• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1383-1388
• /
• 2008

Because of high growth rate and large deposition of fat in the abdomen, the chicken has been used as a model organism for understanding lipid metabolism, fattening and growing. In this study, differentially expression of proteins in chicken liver, one of the important organs for lipid metabolism, has been investigated at four different growing stages. After separation of proteins using two-dimensional electrophoresis (2-DE), more than 700 protein spots were detected. Among them, 13 growing stage specific proteins in chicken liver were selected and further investigated by matrix-assisted laser adsorptions ionization-time of flight mass spectrometry (MALDI-TOF MS). Of these, 12 proteins were matched to existing proteins based on a database search. The identified fat-related proteins in this study were fatty acid synthase (FASN) and malic enzyme (ME1). These proteins were more highly expressed at week 32 than at other weeks. In order to confirm the differential expression, one of the proteins, FASN, was confirmed by western blotting. The identified proteins will give valuable information on biochemical roles in chicken liver, especially for lipid metabolism.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.329-345
• /
• 2015

As commonly known, sensor errors and faulty signals may potentially lead structures in vibration to catastrophic failures. This paper presents a new approach to deal with sensor errors/faults in vibration control of structures by using the Fault detection and isolation (FDI) technique. To demonstrate the effectiveness of the approach, a space truss structure with semi-active devices such as Magneto-Rheological (MR) damper is used as an example. To address the problem, a Linear Matrix Inequality (LMI) based fixed-order $H_{\infty}$ FDI filter is introduced and designed. Modeling errors are treated as uncertainties in the FDI filter design to verify the robustness of the proposed FDI filter. Furthermore, an innovative Fuzzy Fault Tolerant Controller (FFTC) has been developed for this space truss structure model to preserve the pre-specified performance in the presence of sensor errors or faults. Simulation results have demonstrated that the proposed FDI filter is capable of detecting and isolating sensor errors/faults and actuator faults e.g., accelerometers and MR dampers, and the proposed FFTC can maintain the structural vibration suppression in faulty conditions.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.799-802
• /
• 2004

There are many methods in controlling inverter's voltage and currents. most of all, PI control method is a general method. PI control has some merits. But, PI control has zero effect. So, steady-state response errors always exist by the zero effect. For removing the steady-state error, This paper presents the modeling, design and analysis of the double loop feedback control scheme. and computing the value of parameters and applying In the single-phase full bridge inverter for comparison and analysis between the PI control and PDFF control. The system model is employed to examine the dynamics of power circuit and select appropriate feedback variables for stable operation of the closed-loop UPS inverter system. It analyzes and proves the output characteristic of inverter system with the PDFF control.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.4 no.1
• /
• pp.1-34
• /
• 1967

The wave-cancelling effects of a large bulbous bow on the coastal passenger boat have been investigated in deep and shallow water. The following characteristics have been cleared through resistance tests with the model of the Korea standard type coastal passenger vessel(LWL=25.8m, B=5.5m, T=1.65m) equipped with large bulbous bows of various sizes. (1) Over the range of Froude Number 0.30, the wavemaking resistance coefficients decrease 30% or more. (2) The optimum location of bulb center is around 8% L from F.P. (3) On the 120 G.T. passenger coaster which has a speed corresponding to Froude Number 0.34, the most advantageous bulb is the one whose $a_0/L$ is about 0.28. When the speed is up, the bulb radius should be increased accordingly. (4) The large bulbous bows are effective in shallow water to a water depth of H/T=2.0. (5) Tendency to the increase in the resistance of the hull with large bulbous bow in the shallow water is generally smaller than that of the hull without bulb.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.53-60
• /
• 1999

Prior to sea trials, dock trials are usually carried out in order to check the main propulsion system and auxiliaries. At that time the motion of a ship is limited by mooring ropes. In Hyundai Heavy Industries, a simple equation is used to obtain propeller thrust which is used as an input data of mooring analysis. Recently the ship size and the engine power become larger. Therefore a careful analysis of the mooring condition is necessary in order to avoid possible accidents. In this study propeller thrust at deck trials is reviewed and examined through a series of model tests.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2001

