• 한국산림과학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 1976

잣나무 2-1묘(苗)와 방크스소나무 1-1묘(苗)의 생장(生長)에 미치는 밀도효과(密度効果)를 보기 위하여 광릉묘포(光陵苗圃)에서 잣나무의 경우는 $m^2$당 36본에서 324본까지 식재(植栽)하였으며 방크스소나무는 25본에서 169본까지 식재(植栽) 하였다. 실험결과(實驗結果) 묘고(苗高), 근원경(根元經), 건중량(乾重量) 및 규격묘(規格苗) 생산(生産)에 뚜렷한 효과(効果)를 보았다. 잣나무 2-1묘(苗)는 밀식(密植)시킬수록 수고생장(樹高生長)은 증대되고, 방크스소나무는 식재밀도구간(植栽密度區間)에 차이(差異)가 없었다. 잣나무와 방크스소나무는 밀식시킬수록 근원경(根元經) 생장(生長)은 감소되는 경향이 있으나 후자(後者)가 급격히 감소하고 있다. 잣나무의 평균목(平均木) 건중량(乾重量)은 밀식(密植)시킬수록 감소율은 낮으나 방크스소나무는 높다. 밀식(密植)으로 인해 일반적으로 T/R율(率)의 값은 증대되나 식재밀도구간(植栽密度區間)에 큰 차이(差異)가 나타나지 않고 있다. 평균목(平均木)의 잎 뿌리와 줄기의 건중량은 밀식(密植)시킬수록 감소되고 있으나 방크스소나무가 잣나무 보다 감소율이 높다. 그리고 잣나무의 경우는 줄기의 건중량(乾重量)은 밀식구(密植區)와 소식구간(疎植區間)에 차(差)가 적다. 밀식(密植)으로 나타나는 잣나무의 세장성(細長性) 보다는 방크스소나무의 세장성(細長性)이 더욱 높게 나타나고 있으나 밀식(密植)시킬수록 전체적인 물질생산량(物質生産量)은 증대되리라 생각 된다. 이상의 생장특성(生長特性)으로보아 잣나무의 이식상(移植床)을 만들때와 조림(造林)은 밀식(密植)시키도록 하고 방크스소나무는 소식(疎植)함이 효과(効果)적일것으로 생각 된다. 잣나무 2-1묘(苗)의 규격(規格)은 간장(幹長) 18cm 근원경(根元經)은 4mm로 개정(改正)시키고 $m^2$당 이식본수(移植本數)는 묘포비옥도(苗圃肥沃度)에 따라 160~200본(本)으로 함이 적합하리라 생각되며, 방크스소나무 1-1묘(苗)의 규격(規格)은 간장(幹長) 25cm 근원경(根元經) 6mm가 적합하며 $m^2$당 이식본수(移植本數)는 묘포비옥도(苗圃肥沃度)에 따라 100-120본(本)이 적합할 것이다.

