• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.115-116
• /
• 2002

This study was carried out as one of efforts to overcome difficulties in air bearing design due to low stiffness and low damping. Hydrodynamic effects on hydrodynamic stiffness of a fluid film in a high speed air bearing with tow-row air sources are investigated. The hydrodynamic effects by the high speed over DN 1,000,000 and eccentricity of a proceeding which are not considered in conventional design of an air bearing need to be reconsidered. The hydrodynamic effects, which dominantly influence on the load capacity of air bearing, are caused mainly by proceeding speed, eccentricity, and the source positions. The two-row source arrangement in the air bearing produces quite unique hydrodynamic effects with respect to pressure distribution of the air film. Optimal arrangement of the two-row sources improves performance of an air bearing in film reaction force and loading capacity of high speed spindles. This study compares the pressure distribution by numerical simulation as a function of eccentricity of proceeding and the source positions. The air source position 1/7L form one end of an air bearing was found to be superior to source position of 1/4L. The dynamic stiffness were obtained using a two-dimensional cutting method which can directly measure the cutting reaction forces and the displacements of the spindle in two directions using a tool dynamometer and transducer sensors. Heat generation in the air film can not be negligible over the speed of DN 2,000,000. In order to analysis effects of heat generation on the characteristics of air bearing, high cooling bearing spindle and low cooling bearing spindle were tested and compared. Characteristics of the frequency response of shaft and motion of run out errors were different for the spindle. The test results show that, in the case of low cooling bearing spindle, the stiffness became smaller due to heat generation. The results, which were obtained for high speed region, may be used as a design information for spindle which can be applied to precision devices such as ultra precision grinding and ultra high speed milling.

• Korean Journal of Clinical Laboratory Science
• /
• v.43 no.4
• /
• pp.179-187
• /
• 2011

Animal models are important tools in thrombosis research and preclinical drug development. In recent studies, ferric chloride ($FeCl_3$) has been widely used to induce arterial thrombosis in a variety of species. The purpose of this study was to find an optimal concentration of $FeCl_3$ and validate this model suited better for thrombosis research. A small piece of filter paper, soaked in $FeCl_3$ solution (10, 20 or 35%, v/v, in distilled water) was topically applied on the carotid artery of SD rats to measure the time to occlusion (TTO) and thrombus weight (TW) to ascertain 35%, as an optimal $FeCl_3$ concentration ($8.63{\pm}0.92min$; p =0.000, $0.79{\pm}0.03mg/mm$; p =0.000, respectively). To validate this experimental model, Ginkgo biloba special extract EGb761 (5, 10 or 30 mg/kg) as a reference agent administered by peritoneal route for 1h prior to the induction of thrombosis, showed significantly delayed TTO in a dose dependent manner ($18.50{\pm}2.17$, $29.17{\pm}1.83$, and $38.00{\pm}1.79min$, respectively) and significantly reduced TW and repaired collagen fibre in the injured vessel compare to vehicle group. Our results provide a simple, reproducible and well controlled in vivo screening system to induce thrombosis in rats by the topical application of 35% $FeCl_3$ to assess the efficacy of the new anti-thrombotic agents.

• The Journal of Korean Society for Radiation Therapy
• /
• v.1 no.1
• /
• pp.63-69
• /
• 1985

High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefore, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed does, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under $3\%$ errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under $5\%$ errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatters; i.e., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.

• 연구논문집
• /
• s.27
• /
• pp.101-108
• /
• 1997

The characteristics of combustion and emissions in multi-staged oil burner have been experimentally studied for the various range of equivalence ratios, drop sizes and fuel formulations. Malvern system was used to measure droplet size of fuel. Light fuel oil and light fuel oil doped with pyridine($C_5H _5N$) were used to investigate the effects on fuel NOx emission. The emissions of NO and CO in exhaust gas and the flame temperatures were measured by the gas analyzer and thennocouples. NOx emissions were increased by increasing the excess air ratio (range:$lambda=1.1-1.4$) or decreasing the SMD of droplet in single-staged burner. In comparison with the single-staged burner, the emission of NOx in multi-staged burner was reduced by 50% but CO emission was slightly increased. It is found that multi-staged burner has a good capability in reducing thermal NOx resulting from the distributed heat release rate and lower flame temperature in fuel-rich and fuel-lean combustion zone. Moreover, the fuel NOx emission of the multi-staged burner is lower than that of single-staged burner, because multi-staged burner has fuel rich zone where fuel N is converted to $N_2$ more than NO. In 3-staged burner, the percentage of each stage combustion air have strong influence on emission characteristics. It is also found that NOx emission can be reduced by decreasing inner and outer air percentage or increasing middle air flow rate and CO emission is vice versa.

