• Investigative Magnetic Resonance Imaging
• /
• 제15권1호
• /
• pp.48-56
• /
• 2011

목적 : 본 연구에서는 금 나노 입자를 통한 국소 가열과 MR 온도 영상 기법을 결합한 Theragnosis 개념에 대한 가초연구로 금 나노 입자의 특성 및 제조 조건에 따른 MR 변수의 변화를 연구하였다. 대상 및 방법 : 실험실에서 제조된 구형과 막대형 금 나노 입자를 사용하였다. 구형 입자는 합성방법과 교반속도(stirring speed: rpm)를 변수로 설정하였고, 막대형 입자눈 첨가된 구형 입자의 양을 변수로 하여 조건을 다양화하였다. 금 나노 입자를 2% 아가로즈 젤에 1:1 로 혼합하여 임상용 1.5T MRI 시스템에서 신호를 획득하였고, $T_1$과 $T_2$ 이완시간의 측정을 위해 TR과 TE를 조절하였다. 획득한 영상의 화소별 신호 강도플 이용하여 제작한 소프트웨어로 $T_1$과 $T_2$ 이완곡선을 추정하였고, 통계 분석으로 유의성을 검증하였다. 결과 : 구형 입자의 평균 $T_1$ 값은 $1.86{\pm}0.04$초, 막대형은 평균 $2.08{\pm}0.04$초로 막대형이 더 걸게 측정되었고, 반면 평균 $T_2$ 값은 구형과 막대형 각각 $57{\pm}2.4$ ms와 $35.45{\pm}0.1$ ms로 구형 나노 입자에서 더 길게 측정되었다. 결론 : 금 나노 입자의 형태적 특성 및 제조 조건에 따른 MR 영상 변수 $T_1$과 $T_2$ 이완시간의 변화를 확인하였다. 금 나노 입자를 이용한 MR 영상 연구의 수행 시 금 나노 입자의 형태와 제조 조건에 따른 적절한 TR과 TE로 최적화된 영상을 얻을 수 있을 것으로 기대된다.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.9-19
• /
• 2003

Exhaust emissions were characterized for a fleet of 10 alternative-fuel vehicles (AFVx) including 5 compressed natural gas (CNG) vehicles. 3 liquefied petroleum gas (LPG) vehicles and 2 85% methanol/15% California Phase 2 gasoline (M85) vehicles. In addition to the standard regulated emissions and detailed speciation of organic gas compounds, Fourier Transform Infrared Spectroscopy (FTIR) was used to measure ammonia (NH$_3$) and nitrous oxide ($N_2$O) emissions. NH$_3$, emissions averaged 0.124 g/mi for the vehicle fleet with a range from <0.004 to 0.540 g/mi. $N_2$O emissions averaged 0.022 g/mi over the vehicle fleet with range from <0.002 to 0.077 g/mi. Modal emissions showed that both NH$_3$, and $N_2$O emissions began during catalyst light-off and continued as the catalyst reached its operating temperature. $N_2$O emissions primarily were formed during the initial stages of catalyst light-off. Detailed speciation measurements showed that the principal component of the fuel was also the primary organic gas species found in the exhaust. In particular, methane, propane and methanol composed on average 93%, 79%, and 75% of the organic gas emissions, respectively, for the CNG, LPG. and M85 vehicles.

• 기술사
• /
• 제16권3호
• /
• pp.5-23
• /
• 1983

On the Seoul Metropolitan Subway Construction of No. 3, 4 Line, the total length is 57 Km and it is now undergoing almost 55％ progress. The working method is classified into Open Cut of 70% and the rest of 30% tunnelling method in the 48 job site. Above tunnelling method is execute by American Steel Support System and the rest of 10 job site carried out by New Austria Tunnelling Method. This paper describes Blasting Standardizations works on the above Tunnelling ' Open Cut Method under big slogan, first safety, second execution. As a superintendent, I strived standardization of works with Better powder, Better Drills ' Better Pattern. Geological structure of Seoul area is composed by Jurassic Granite and also the above rockgroup are over burden by Alluviums as a Unconformity. First of all, I carried out the standard amount of powder and burden through experimental standard blasting by each powder as following Blasting works in the subway construction is surrounding shop Building, under pass the city river and also under pass highest building basement floor. I made allowable Blasting Vibration Value by West-Germany Vornorm DIN 4150, Teil 3 and should measure each blasting works as fellows all of powder is used basically Low-Gravity and Low Velocity such as Slurry, Ammonium Nitrate ' Finex I, II. for Smooth Blasting Instead of Gelatin Dynamite. Electric Detonation Cap is used basically M/S Delay Cup instead of Electric delay ' Simultaneous cap. I applied following formula V=KW3/4 $D^{-2}$ V=Particle Velocity (Cm/sec) K=Ginh Huh's Value W=Delay Charge (Kg) D=Distance(m) In the Open Cut, within 1m distance from H-pile I made to use the Concrete breaker, as following V=7W/$^{0.5}$V/$^{-1.75}$ On the Concentrate Building area, I advise to use Light class drill ø36m Bit and advance 1.1m per round blasting the three boom jumbo drill over ø45mm used only suburb of city.e Light class drill ø36m Bit and advance 1.1m per round blasting the three boom jumbo drill over ø45mm used only suburb of city.

• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.23-36
• /
• 2009

The goal of esthetic restoration is to achieve morphologic, optical, and biologic acceptance. Creation of a natural looking ceramic restoration, which blends harmoniously with surrounding dentition, is not always achieved. A successful color match is an important aspect of any esthetic dental restoration. Since natural enamel has inherent translucency, it is important that ceramic restorations reproduce the translucency and color of the natural teeth. However, the final color match of porcelain crowns to adjacent natural dentition remains some problem. Difficulties related to color matching arise from the structural differences that exist between metal ceramic crowns and natural teeth, the limited range of available ceramic shades, inadequate shade guides, different types of metal alloys, repeated firing, the condensation technique, and varying compositions of ceramic materials. Many factors contribute to the esthetic success of dental restoration: optical properties such as color and its elements of hue, value, and chroma; translucency and opacity; light transmission and scattering; and metamerism and fluorescence. The purpose of this study was to determine the color changes of metal-ceramic system with different veneering porcelain powder after repeated firing. The objectives of this in vitro study were to measure the lightness($L^*$), chromaticity($a^*$), chromaticity($b^*$), chroma($C^*$), hue(h), reflectance(%), color difference(${\Delta}E$). The following conclusions were obtained: 1. An increase in the number of firings resulted in decrease in lightness($L^*$) but increase in chromacticity($a^*$) with all porcelain. After the second sintering resulted in decrease in chromacticity($b^*$) with opaque-dentin porcelain and dentin porcelain but in increase with enamel porcelain and translucency porcelain. And after the second sintering resulted in decrease in chroma($C^*$) with opaque-dentin porcelain and dentin porcelain, but on the whole side in decrease with enamel porcelain and translucency porcelain. 2. After the second firing, a increase in the number of firings resulted in decrease reflectance(%) in all wavelength. 3. There were noticeable color differences(${\Delta}E$) between first sintering and multiple firings(dentin porcelain: 5.29~8.15, opaque-dentin porcelain: 4.83~8.2, enamel porcelain: 8.93~13.15, translucency porcelain: 9.37~12.91), but the color difference(${\Delta}E$) after second sintering were down to 4.87 in all porcelain. 4. Given the NBS Criteria, a 'trace' was not found this study but a 'slight' was found 2-3, 3-5 in dentin porcelain, 2-3 in opaque-dentin porcelain, 3-5, 5-10 in enamel porcelain and translucency porcelain, a 'noticeable' was 2-5, 3-10, 5-10 in dentin porcelain and opaque-dentin porcelain, 2-3, 2-5, 3-10 in enamel porcelain 2-3, 3-10 in translucency porcelain, an 'appreciable' was 1-2, 1-3, 2-10 in dentin porcelain 1-2, 1-3, 2-10, 3-10 in opaque-dentin porcelain, 2-10 in enamel porcelain, 2-5, 2-10 in translucency porcelain, a 'much' was 1-5, 1-10 in dentin porcelain and opaque-dentin porcelain, 1-2, 1-3, 1-5 in enamel porcelain 1-2, 1-3, 1-5, 1-10 in translucency porcelain, a 'very much' was 1-10 in enamel porcelain.

• Journal of Oral Medicine and Pain
• /
• 제34권1호
• /
• pp.11-21
• /
• 2009

목적 ; 본 연구는 가스분석검사기의 일종인 Oral $Chroma^{(R)}$(CHM-1, Osaka, Japen)를 이용하여 건강검진센터에 내원하는 환자를 대상으로 전신질환 판정검사에서 이상소견을 가진 환자에서 구취를 일으키는 휘발성 황화합물을 측정 비교하여 전신질환이 구취에 미치는 영향을 알아보고자 하였다. 방법 ; 수집된 자료는 통계분석 프로그램인 Statistical Package for the Social Science12.0(SPSS Inc, Chicago, IL, USA)을 이용하여 구강검사(CPI index, 탐침 시 출혈 유무, 설태의 유무) 결과 및 각 검사별 전신질환의 유무에 따른 황화수소, 메틸 머캅탄, 황화 디메틸의 농도를 교차분석으로 분석하였다. 결과 ; 휘발성 황화합물과 관계있는 질환은 간질환과 담낭질환이라는 사실을 확인할 수 있었으며 그 외 골밀도와 혈압, 지질검사 등에서의 관련성도 관찰되어 추후 연구가 더 필요할 것으로 생각된다.

