• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.323-324
• /
• 2009

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.324-330
• /
• 2007

A new ion selective PVC membrane electrode is developed as a sensor for mercury(II) ions based on bis(benzoylacetone) propylenediimine (H2(BA)2PD) as an ionophore. The electrode shows good response characteristics and displays, a linear Emf vs. log[Hg2+] response over the concentration range of 1.0×10-6 to 1.0×10-1 M Hg(II) with a Nernstian slope of 29.8±0.75 mV per decade and with a detection limit of 2.2×10-7 M Hg(II) over the pH range of 2.5-11.5. Selectivity concentrations for Hg(II) relative to a number of potential interfering ions were also investigated. The sensor is highly selective for Hg(II) ions over a large number of cations with different charge. The sensor has been found to be chemically inert showing a fast response time of 60 s and was used over a period of 3 months with a good reproducibility (S = 0.27 mV). The electrode was successfully applied to determine mercury(II) in real samples with satisfactory results.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.121-125
• /
• 2015

Biohydrogen production from food waste via dark fermentation was conducted by using mixed culture under various environmental conditions (initial pH, initial F/M ratio, initial ferrous iron ($Fe^{2+}$), and temperature condition) in batch reactor. The results revealed that the maximum hydrogen yield of $46.19mL\;H_2/g\;COD_{add}$ was achieved at the optimal conditions (initial pH 8.0, initial F/M ratio 4.0, initial iron concentration 100 mg $FeSO_4/L$ and thermophilic condition ($55{\pm}1^{\circ}C$)). Furthermore, major volatile fatty acid (VFA) productions of butyrate (765.66 mg/L) and acetate (324.69 mg/L) were detected and COD removal efficiency was detected at 66.00%. Therefore, these optimal conditions could be recommended to operate a system.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.324-329
• /
• 2012

Mg-(9-x)Sn-xAl-1Zn (x=1, 2, 3 and 4 wt.%) alloys were subjected to indirect extrusion, and the microstructure and mechanical properties of the as-extruded Mg-Sn-Al-Zn (TAZ) alloys were investigated. The TAZ 811 alloy exhibited a finer grain structure than the TAZ 541 alloy due to a larger number of Mg2Sn particles, which pinned the grain boundaries and prevented growth of recrystallized grains. The TAZ alloys showed an unusual yield asymmetry behavior. The tension-compression yield asymmetry increased with decreasing average grain size. The TAZ 811 alloy with a small grain size exhibited a larger yield asymmetry than that of the TAZ 541 alloy having a relatively large grain size, which is mainly attributed to the low Al content and large number of second phase particles in the TAZ 811 alloy.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.20-29
• /
• 2013

The compression of video data is intended for real-time transmission of band-limited channels. Compressed video bit-streams are very sensitive to transmission error. If we lose packets or receive them with errors during transmission, not only the current frame will be corrupted, but also the error will propagate to succeeding frames due to the spatio-temporal predictive coding structure of sequences. Error detection and concealment is a good approach to reduce the bad influence on the reconstructed visual quality. To increase concealment efficiency, we need to get some more accurate error detection algorithm. In this paper, We hide specific data into the motion vector difference of each macro-block, which is obtained from the procedure of inter prediction mode in H.264/AVC. Then, the location of errors can be detected easily by checking transmitted specific data in decoder. We verified that the proposed algorithm generates good performances in PSNR and subjective visual quality through the computer simulation by H.324M mobile simulation tool.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.319-324
• /
• 2001

본 연구에서는 NaOH로 첨착시킨 활성탄의 표면특성변화와 H$_2$S 흡착능을 고찰하였다. 첨착시약으로 사용된 NaOH 용액의 농도는 1~8N이며, 활성탄의 입자크기는 8$\times$30mesh가 적용되었다. 실험결과는 첨착율이 0.87~5.8% 범위 내에서 증가할수록 BET 표면적은 1050$m^2$/g에서 783$m^2$/g로 감소하며, 표면산도는 0.541meq/g-AC에서 0meq/g-AC으로 감소하고, pH는 9.56에서 10.86으로 증가하는 것으로 밝혀졌다. 또한 NaOH로 첨착시킨 활성탄의 H$_2$S 평형흡착능을 보임으로써 비첨착활성탄에 비해 2~3배 높은 수준을 나타냄을 알 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.323-324
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.322-324
• /
• 2000