• Journal of muscle and joint health
• /
• v.28 no.1
• /
• pp.18-29
• /
• 2021

Purpose: This study examined the knowledge and education needs of nurses in charge of adequacy evaluation in small and medium-sized hospitals. Methods: Study participants included 198 nurses in charge of adequacy evaluation in small and medium-sized hospitals. Data were collected from November 19 to 28, 2020 through an online survey. The data were analyzed by independent t-test and one way ANOVA analysis using the SPSS. Results: The knowledge score for the adequacy evaluation of small and medium-sized hospitals was 11.61±4.10 (total of 20 points), and the educational demand was 3.87±0.88 points on a 5-point scale. Regarding the necessity of education for adequacy evaluation of small and medium-sized hospitals, 80.3% of the participants claimed education as being necessary. "Online video lectures" were the most preferred (22.7%) education method, and "2 times" was the most frequent education (47.0%); "1 hour" was the usual duration of class (48.5%). Conclusion: It is necessary to develop and apply an educational program reflecting the measure of educational needs to improve the knowledge level of nurses in charge of adequacy evaluation in small and medium-sized hospitals.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.35-43
• /
• 2015

In this study, it was performed in characteristics of settlement of roadbed materials with variation of water content using cylinder model device. The ratio of settlement ($R_e$) of subgrade soils in the initial water content were about 2.08, whereas it was increased about 4.06 which resulted in increase two times in the initial water content. Also, it was monitoring long-term to measure variation of the field water contents at concrete track using rainfall measuring sensors. The water content at directly underneath of concrete track rarely seems to affect the variation of water content, but it was increased by about 4% than intial water content with 20 mm/hr rainfall index at slope section. As for the result from the field date, it was determined that the water content of the inner subgrade layer was rarely affect caused by more than 20 mm/h rainfall index during if good drainage system at concrete track properly maintained.

• Journal of the Korean Society of Tobacco Science
• /
• v.37 no.1
• /
• pp.18-24
• /
• 2015

Urinary mutagenicity is widely recognized as a useful biomarker for the assessment of mutagen exposure level in human. In this study, we optimized the several parameters affecting the activity of Urinary mutagenicity using highly sensitive mutation test(microsuspension assay) instead of the conventional Ames test. First of all, we chose YG1024 as a highly sensitive strain from three str ains of Salmonella typhimurium(TA98, TA100, YG1024) using r epr esentative mutation substances, such as Benzo[a]pyrene, 2-Aminonaphthalene, 2-amino-3-methyl-9H-pyrido[2,3-b]indole($MeA{\alpha}C$) and cigarette total particulate matter(TPM). And we established the several kinds of test conditions such as number of bacter ia, concentr ation of metabolic activation system and incubation time for the most sensitive reaction. Also, we optimized efficient pre-treatment method using commercial C18 column. As a r esults, this method was shown a aver age of 94 % recovery value and 13 % relative standard deviation. When we compared the Urinary mutagenicity between several participants, we confirmed that compar ative measurements were possible for different levels of urine mutagenicity. In conclusion, the optimized highly sensitive mutation test to measure the Urinary mutagenicity may be useful in biological monitoring of mutagen exposure level.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.70.2-71
• /
• 2021

We examine gas kinematics and star formation activities of NGC 6822, a gas-rich dwarf irregular galaxy in the Local Group at a distance of ~490 kpc. We perform profile decomposition of all the line-of-sight (LOS) HI velocity profiles of the high-resolution (42.4" × 12" spatial; 1.6 km/s spectral) HI data cube of the galaxy, taken with the Australian Telescope Compact Array (ATCA). To this end, we use a novel tool based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, the so-called BAYGAUD, which allows us to decompose a velocity profile into an optimal number of Gaussian components in a quantitative manner. We group all the decomposed components into bulk-narrow, bulk-broad, and non-bulk gas components classified with respect to their velocity dispersions and the amounts of velocity offset from the global kinematics, respectively. Using the surface densities and velocity dispersions of the kinematically decomposed HI gas maps together with the rotation curve of NGC 6822, we derive Toomre-Q parameters for individual regions of the galaxy which quantify the level of local gravitational instability of the gaseous disk. We also measure the local star formation rate (SFR) of the corresponding regions in the galaxy by combining GALEX Far-ultraviolet (FUV) and WISE 22㎛ images. We then relate the gas and SFR surface densities in order to investigate the local Kennicutt-Schmidt (K-S) law of gravitationally unstable regions which are selected from the Toomre Q analysis. Of the three groups, the bulk-narrow, bulk-broad and non-bulk gas components, we find that the lower Toomre-Q values the bulk-narrow gas components have, the more consistent with the linear extension of the K-S law derived from molecular hydrogen (H2) observations.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.1
• /
• pp.40-47
• /
• 2022