The greenhouse heating system using solar energy has been realized in the protective agriculture in this study in order to analyse the thermal energy characteristics of the system the effects of ambient air temperature, solar radiation, relative humidities and water content of ambient air on the greenhouse air temperature were investigated through computer simulation experimental analysis for validation of the simulation. The results from this study are summarized as follows: 1) The expected values of inside air temperature for the system solar energy were very much close to the experimental values. 2) In the system using solar energy, the expected values of daytime surface temperature of soil by computer simulation were very much similar to the measured values, but those of nighttime were higher than the measured value by almost $2.5^{\circ}C$. 3) Heat loss of daytime was found to be larger than that of night time as much as 2.0 to 4.2 times for the system using solar energy. 4) In the system using solar energy. while the ambient air temperature varied between $-7^{\circ}C$ and $-3.8^{\circ}C$, the temperature of the inside air was maintained between $0^{\circ}C$ and $22^{\circ}C$. 5) At the minimum ambient temperature of $-7^{\circ}C$, the temperature of the inside air was $0^{\circ}C$.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.157-166
• /
• 2016

The aims of this study are to contribute to efficient revenue management by analysis of the scale in elderly long-term care facilities. The data was used for input of the elderly long-term care costs Scale, and calculated the staffing standards and social welfare facilities workers with living wage guidelines in the Department of Health and Human Services. Revenue efficiency is the highest order of size are as follows. I8(98 people) \43,517,010, H6(86 people) \36,568,332, G8(78 people) \29,426,532, F8(68 people) \23,227,532, E8(58 people) \19,701,254, D8(48 people) \19,155,187, C6( 36) \14,389,109, B8(28 people) \9,920,031, A8(18 people) \3,721,031. It seems that its revenue efficiency even higher than the larger the scale. Meanwhile, The researchers focused on C6 (36 patients) model. Suggestion of this study are following; First, the arrangement can be provided based on needs of the elderly care facility staffing standards. Secondly, an elderly care facility selected wage guidelines. Thirdly, the elderly efficiency guidelines established by the size of a nursing facility. This study and other financial income factor are not the applicable limits.

• Journal of Environmental Science International
• /
• v.20 no.2
• /
• pp.215-222
• /
• 2011

The adsorption behavior of nitrate nitrogen was investigated from aqueous solution using char prepared from oak chip. The removal rate of nitrate nitrogen was found to be dependent on temperature and it is increased as the temperature increase. Adsorption equilibrium data of nitrate nitrogen on oak char. reasonably fitted Langmuir and Freundlich isotherm models. The adsorption energy obtained from D-R model was 12.5 kJ/mole at $20^{\circ}C$ indicating an ion exchange process as primary adsorption mechanism. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$, and ${\Delta}S^o$ were -23.76 kJ/mole, 26.1 kJ/mole and 89.7 J/K mole at $20^{\circ}C$, respectively, indicated that the nature of nitrate nitrogen adsorption is spontaneous and endothermic.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.195-200
• /
• 2010

Numerical investigation was conducted to study the effects of after-body configurations and nozzle lip on the PIFS(Plume Induced Flow Separation) and eat flux to the base face. Two dimensional and axi-symmetric non-equilibrium Navier-Stoke's solver with $k-{\omega}$ SST turbulence model was used to solve the launching vehicle type configuration with propulsive jet. The experimental result of Robert J. McGhee was compared with our computational results for code validation. Three types of the after-body configurations (Straight, Boat-tail, Flare type) were simulated for this study. And the nozzle lip effect was studies using the three types of base configurations same simulation conditions. As a result of numerical investigations, higher pressure ratio condition and boat-tail after-body configuration caused severe PIFS phenomenon but the flare type after-body configuration and low pressure ratio suppressed PIFS. Flare type after-body configuration and low pressure ratio case reduced heat flux to base face. The nozzle lip dispersed the heat flux widely along the base face and the nozzle lip.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.283-288
• /
• 2010

The characteristics of a condenser dryer and a vented dryer that are common types of domestic clothes dryers for home use are predicted and compared in an effort to improve the efficiency and to overcome economical and environmental problems due to its inefficient power consumption. In the present study, a drying system is simplified by assuming the mechanism is composed of several elements such as heater and drum and mathematical models using the mass and energy conservation of moisture and air through each element are defined. Based on this mathematical model, the computational tool is developed to predict temperature, humidity and enthalpy of moisture and air in a drum and remained moisture contents (RMC) in drying materials. The computational results are verified by comparing with experimental results from existing studies. In addition, the efficiency of a dryer is calculated using these predicted results for a given condition and the drying characteristics of a condenser dryer and a vented dryer are compared and analyzed.