• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.3-7
• /
• 2001

$M\"{o}ssbauer$ spectra of the $Ni_{1+x}Ti_xFe_{2-2x}O_4$ systems ($0{\leqq}x{\leqq}0.7$), which appear as single phase spinel structure, were examined at RT. The $M\"{o}ssbauer$ spectra reveal two sextet for $0{\leqq}x{\leqq}0.3$, two sextet and a doublet for $0.4{\leqq}x{\leqq}0.6$, and a doublet for x=0.7 As x increases, the area ratio of B-site and A-site($A_B/A_A$) of the sextet decreases, and the area ratio of the doublet and the total areas($A_{doublet}/A_{tot.}$) increases. The isomer shift(I.S.) of A-site slightly increases and magnetic hyperfine fields($H_{hf}$) of two sites decrease as the increasing x. From these results, we have obtained the cation distributions of the samples and concluded that the increasing x leads to the decrease of covalency of $Fe^{3+}-O^{2-}$ bond in A-sites and A-B superexchange interactions.eractions.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.376-382
• /
• 1981

The rates and the activation parameters for the reaction of phenacyl bromide with substituted anilines in methanol and dimethylformamide were measured. The effects of substituted anilines were discussed. The rate of the reaction was increased with the electron donating power of substituent and showed larger value in DMF than in MeOH. The isokinetic relationship was shown between ${\delta}H^{\neq}$ and ${\delta}S^{\neq}$, isokinetic temperature was 539 and $400^{\circ}C$ in MeOH and DMF respectively, but p-nitro aniline was deviated from linearity in both solvents caused by solvent effects. The excellent linear relationship between log k and p$K_a$ of substituted anilines was observed by following equation. log k = 0.57p$K_a$-1.28 (r = 0.996) in MeOH at $45^{\circ}C$, log k = 0.65p$K_a$-0.88 (r = 0.970) in DMF at $45^{\circ}C$. From the Hammett plot, this reaction was a nucleophilic displacement of aniline to phenacyl bromide and the following equation was obtained at $45^{\circ}C$. log k/$k_0$ = -2.00${\sigma}$ + 0.06 (r = 0.985) in MeOH; log k/$k_0$ = -2.22${\sigma}$ + 0.08 (r = 0.995) in DMF. Large deviation of p-nitro aniline in DMF is resulted from solvent effects too. From above results, the substituent effect of this reaction can be described as $S_N2$ mechanism and bond formation more proceeds in DMF relative to MeOH.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.205-211
• /
• 1992

The $2{\nu}_{C=0}$ + amide III combination band spectrum of acetamide (AA) was obtained in very dilute solutions of AA+lanthanide shift reagents (LSR) in carbon tetrachloride over the range of $15^{\circ}$ to $45^{\circ}C$. It was found that only 1 : 1 AA-LSR complex is formed by the interaction between carbonyl oxygen of AA and central metal ion(Ln(Ⅲ)) in LSR. The thermodynamic parameters for Ln(III)${\cdot}$O=C bond were determined by computer analysis of concentration and temperature dependent spectra. ${\Delta}H^{\circ}$ for the coordination of AA to Eu$(dpm)_3$, Yb$(dpm)_3$, and Pr$(dpm)_3$ have been found to be -39.1, -28.4, and -25.5 kJ/mol, respectively. It has shown that this type of ion-dipole interaction is more than twice stronger compared to the dipole-dipole interaction in the amide linkage, and largely depending on the steric hindrence effect by the bulky dpm groups around central metal ion (Ln(III)) rather than the ionic potential effect of central metal ion itself.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.553-558
• /
• 2003

The crystal structure of $[n-Bu_4N]_2[Mo_6O_{19}]$(TBAM) (n-Bu4N=tetrabutylammonium) has been determined by X-ray crystallography. It crystallizes in the monoclinic system, space group C2/c, with lattice parameters ${\alpha}$=16.314(5), b=17.288(5), c=17.776(4)${\AA}$ ${\beta}$=101.47(3), and Z=4. In $[Mo_6O{19}]^{2-}$ anion, Mo atoms occupy six vertices of octahedron and each Mo atom is coordinated by six oxygen atoms to adopt distorted octahedral coordination geometry. The average bond distance of Mo-Ot (terminal), Mo-Ob (bridged) and Mo-Oc (central) are 1.680 ${\AA}$, 1.931 ${\AA}$ and 2.325 ${\AA}$ respectively. In $[n-Bu_4N]^+$ cation, the N atom possesses a slightly distorted tetrahedral geometry. There are some potential extensive C-H ${\cdots}$ O hydrogen bonds in the lattice, by which connecte molecules and stabilize the crystal structure. Thermogravimetric analysis suggests that thermal decomposition of the title compound includes two transitions and it loses weight at 356.0 and 803.5 $^{\circ}$, respectively, and the residue presumable be $Mo_2O_2$. Accordingly, the title compound has high thermal stability.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.51-57
• /
• 2016

In this study, we synthesized reactive surfactant which have functional radical group for effective chemical reaction. Reactive surfactant have been synthesized using synthesis of polyoxyethylene lauryl ether(POE 23) which is nonionic surfactant and methacrylic acid, acrylic acid. benzene was used as the solvent, p-TsOH was used as the catalyst. synthesized surfactant was confirmed by FT-IR, $^1H$-NMR spectra, and elemental analysis. Evaluation of physical properties was measured HLB, cloud point, surface tension, the critical micelle concentration, emulsifying power. HLB number was evaluated 11.62 to 12.09 range. The Critical Micelle Concentration(cmc) values evaluated was $1{\times}10^{-4}{\sim}5{\times}10^{-4}mol/L$ by surface tension method. The cloud point was $35^{\circ}C$, $39^{\circ}C$ each. The emulsifymvcqa ing properties of the synthesized surfactants was lower than polyoxyethylene lauryl ether. In addition, soybean oil was better than benzene. The experimental results confirmed the ester bond, the yield of 93.27%, 94.49% was found.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.565-574
• /
• 1985

