$) based on the 3s criterion were 0.18 for Cd(II), 0.11 for Co(II), 0.07 for Cr(III), 0.12 for Cu(II), 0.18 for Fe(III), 0.67 for Mn(II), 0.13 for Ni(II), 0.06 for Pb(II), and 0.09 for Zn(II). The validation of the procedure was performed by the analysis of two certified reference materials. The presented method was applied to the determination of the analytes in various environmental samples with satisfactory results.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.563-567
• /
• 2006

The application of a synergistic solvent extraction by the formation of ternary complex with pyrocatechol violet (PV) and benzalkonium chloride (BC) was studied for determination of trace Zn(II) in water samples. The pH of sample solution and the amount of PV and BC added were optimized for the formation of the stable complex, a proper solvent was selected for the effective extraction, and the concentration of nitric acid was fixed for the back extraction of the complex from the solvent. After the ionic strength of 100 mL sample solution was adjusted to 0.1 M by adding NaCl and the pH was fixed at 9 with a carbonate buffer, 1.0 mL of 2% PV solution was added to form Zn(II)-PV complex then the Zn(II)-PV/BC ternary complex was made by adding 1.0 mL of 10% BC solution. The ternary complex was extracted into 10 mL of MIBK. And the ternary complex was back-extracted with 10 mL of 1.0 mol/L nitric acid to determine Zn(II) by a flame atomic absorption spectrophotometer (flame-AAS). The interference of concomitant ions on the extraction of Zn(II) was investigated. This procedure was applied to the analysis of three real samples such as Dalbang-dam water, laboratory tap water and Jungnajin seawater. The recoveries of Zn(II) in spiked samples were 86.58-104.1%.