This paper introduces the concepts of UML(Unified Modeling Language) and the applying this technique for implementing voltage stability analysis program. Conventional function-oriented software development methodologies are inadequate to support further maintenance and enhancement. To overcome drawbacks of these methodologies, this paper proposes applying object-oriented technology for voltage stability evaluation software development. In this paper, a modal analysis approach, a steady-state voltage stability evaluation method, is used and UML is applied to the analysis and design for software development.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.324-326
• /
• 1997

Low power ZnO-Si gas sensor below 500 mW at operating temperature has been fabricated by using micromachining technique. I-V measurement shows the power consumption of 260 mW at $400^{\circ}C$ The sensitivity of the sensor was 45 percent at operating temperature of $350^{\circ}C$(230 mW) with 1,000 ppm CO gas atmosphere. The response and the recovery time found out to be 94 sec and 180 sec, respectively, when CO gas was used. In order to measure the exact temperature of the gas sensing layer, Pt/Cr bilayer-RTD was used in this experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.324-324
• /
• 2023

수제는 비용 대비 높은 효율을 가지는 수공 구조물로 하천과 해안에 많이 이용된다. 수제는 하천에서 식생물의 서식처, 유량 확보, 하천시설 보호 등의 목적으로 설치되며 해안에서는 해안선보호, 수심 확보 등의 다양한 목적으로 설치된다. 수제는 일반적으로 넓은 영역을 제어할 수 있도록 여러개의 군수제 형태로 설치한다. 수제설치 시 기존 하도나 수로의 흐름에 교란이 일어나는데 본류부에서는 하폭이 좁아져 수제선단부에 의한 영향으로 높은 유속이 발생되며 수제역내에서는 재순환흐름과 함께 다양한 형태의 유속분포가 형성된다. 이러한 수제에 의한 흐름은 수제 선단부의 영향으로 발생하는 흐름분리선(Separation Layer)을 기준으로 흐름중심선(Talweg Line)과 흐름분리영역(Separation area)을 만들어내며 수제역내의 재순환영역에서 완화된 유속은 제방을 침식으로부터 보호하며 식생물의 서식처를 제공한다. 기존의 연구는 대부분 단일수제에 대한 연구가 수행되었으며 연속된 군수제에 대한 연구는 다소 제한된 조건에서 수행되었다. 이에 본 연구에서는 연속된 수제가 설치된 경우 수리실험을 통해 수제주변의 흐름 변화 특성을 분석하였다. 수리실험은 30.0m(L')×1.52m(B')×1.10m(H')의 직선 개수로에 050m(l)×0.10m(b)×0.25m(h)의 수제를 수로측면을 따라 연속적으로 배열하여 설치하였다. 실험은 수심, 유량, 수제설치간격을 변화시키면서 수행했으며 마그네틱유속계를 사용해서 수제의 영향을 받지 않으며 벽면의 영향이 가장 적은 수로상류의 중앙지점에서 접근유속을 측정했다. 표면유속을 취득하기 위해 일반디지털카메라로 FHD(1920×1080) 해상도를 가진 영상을 각각의 조건마다 10~20분 촬영했다. 촬영된 영상을 연속된 정지영상으로 변환하고 영상해석 프로그램을 이용하여 표면유속을 도출했다. 표면영상유속계를 활용하여 도출한 결과로 각각 조건에 따라 발생하는 최대유속과 최대역방향유속, 와도(vorticity), 흐름중심선과 단면유속분포의 변화와 발생 위치를 분석했다.