• 한국잡초학회지
• /
• 제12권2호
• /
• pp.124-131
• /
• 1992

논에서의 quinclorac [3,7-dichloro-8-quinoline carboxylic acid]이 갖는 후작물(後作物) 영향(影響) 문제(問題)를 감소(減少)시키는 동시에 경지환경(耕地環境) 관리(管理)와 농가경제의 합리화를 위하여 논의 작부양식(作付樣式)과 약제사용시기별(藥劑使用時期別) 약량(藥量) 감축(減縮) 가능성(可能性)을 온실내(溫室內) tray 시험(試驗)을 통하여 비교검토(比較檢討)하였다. 공시(供試)된 논의 작부양식(作付樣式)은 건답직파(乾畓直播), 담수직파(湛水直播), 8 일묘(苗) 이앙(移秧) 및 25 일묘(苗) 이앙(移秧)의 4종(種) 재배양식(栽培樣式)이었고, 약제처리(藥劑處理)는 파종(播種)및 이앙후(移秧後) 0, 5, 10, 15, 20, 25, 30 일(日)의 7 시기(時期) 및 1% 입제(粒劑)를 통한 0, 75, 150, 225, 300, 375, 450, 525, 600g ai/ha의 9수준(水準) 약량(藥量)이었다. 벼(자포니카형 "동진")에 대한 안전최대허용약량내(安全最大許容藥量內)에서 피 (Echinochloa crus-galli)의 완전방제(完全防除) 최소약량(最少藥量)을 산출하여 작부양식(作付樣式) 및 처리시기별(處理時期別)로 비교분석(比較分析)한 결과(結果)는 다음과 같았다. 1. 건답직후(乾畓直後) : 파종후(播種後) 10 일까지의 처리(處理)에서는 150 g ai/ha, 처리시기(處理時期)가 15 일(日)이후 20 일(日)까지 늦어짐에 따라 225g부터 525g ai/ha 까지 증대(增大)되었다. 2. 담수직파(湛水直播) 및 8 일(日)/25 일(日) 묘(苗)의 이앙재배(移秧栽培) : 파종(播種)/이앙後(移秧後) 10 일(日)까지의 처리(處理)에서는 75g ai/ha, 15 일(日) 처리(處理)에서는 150g ai/ha, 20 일(日)이후 30 일(日)까지의 처리(處理)에서는 225g ai/ha 의 약량(藥量)이 요구(要求)되었다.

• 농업생명과학연구
• /
• 제46권5호
• /
• pp.143-152
• /
• 2012

본 연구에서는 온실 운영에 필요한 전력량을 확보함으로서 온실경영비 절감을 목적으로 수평면 일사량, 즉 최대 일사량이 각각 300, 400, 500, 600, 700, 800 및 $900W{\cdot}m^{-2}$ 정도인 날을 기준으로 최대 발전량과 시간의 경과에 따른 태양광발전시스템의 성능을 시험적으로 검토하였다. 태양광발전시스템의 순간 발생전력은 약 970 W정도로서 본 시험에 이용한 태양광발전시스템의 순간 효율은 97% 정도인 것을 알 수 있었다. 본 시스템의 경우, 수평면 일사량이 최소한 $200W{\cdot}m^{-2}$ 이상이 되어야 전력이 발생되는 것을 알 수 있었다. 수평면 일사량이 증가하면 최대 발생전력도 증가하였고, 이 때 최대효율은 각각 약 30, 78, 86 및 90% 정도였다. 그러나 일사량이 약 $800W{\cdot}m^{-2}$정도가 되면 최대 발생전력은 오히려 $700W{\cdot}m^{-2}$ 보다 감소하는 경향이 있었다. 최대전력이 발생되는 효율도 순간 발생전력 97%정도보다 감소하였다. 그리고 일별 수평면 총일사량이 각각 3.24, 8.10, 10.90, 12.70, 14.33, 19.53 및 $21.48MJ{\cdot}m^{-2}$정도 일 때, 총 발생전력량은 각각 0.03, 0.40, 3.60, 4.37, 4.71, 4.70 및 4.91 kWh정도로서 어느 일사량을 경계로 총 발생전력량은 조금 감소하거나 증가하였다. 어레이 배면온도가 전면온도보다 높게 나타나는 경향이 있지만, 일사량이 증가하면 어레이 배면온도도 증가하는 것으로 나타났다. 본 시스템의 경우, 아직까지 모듈의 성능저하는 없는 것으로 나타났다.