Purpose: The modified Broström repair (BR) technique has yielded good outcomes in patients with chronic ankle instability. This study compared clinical and radiological outcomes between two groups of patients who underwent modified BR or lateral ligament augmentation using suture tapes (ST). Materials and Methods: Seventy-seven patients (ST group [n=47], BR group [n=30]; body mass index <26.61 kg/m²; mean age, 30.7±11.0 years [range, 17~39 years]; mean follow-up, 34.0±12.0 months [range, 24~59 months]) were retrospectively reviewed between January 2014 and July 2017. The Foot and Ankle Outcome Score (FAOS), American Orthopedic Foot and Ankle Score (AOFAS), Foot and Ankle Ability Measure (FAAM), visual analogue scale (VAS) score, and Sefton grading system were used for clinical assessment. The talar tilt angle and anterior talar translation were measured using the Telos stress device (Telos GmbH, Marburg, Germany) at 150 N for radiological evaluation. Results: FAOS, AOFAS, FAAM, and VAS scores improved in both groups at final follow-up (ST, 91.1±5.2, 93±2, 88.1±4.5, 1.5±0.7 vs. BR, 91.3±5.4, 93±3, 83.3±4.8, 1.2±0.7, respectively; p=0.854, 0.971, <0.001, 0.04, respectively). According to the FAOS, mean sports activity scores for the ST and BR groups at the final follow-up were 90.3±3.2 and 76.6±4.2, respectively, reflecting superior outcomes in the ST group (p<0.001). Sefton grading revealed satisfactory functional outcomes (ST, 91.5% vs. BR, 90.0%). There was significant improvement in the talar tilt angle and anterior talar translation in both the ST and BR groups (7.6°±1.2°, 10.5±1.8 mm vs. 4.9°±1.1°, 7.9±1.5 mm, respectively; p<0.001). Conclusion: The ST group demonstrated comparable clinical but better improvement in mechanical stability and FAOS sports scores than the BR group.

• Journal of Radiation Protection and Research
• /
• v.33 no.3
• /
• pp.105-112
• /
• 2008

To measure the soil-to-plant transfer factors ($TF_a,\;m^2\;kg^{-1}$-fresh) of radionuclides deposited during the growing season of potato, a radioactive solution containing $^{54}Mn,\;^{60}Co,\;^{85}Sr$ and $^{137}Cs$ was applied to the soil surfaces in soil boxes 2 d before seeding and three different times during the plant growth. For the pre-seeding application (PSA), radionuclides were mixed with the topsoil (loamy sand and 5.2 in pH). The plant parts investigated were leaves, stems, tuber skin and tuber flesh. The $TF_a$ values of $^{54}Mn,\;^{60}Co,\;^{85}Sr$ and $^{137}Cs$ from the PSA were in the ranges of $1.9{\times}10^{-4}{\sim}1.5{\times}10^{-2}$, $1.8{\times}10^{-4}{\sim}7.5{\times}10^{-4}$, $4.0{\times}10^{-4}{\sim}1.6{\times}10^{-2}$, $1.5{\times}10^{-4}{\sim}3.9{\times}10^{-4}$ respectively, for different plant parts. The TFa values from the growing-time applications were on the whole a few times lower than those from the PSA. For $^{54}Mn,\;^{85}Sr$ and $^{137}Cs$, the $TF_a$ values from the early- or middle-growth-stage application were higher than those from the late-growth-stage application, whereas the opposite was true for $^{60}Co$. Leaves and tuber flesh had the highest and lowest $TF_a$ values, respectively, in most cases. The total uptake from soil by the four plant parts was in the range of $0.05{\sim}3.16%$. In the third year following the PSA, the $TF_a$ values of $^{54}Mn,\;^{60}Co$ and $^{137}Cs$ were $11{\sim}25%$, $21{\sim}25%$ and $38{\sim}67%$ of those in the first year, respectively, depending on the plant parts. The present results can be used for estimating the radiological impact of an acute radioactive deposition during the growing season of potato and for testing the validity of relevant food-chain models.