The rates of reaction between 4-substituted-2,6-dinitrochlorobenzenes with para-substituted anilines in methanol-acetonitrile mixtures were measured by conductometry. It was observed that the rate constant increases in the order of X = 4-$NO_2 {\gg}4-CN {\gg}4- CF_3$, where X is a substituent in the substrate. The rate constant also increases in the order of Y = p-O$CH_3{\gg}p- CH_3{\gg}H {\gg}p-Cl{\gg}m- NO_2$, where Y is a substituent in the aniline ring. Kinetic studies in the methanol-acetonitrile solvent system with various nucleophiles showed that the N-C bond forming step is making a great contribution to the overall second order rate constant. The electrophilic catalysis by methanol probably consists of the hydrogen bonding between alcoholic hydrogen and leaving chloride in the transition state. The nucleophilic catalysis by methanol may be ascribed to the formation of hydrogen bonds between alcoholic oxygen and hydrogens of amines in the transition state. All these experimental facts are supporting the operation of $S_N$Ar machanism with the second step being the rate determining. This mechanism can be successfully fitted to the PES model.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.812-817
• /
• 1992

Fluorometholone $(C_{22}H_{29}FO_4)$, M.W. = 376.5, monoclinic, $P2_1$, a = 6.410(4), b = 13.431(3), c = 10.996(3)$\AA$, $\beta$ = 92.81$(3)^{\circ}$, Z = 2, F(000) = 404, T = 292K, $\lambda$(Mo-$K_\alpha$) = 0.7107$\AA$, $\mu$ = 0.57$cm^{-1}$, $D_c$ = 1.32 $g/cm^3$, $D_m$ = 1.31 $g/cm^3$ and final R = 0.032 for 1769 observed reflections. All bond lengths and angles are within normal limits. Ring A is almost planar, B ring has a highly symmetrical chair conformation and C ring is in a distorted chair conformation. Ring D is in a intermediate conformation between 13$\alpha$-14$\beta$-half-chair and 13$\alpha$-envelope. Torsion angle C(16)-C(17)-C(20)-O(20) of $-7.9^{\circ}$ is a lower value than those of $-31.9^{\circ}$ and $-16.5^{\circ}$ for 9-fluoro-6-methylprednisolone I and II respectively.

• Journal of the Korean Chemical Society
• /
• v.37 no.6
• /
• pp.599-603
• /
• 1993

Crystal structure of bis(1,2-diaminopropane)palladium(II) bis(oxalato)palladate(II) has been determined by X-ray crystallography. Crystal data: $Pd_2C_{10}H_{10}N_{4}O_{8}$, $M_W$ = 573.09, orthorhombic, space group $P_{ccn}$ (No = 56), a = 16.178(5), b = 16.381(6), c = 6.685(2)$\{AA}$, V = 1771.6 $\{AA}^3$, $M_W$W = 573.09, $D_c$ = 2.014 g${\cdot}c\;m^{-3}$, Z = 4, T = 294K, F(000) = 1056.0 and $\mu$ = 20.466 c$m^{-1}$. The intensity data were collected with $Mo-K\alpha$ radiation (${\lambda}$ = 0.7107 $\AA)$ on an automatic four-circle diffractometer with a graphite monochromater. The structure was solved by Patterson method and refined by full matrix least-squares methods using Pivot weights. The final R and S values were R = 0.065, $R_W = 0.059, R_{all}$ = 0.065 and S = 4.315 for 605 observed reflections. Both cation and anion complexes are essentially planar and have dihedral angle of $18(l)^{\circ}$ between thier planes. In the crystal structure, they do not have the Magnus's salt type mixed stacks; instead, the complex anions form regular stacks along the c-axis with the M-M bond length of $3.343(5)\AA$ and their stacks are surrounded by the complex cations through hydrogen bonds with the nitrogen-oxygen distances of 2.94(3) and $3.31(4)\AA.$

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.57-62
• /
• 2020

Among the sewage pipes installed in Korea, the length of concrete pipes exceeding 20 years is 66,334 km (42.5%). Deteriorated concrete sewer pipes need to be repaired due to the leakage of internal sewage, which causes problems such as sink holes by expanding the cavity around the pipeline. In this study, we tried to apply anti-washout underwater mortar with ultra rapid hardening cement and segregation reducing agent to sewage pipe repair. As a result of the setting time test, the final set time was delayed by up to 172% by incorporating segregation reducing agent. In the test for measuring the degree of mortar segregation in water, it was measured at pH 12 or less under all mixing conditions. In addition, the suspension amount was measured to be 50 mg / l or less to satisfy the KCI-AD102 standard by incorporating a segregation reducing agent. In terms of the average value of mortar compressive strength, by incorporating segregation reducing agent, the strength of the specimens produced in air was more than 80% of that of the specimens produced in water. Conversely, the bond strengths of the specimens produced in water were measured to be higher than those of the specimens produced in air. Water resistance was evaluated by measuring water absorption and water permeability. Water absorption and water permeability were reduced by 42.6% and 36.6%, respectively, by mixing segregation reducing agent.