• 한국토양비료학회지
• /
• 제44권5호
• /
• pp.688-695
• /
• 2011

우리나라 남부 이모작 논토양의 생산성향상을 위한 합리적인 관리책을 제시코자 영남지역 주요 논 토양별 경반층 생성특성 및 원인을 현지조사 중심으로 수행한 결과는 다음과 같다. 논 토양의 배수등급 및 토성에 따라 총 90필지의 경운실태를 조사한 결과, 경운시기는 대부분 춘경이었고 기종은 중대형 트랙터가 대종을 이루고 있었으며 경운방법은 토양 배수조건이 불량할수록 위탁경운을 하는 경향이었다. 경운깊이와 원추관입 최대저항값 출현깊이와는 고도의 상관을 보였고, 최대저항값 출현 토심은 약 27.1 cm로 조립질 토양에서 다소 깊은 경향으로 원추관입최대저항값은 2.50 Mpa으로 사질 및 사양질 토성이 3.46~3.29 Mpa로 높았고, 경반층의 강도는 세립질토양에서 뚜렷이 높았다. 경반형성 부위의 용적중은 $1.3{\sim}1.5g\;cm^{-3}$로 미사질계 토양이 낮았으며 고상율은 사양질이 미사질에 비해 높아 공극율은 낮은 경향을 보였다. 경반층 직하토층의 유기물, 유효인산, 치환성칼리 함량은 표토에 비해 매우 낮은 경향인 반면, pH와 치환성 석회 및 고토의 함량은 높은 경향이었다. 토층별 토양수분 함량과 원추관입저항값과는 관계는 표토는 부의 상관을 보인 반면 심토는 일정한 경향이 없었다. 경운여부에 따른 논토양 원추관입저항은 토심 20~23 cm에서 큰 차이를 보였고 경운답은 2.03~2.21Mpa인 반면, 무경운답은 1.18~1.25 Mpa로 낮았으며 무경 운 년수가 진행될수록 쟁기바닥층은 없어지는 반면, 토심10 cm 부위에 원추관입저항이 높은 토층이 새로 생성되었음. 따라서 남부 다모작지 논토양 견밀화 (경반화) 토층은 토심 15~20 cm 부위에서 주로 형성되었으며 농작업과 관련성이 높으며 작업 시 토양의 수분조건은 경반화에 크게 영향하며 경반이 생성된 토층의 투수력은 $0.03{\sim}0.14mL\;hr^{-1}$ 매우 낮아 양 수분의 수직이동에 영향을 미치는 것으로 나타났다.

• 현장농수산연구지
• /
• 제21권1호
• /
• pp.61-70
• /
• 2019

이 연구는 국내 환경에 적합한 조사료용 호밀 품종을 개발하기 위하여 실시하였다. 잡종은 1995년에 '조춘호밀' 등 10개 품종을 방임수분으로 혼합 교배하여 육성하였으며, 그 중에서 형질이 우수한 'SR95POP-S1-523-1-5-5-4-7-3-B-16-3-19' 계통을 선발하였다. 선발계통에 대해 2011년부터 2년간 생산력검정을 실시하였고, 그 특성이 우수하여 '호밀55호'로 계통명을 부여하고 4개 지역에서 3개년간 지역적응성을 검정하였으며, 2015년에 신품종으로 선정됨과 함께 '중모2510'으로 명명되었다. 호밀 품종 '중모2510'은 초형이 직립이고, 잎색은 녹색이며, 길이는 짧고, 폭은 넓은 편이다. 줄기는 황색으로 중간 정도의 굵기이며, 종실은 황갈색이고, 중간 크기이다. '중모2510'의 출수기는 4월 16일로 표준품종인 '곡우' 보다 2일 빨랐고, 내한성은 표준품종인 '곡우'와 대등한 수준이었으며, 도복은 '곡우' 보다 강하였다. '중모2510'의 건물수량은 10a당 평균 802 kg (곡우 825 kg), 종실수량은 10a당 481 kg(곡우 493 kg)으로 '곡우' 보다 약간 적었다. '중모2510'의 조단백질 함량은 9.1%로 '곡우' 보다 1.1% 높았으며, ADF와 NDF 함량(%)은 각각 39.8%와 65.5%로 '곡우'보다 낮아 TDN 함량(%)이 57.5%로 '곡우'보다 2.0% 높았으며, TDN 수량 또한 10a당 419 kg으로 '곡우' 보다 높았다. 이 품종은 1월 최저평균기온이 -12 ℃ 이상인 지역에서 월동재배가 가능하며, 특히 녹비용이나 답리작 재배를 통한 조사료 생산에 유용할 것으로 기대된다.