• 한국식품영양학회지
• /
• 제24권4호
• /
• pp.746-752
• /
• 2011

반고형 형태의 이유식 제조에 가장 적합한 물성을 부여하는 점증제를 선정하기 위해 쌀가루, 변성전분 1 및 변성전분 2를 4%를 첨가하거나 0.3% 펙틴을 첨가한 이유식을 550 MPa 압력에서 3분 동안 초고압 처리하여 점도를 측정하고 관능평가를 실시한 결과, 쌀가루를 첨가한 바나나와 사과 이유식 모두 색, 흐름성 및 질감에서 가장 선호도가 높았을 뿐 아니라 시판 이유식과 가장 유사한 점도를 보여 반고형 상태의 이유식 제조에 쌀가루가 점증제로 적합하였다. 점증제로 선정된 쌀가루를 4%, 6% 및 8% 첨가하여 제조한 이유식을 450 MPa과 550 MPa의 압력 조건에서 1, 3, 5분 처리한 결과, 쌀가루 첨가 비율이 높아질수록 점도와 색도의 밝기는 증가하였고, pH와 당도에서 유의적인 차이는 없었다. 또한 초고압 처리 조건에서 압력의 변화와 처리시간의 증가에 따른 유의적인 차이를 보이지 않는다. 즉 초고압 처리가 이유식의 물성에 영향을 크게 미치지 않으므로 경제성 및 점증제의 호화 정도를 고려하여 이유식 제조를 위한 초고압 처리 조건은 550 MPa, 3 min이 가장 적당한 처리 조건으로 판단되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권2호
• /
• pp.299-306
• /
• 2016

Body temperature (BT) monitoring in cattle could be used to early detect fever from infectious disease or physiological events. Various ways to measure BT have been applied at different locations on cattle including rectum, reticulum, milk, subcutis and ear canal. In other to evaluate the temperature stability and reliability of subcutaneous temperature (ST) in highly fluctuating field conditions for continuous BT monitoring, long term ST profiles were collected and analyzed from cattle in autumn/winter and summer season by surgically implanted thermo-logger devices. Purposes of this study were to assess ST in the field condition as a reference BT and to determine any location effect of implantation on ST profile. In results, ST profile in cattle showed a clear circadian rhythm with daily lowest at 05:00 to 07:00 AM and highest around midnight and rather stable temperature readings (mean${\pm}$standard deviation [SD], $37.1^{\circ}C$ to $37.36^{\circ}C{\pm}0.91^{\circ}C$ to $1.02^{\circ}C$). STs are $1.39^{\circ}C$ to $1.65^{\circ}C$ lower than the rectal temperature and sometimes showed an irregular temperature drop below the normal physiologic one: 19.4% or 36.4% of 54,192 readings were below $36.5^{\circ}C$ or $37^{\circ}C$, respectively. Thus, for BT monitoring purposes in a fever-alarming-system, a correction algorithm is necessary to remove the influences of ambient temperature and animal resting behavior especially in winter time. One way to do this is simply discard outlier readings below $36.5^{\circ}C$ or $37^{\circ}C$ resulting in a much improved mean${\pm}$SD of $37.6^{\circ}C{\pm}0.64^{\circ}C$ or $37.8^{\circ}C{\pm}0.55^{\circ}C$, respectively. For location the upper scapula region seems the most reliable and convenient site for implantation of a thermo-sensor tag in terms of relatively low influence by ambient temperature and easy insertion compared to lower scapula or lateral neck.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.125-130
• /
• 2008