• 한국작물학회지
• /
• 제27권4호
• /
• pp.371-384
• /
• 1982

1. 내냉성품종의 요망은 고위도지대뿐만 아니라 열대지방에서도 간절하며 요망되는 내냉성품종의 특성도 여러 가지이다. 세계적으로 요망되는 내냉성을 IRRI에서는 편의상 a) 북해도형, b) 수원형, c) 태북일기작형, d) 태북이기작형, e) 열대고냉지형 및 f) Bangladesh형으로 구분하고 있다. 우리나라에서 요망되는 내냉성은 통일계품종에서 더욱 간절하며 생육전반에 걸쳐 Japonica 정도의 생리적 활성이 요망되지만 적어도 유묘기와 성숙기의 저온장해가 Japonica보다 크지 않은 것이 우선 당면한 문제라 하겠다. 일반계품종에서는 조생이면서 안정된 기본영양생장성을 가지고 고온에서 과민하지 않고 저온에서 생육지연이 비교적 작은 것이라면 좋을 것이다. 2. 국내에서의 내냉성계통검정방법과 시설은 통일계품종의 출현 이후 급속히 발전되었으며 저온항온기, 냉수 Tank, growth cabinet, phytotron, 춘천의 냉수포장, 진부, 운봉, 영덕의 내냉계통육종포 등 내냉계통선발을 위해서는 비교적 잘 갖춰진 편이다. 국외의 시설로는 IRRI의 냉수 Tank와 세대촉진시설 그리고 Banaue, Kathmandu나 Kashirnir의 자연생태적조건을 우리가 이용할 수 있을 것이다. 참고로 일본에서 보고된 생육각단계에서의 여러 가지 내냉성검정방법을 소개하였다. 3. 내냉성품종들이 가지고 있는 내냉형질의 단리는 아직 분명히 되어 있지 못하지만 a) 저온발아성, b) 저온유묘생장성, c) 저온묘변색 d) 저온발근력, e) 저온분벽력, f) 저온양분흡수능력, g) 저온동화력, i) 저온임실장해, j) 저온등숙장해 등에 품종간차가 분명한 것이 보고되어 있다. 위의 형질간의 상관관계는 형질에 따라 재료에 따라 구구하였다. 내냉성형질들의 유전에 관한 보고는 많지 않아 저온발아력에 관해 4개 이상의 다인자, 유묘저온생존력에 관해 단인자 또는 다인자, 유수형성기 저온저항력에 관해 4개 또는 그 이상의 다인자, 냉수포장에서의 저온저항력에 관해, 4개 이상의 유전자가 관여되는 것으로 그리고 heritability는 항상 높은 것으로 보고되어 있지만 같은 그 재료들을 가지고 다른 저온에서 검토하면 상이한 결과가 나올 것은 쉽게 짐작할 수 있다. 여러 가지 내냉성검정기술의 발전과 IRRI의 국제 내냉성품종연락시험으로 Japonica, Indica, Bulu 등에서 다같이 많은 품종들이 내냉성모본으로 검정되어 있다. 4. 육종방안을 구상할 때 고려해야 할 사항들 a) 유전질의 다양화, b) 내병충성의 집적, c) 지역별 적응품종의 동정, d) 장려품종의 체계적 통제 등을 고려하면서 단기적 및 장기적 육종방안을 제안하였다. 단기적으로는 일반계품종을 대상으로 하되 우리나라 기존품종을 기초로 알려진 내냉성품종을 가지고 생육일수와 내냉성을 조정하는 한편 극조생내냉성 찰벼모본에 내충내병인 Indica 모본을 일회친으로 Japonica로 Back cross하면서 내병충성을 유지한 계통을 선발하여 이것으로 내냉조합에 내병충성을 첨가시키도록 한다. 장기적 방안으로는 Japonica뿐만 아니라 Indica, Javanica 등 모든 내냉성모본을 이용하여 germplasm의 다양화를 꾀하며 모본별 형질별 내냉성유전자를 동정하여 이들을 종합하여 생육전기간을 안정하게 경과할 수 있게 내냉성을 향상하고 내병충성을 첨가하는 단계적인 과정을 제안하였다. 육종효율을 높이기 위하여 세대촉진, 화분배양과 국제협력의 필요성을 강조하였다.

• 한국응용곤충학회지
• /
• 제16권3호
• /
• pp.171-179
• /
• 1977

1975년의 벼멸구 대발생에 의한 극심한 피해에 감하여 그 발생을 예찰할 수 있다면 정부의 이에 대한 방제대책 및 살충제의 약종$\cdot$제제형태를 결정해야 할 농약수급계획 수립에 도움이 될 것이다. 현재 예찰방법은 전국 47개소의 예찰소에서 채집된 벼멸구를 유일한 자료로 삼고 있다. 벼멸구 발생의 신빙할만한 기록은 수원에 권업모범장이 설립된 1905년부터 볼 수 있고 그 이전의 해충기록은 삼국사기, 고려사, 문헌비고 등에 "황", "황충", "비황", "충" 등으로 기록되어 있지만 그 정체를 알 수 없었다. 이들 해충에 대해 일본인 학자를 사이에 상반되는 견해가 발표되었는데 Muramatsu, S.(촌송 무)는 고문헌에 나타난 "황"은 풀무치(비황, Locusta migratoria)라고 주장하였고 Okamoto, H.(강본반차랑)는 멸구류라고 단정하였다. 그러나 그들의 주장은 주로 문헌비고에 근거를 둔 것 같다. 설사 삼국사기, 고려사 등을 참고했다 하더라도 이들 문헌은 문헌비고나 다름없이 해충에 대한 기술이 극히 간략하다. 예를 들면 "7월 황", "추구월황해곡", "오월유항충"등으로 기재되어 있다. 따라서 이것만으로 해당해충의 정확한 이름을 알아내기는 어려운 일이다. 필자는 1967년에 벼멸구의 대발생이 태양흑점 활동최소기와 상관이 있다고 발표한 바 있다. 그러나 양자간의 상관관계를 논하기에는 자료의 량이 충분치 못한 감도 있어 이를 보충하기 위해 벼멸구의 발생기록을 조선왕조실록에서 찾기로 하고 아울러 삼국사기, 고려사, 문헌비고 등에 나타난 해충기록들을 분석해 보았다. 고기록의 해충명을 정확하게 파악하는 일이 선결문제가 되기 때문이다. 분석의 결과 밝혀진 해충은 1. 솔나방(Dendrolimus spectabils) 2. 멸강나방(Mythimna separata) 3. 벼멸구(Nilapavata lugens) 4. 흰등멸구(Sogatella furcifera) 5. 풀무치(Locusta migratoria) 6. 이화명나방(Chilo suppressalis) 7. 땅강아지(Cryllotalpa africana) 8. 벼뿌리바구미(Echinocnemus squameus) 9. 거세미나방(뗘탬 segetum) 10. 뽕나무명나방(Margaronia pyloalis)의 10종이었고, 종명 미군종이 19건이었다. 그런데 문제의 벼멸구가 조선와조실록중에 기록된건수는 놀랍게도 겨우 5건에 불과하며 그 발생년도 또한 서기 1458년, 1468년, 1489년, 1536년, 1587년로서 태양흑점의 관측이 근대적 방법으로 이루어지기 시작한 1719년대 이전의 사실이었다. 따라서 양자간의 상관관계를 밝히는데 도움이 되지는 못하였다. 그러나 본 연구기간 중 필자의 주장을 뒷받침 해 주는 중요한 새로운 정보를 입수할 수 있었다. 즉 1946년에 흰둥멸구의 대발생으로 충남, 전남지방에 피해가 심했으며 그중 피해액이 밝혀진 곳은 라주군에서 16만석, 서산군에서 19만석이었다. (당시 농사시험장 곤충담당관 이봉우씨 담, 현재선 교수 전) 1910년 이후의 우리나라에서의 벼멸구 생기록을 보면 항상 흰등멸구와 함께 발생하고 있으며 최근의 예찰등성적을 보아도 함께 나타나 있고, 해에 따라 1975년도와 같이 벼멸구가 대발생하는 수도 있고 1977년도와 같이 흰등멸구가 대발생하는 경우가 있다. 벼멸구와 흰등멸구는 모두 우리나라 재래의 해충이 아니며 해마다 중국본사에서 비래하는 곤충이다. 한편 태양흑점이 실측되기 시작한 1710년대부터 현재까지는 그 활동이 11.2년의 주기성을 보여주지만 그 이전에 있어서는 그 활동이 극히 약화되었을 뿐만 아니라 매우 불규칙하다는 것이 Schneider와 Mass(1975)에 의해 밝혀졌다. 결국 1710년대부터 현재까지 우리나라에 있어서 벼멸구와 흰등멸구의 대발생 연도는 1910년, 1921-23년, 1946, 1967-8년, 1975-7년의 5회가 되며 이들 대발생 연도는 모두 태양흑점 활동최소기와 일치되어 필자의 주장의 신빙성이 더해졌다. 따라서 앞으로 태양흑점의 활동이 현재와 같은 주기로 계속되는 동안은 그 활동최소기에 임해서는 벼멸구와 흰등멸구에 대해 특별한 경계가 필요하며 만전의 방제체제를 갖추어야 할 것이다.