Free ammonia ($NH_3$-N) inhibition of nitrite-oxidizing bacteria (NOB) has been widely studied for partial nitrification (or nitrite accumulation) and denitrification via nitrite ($NO_2^-$-N) as a low-cost treatment of ammonium containing wastewater. The literature on $NH_3$-N inhibition of NOB, however, shows disagreement about the threshold $NH_3$-N concentration and its degree of inhibition. In order to clarify the confusion, a simple and cheap respirometric method was devised to investigate the effect of free ammonia inhibition of NOB. Sludge samples from an autotrophic nitrifying reactor were exposed to various $NH_3$-N concentrations to measure the maximum specific nitrite oxidation rate ($\hat{K}_{NO}$) using a respirometer. NOB biomass was estimated from the yield values in the literature. Free ammonia inhibition of nitrite oxidizing bacteria was reversible and the specific nitrite oxidation rate ($K_{NO}$) decreased from 0.141 to 0.116, 0.100, 0.097 and 0.081 mg $NO_2^-$-N/mg NOB h, respectively, as the $NH_3$-N concentration increased from 0.0 to 1.0, 4.1, 9.7 and 22.9 mg/L. A nonlinear regression based on the noncompetitive inhibition mode gave an estimate of the Inhibition concentration ($K_I$) of free ammonia to be 21.3 mg $NH_3$-N/L. Previous studies gave $\hat{K}_{NO}$ of Nitrobacter and Nitrospira as 0.120 and 0.032 mg/mg VSS h. The free ammonia concentration which inhibits Nitrobacter was $30{\sim}50\;mg$ $NH_3$-N/L and Nitrospira was inhibited at $0.04{\sim}0.08\;mg$ $NH_3$-N/L. The results support the fact that Nitrobacter is the dominant NOB in the reactor. The variations in the reported values of free ammonia inhibition may be due to the different species of nitrite oxidizers present in the reactors. The respirometric method provides rapid and reliable analysis of the behavior and community of the nitrite oxidizing bacteria.

• 한국토양비료학회지
• /
• 제40권5호
• /
• pp.405-411
• /
• 2007

본 연구는 감귤원 토양유형별로 고정되어 있는 난용성 인산염함량을 파악하고 이를 생물학적으로 이용하고자 인산가용화 우수미생물을 선발하여 특성을 조사하였다. 토양중 난용성 인산염의 형태별 분포는 Al-P>Ca-P>Fe-P 순으로 화산회토 토양이 비화산회토 보다 많았다. PDA-P배지를 이용하여 인산염 가용화능이 우수한 Bacillus sphaericus를 분리하였으며 pH 4~5와 $30^{\circ}C$에서 생육이 제일 좋았다. Bacillus sphaericus은 $AlPO_4$에서 324.5 ppm, $Ca_{10}(PO_4)_6(OH)_2$에서 334.8 ppm, $Ca_3(PO_4)_2$에서 207.0 ppm의 유리인산을 생성하였으며 인산효소활성은 $35^{\circ}C$에서 배양할 때 높았다. Bacillus sphaericus를 Bentonite 등 담체에 고정 후 온도를 달리하여 7개월 보존기간 동안 밀도변화를 조사한 결과 $10^5c.f.u.\;g^{-1}$ 수준과 인산가용화능을 유지하여 추후 생물비료로 이용이 가능할 것으로 기대된다.

• 한국식품위생안전성학회지
• /
• 제37권2호
• /
• pp.80-86
• /
• 2022

본 연구는 시판 포장두부를 5, 13, 23, 30℃에 저장하면서 나타나는 미생물학적, 이화학적 변화를 조사하여 두부의 유통기한 경과 후 섭취 가능 기간을 측정하여 소비기한 연장에 대한 미생물학적 안전성에 대해 평가하고자 했다. 저장온도별(5, 13, 23℃) 두부의 pH 측정에 있어서 두부의 저장 기간이 길어질수록 다소 감소하는 경향을 나타냈으나, 큰 차이를 보이지 않았다. 포장두부의 hardness는 온도가 높을수록, 또 저장기간이 증가될수록 급격히 낮아지는 부패 현상을 보였다. 저장온도에 따른 두부의 미생물 변화는 온도가 증가할수록 일반세균수가 증가하였다. 5℃에 저장한 포장두부는 유통기한 경과 후 25일, 13℃에서는 7일, 23℃에서 1일 후 일반세균이 초기부패 수준인 10⁶ log CFU/g이상 검출되었다. 그러나 두부를 5, 13, 23℃에 저장기간동안 대장균군은 음성으로 나타냈다. 포장두부를 5℃에서 저장했을 때 26일후 L 값의 유의적 차이를 나타냈으며, a, b 값은 저장 기간 동안 변화가 있었으나 유의적 차이가 나타나지 않았다(P>0.05). 13℃에서 8일, 23℃에서 3일간 저장하면서 L값은 낮아지고, a, b값은 증가하였다(P<0.05).