• 한국수산과학회지
• /
• 제15권1호
• /
• pp.1-25
• /
• 1982

우리나라 남서부에 위치한 대표적 인공호인 옥정호에서 1980년 5월부터 1981년 8월까지 16개월 동안 매월 호소의 이화학적 요인들과 동식물 Plankton의 계절적 변동과 수직적 변동, 그리고 어류상 등을 조사하여 종합적인 육수생물학식 연구를 시행하였다. 표층수의 수온은 8월에 최고 $28.2^{\circ}C$, 1월과 2월에 최저 $3.5^{\circ}C$였다. 저층인 수신 40m 깊이의 수온은 9월이 최고 $8.5^{\circ}C$, 2월에 최저 $3.5^{\circ}C$로서 그 차이는 $5^{\circ}C$였다. 수온 만화에 따른 수온 탁층의 분포 및 수직 안정도를 보면 11월부터 3월까지 저수온기에는 완전 수직혼합이 일어나며 2월에는 표층에서 저층까지 모두 $3.5^{\circ}C$였다. 4월부터 6월까지 표층수 수온의 상승으로 인하여 표층부터 l0m 수신의 층까지에 걸쳐 양층이 형성되며, l0m 이하의 저층수는 $5.6\sim7.1^{\circ}C$의 범위로 성층이 생겼다. 고수온의 표층은 점점 깊어져 $7\sim10$월에는 $15\sim25m$ 수신에 수온탁층이 형성되어 수직 혼합이 일어나는 표층과 안정된 저층으로 구분되었다. 8월의 표층수는 $28.2^{\circ}C$, 저층수온도 상당히 상승되어 9월에는 $8.5^{\circ}C$까지 상승하여 호수의 혼합이 의외로 큰 것을 알 수 있었다. pH의 년중변화는 표층에서 6.8(1월)$\sim$9.0(8월)의 범위이며, 중층에서는 $6.5\sim7.0$, 저층에서는 $6.0\sim7.5$ 였다. DO는 년중 보화상태였고, 저수온기인 겨울철에는 약간 과보화 상태였으며, 년중 각 DO의 약층은 나타나지 않아, 저층까지 DO양은 비교적 높았다. 투명도는 최고가 2월에 4.6m 였고, 최저가 8월에 1.7m 였으며 1980년 8월의 예비조사시에도 8월에 0.9m로 조사기간중 최하였다. 이렇게 낮은 투명도는 이 때 최대로 번모한 Anabaena spiroides, Melosira granulata 등 때문인 것으로 생각된다. 염소양, 지산태 지소, COD, 인산염의 분석결과는 1980년의 값에 비하여 1931년의 값이 다소 증가된 경향을 보인다. 또 칼슘, Mg, Fe와 같은 무기물질들의 분석결과로 보아 옥정호의 수질은 연수로 평가되었고 크룸이나 수은과 같은 중금속물질들도 극히 미양 검출되었다. 조사기관신 본 호에서 채집된 Plankton의 출현종은 모두 7과 72속 107종이었다. 그 중 Phytoplankton은 Cyanophyta가 12종, Bacillariophyta 19종, Chlorophyta 23종이었고, Zooplankton은 Protozoa14종, Rotifera 29종, Cladocera 4종, Copepoda 6종이었다. Phytoplankton의 생산은 $7\sim10$월의 대번식(Peak는 10월 $1,504\times10^3\;cells/l$)과 $1\sim4$월의 소번식(Peak2월 $236\times10^3\;cells/l$)의 2회의 Peak를 나타냈다. Phytoplankton의 종 조성 만화의 양상을 보면 Melosira granulata, Anabaena spiroides와 같이 고수온기인 $7\sim10$월에 번무하는 무리, Asterionella gracillima, Synedra acus, S. ulna와 같이 저수온기에 다양 출현하여 겨울철에 번무하는 무리, 그리고 Microcystis aeruginosa, Ankistrodesmus falcatus와 같이 소양씩 주년 출현하는 세 무리로 대별할 수 있다. Zooplankton의 종 조성 및 출현 양상을 보면 주요 종들은 Thermocyclops taihokuensis, Difflugia corona, Bosmina longirostris, Bosminopsis deitersi, Keratella quadrata, Asplanchna priodonta, A. herricki 등이며, 이들은 $10\sim11$월부터 익년 2월 혹은 4월까지의 저수온기에 출현이 없거나 있어도 매우 적었다. 수직 일견변동은 주로 Microcystis aeruginosa, M. incerta, Anabaena spiroides, Melosira granulata, Bosmina longirstris에 의하여 나타났다. 특히 M. granulata는 일몰과 더불어 저층으로 밀집하는 이동을 했으며 B. longirostris는 일몰과 더불어 표층으로 부상하고 일출과 더불어 전 수층에 확산되는 양상을 보였다. 본 호에서 채집된 어류는 10과 31속 41종이었다. 그 중 Pseudoperilampus uyekii와 Coreoleuciscus splendidus를 포함한 13종의 어류는 한국 특산종으로 우리나라의 다른 호소들에 비하여 어류상이 다양하였다.

• 유통과학연구
• /
• 제8권3호
• /
• pp.49-56
• /
• 2010

At the initial stage of Internet advertising, banner advertising came into fashion. As the Internet developed into a central part of daily lives and the competition in the on-line advertising market was getting fierce, there was not enough space for banner advertising, which rushed to portal sites only. All these factors was responsible for an upsurge in advertising prices. Consequently, the high-cost and low-efficiency problems with banner advertising were raised, which led to an emergence of keyword advertising as a new type of Internet advertising to replace its predecessor. In the beginning of 2000s, when Internet advertising came to be activated, display advertisement including banner advertising dominated the Net. However, display advertising showed signs of gradual decline, and registered minus growth in the year 2009, whereas keyword advertising showed rapid growth and started to outdo display advertising as of the year 2005. Keyword advertising refers to the advertising technique that exposes relevant advertisements on the top of research sites when one searches for a keyword. Instead of exposing advertisements to unspecified individuals like banner advertising, keyword advertising, or targeted advertising technique, shows advertisements only when customers search for a desired keyword so that only highly prospective customers are given a chance to see them. In this context, it is also referred to as search advertising. It is regarded as more aggressive advertising with a high hit rate than previous advertising in that, instead of the seller discovering customers and running an advertisement for them like TV, radios or banner advertising, it exposes advertisements to visiting customers. Keyword advertising makes it possible for a company to seek publicity on line simply by making use of a single word and to achieve a maximum of efficiency at a minimum cost. The strong point of keyword advertising is that customers are allowed to directly contact the products in question through its more efficient advertising when compared to the advertisements of mass media such as TV and radio, etc. The weak point of keyword advertising is that a company should have its advertisement registered on each and every portal site and finds it hard to exercise substantial supervision over its advertisement, there being a possibility of its advertising expenses exceeding its profits. Keyword advertising severs as the most appropriate methods of advertising for the sales and publicity of small and medium enterprises which are in need of a maximum of advertising effect at a low advertising cost. At present, keyword advertising is divided into CPC advertising and CPM advertising. The former is known as the most efficient technique, which is also referred to as advertising based on the meter rate system; A company is supposed to pay for the number of clicks on a searched keyword which users have searched. This is representatively adopted by Overture, Google's Adwords, Naver's Clickchoice, and Daum's Clicks, etc. CPM advertising is dependent upon the flat rate payment system, making a company pay for its advertisement on the basis of the number of exposure, not on the basis of the number of clicks. This method fixes a price for advertisement on the basis of 1,000-time exposure, and is mainly adopted by Naver's Timechoice, Daum's Speciallink, and Nate's Speedup, etc, At present, the CPC method is most frequently adopted. The weak point of the CPC method is that advertising cost can rise through constant clicks from the same IP. If a company makes good use of strategies for maximizing the strong points of keyword advertising and complementing its weak points, it is highly likely to turn its visitors into prospective customers. Accordingly, an advertiser should make an analysis of customers' behavior and approach them in a variety of ways, trying hard to find out what they want. With this in mind, her or she has to put multiple keywords into use when running for ads. When he or she first runs an ad, he or she should first give priority to which keyword to select. The advertiser should consider how many individuals using a search engine will click the keyword in question and how much money he or she has to pay for the advertisement. As the popular keywords that the users of search engines are frequently using are expensive in terms of a unit cost per click, the advertisers without much money for advertising at the initial phrase should pay attention to detailed keywords suitable to their budget. Detailed keywords are also referred to as peripheral keywords or extension keywords, which can be called a combination of major keywords. Most keywords are in the form of texts. The biggest strong point of text-based advertising is that it looks like search results, causing little antipathy to it. But it fails to attract much attention because of the fact that most keyword advertising is in the form of texts. Image-embedded advertising is easy to notice due to images, but it is exposed on the lower part of a web page and regarded as an advertisement, which leads to a low click through rate. However, its strong point is that its prices are lower than those of text-based advertising. If a company owns a logo or a product that is easy enough for people to recognize, the company is well advised to make good use of image-embedded advertising so as to attract Internet users' attention. Advertisers should make an analysis of their logos and examine customers' responses based on the events of sites in question and the composition of products as a vehicle for monitoring their behavior in detail. Besides, keyword advertising allows them to analyze the advertising effects of exposed keywords through the analysis of logos. The logo analysis refers to a close analysis of the current situation of a site by making an analysis of information about visitors on the basis of the analysis of the number of visitors and page view, and that of cookie values. It is in the log files generated through each Web server that a user's IP, used pages, the time when he or she uses it, and cookie values are stored. The log files contain a huge amount of data. As it is almost impossible to make a direct analysis of these log files, one is supposed to make an analysis of them by using solutions for a log analysis. The generic information that can be extracted from tools for each logo analysis includes the number of viewing the total pages, the number of average page view per day, the number of basic page view, the number of page view per visit, the total number of hits, the number of average hits per day, the number of hits per visit, the number of visits, the number of average visits per day, the net number of visitors, average visitors per day, one-time visitors, visitors who have come more than twice, and average using hours, etc. These sites are deemed to be useful for utilizing data for the analysis of the situation and current status of rival companies as well as benchmarking. As keyword advertising exposes advertisements exclusively on search-result pages, competition among advertisers attempting to preoccupy popular keywords is very fierce. Some portal sites keep on giving priority to the existing advertisers, whereas others provide chances to purchase keywords in question to all the advertisers after the advertising contract is over. If an advertiser tries to rely on keywords sensitive to seasons and timeliness in case of sites providing priority to the established advertisers, he or she may as well make a purchase of a vacant place for advertising lest he or she should miss appropriate timing for advertising. However, Naver doesn't provide priority to the existing advertisers as far as all the keyword advertisements are concerned. In this case, one can preoccupy keywords if he or she enters into a contract after confirming the contract period for advertising. This study is designed to take a look at marketing for keyword advertising and to present effective strategies for keyword advertising marketing. At present, the Korean CPC advertising market is virtually monopolized by Overture. Its strong points are that Overture is based on the CPC charging model and that advertisements are registered on the top of the most representative portal sites in Korea. These advantages serve as the most appropriate medium for small and medium enterprises to use. However, the CPC method of Overture has its weak points, too. That is, the CPC method is not the only perfect advertising model among the search advertisements in the on-line market. So it is absolutely necessary that small and medium enterprises including independent shopping malls should complement the weaknesses of the CPC method and make good use of strategies for maximizing its strengths so as to increase their sales and to create a point of contact with customers.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.