• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2016

Purpose: Mee (Madhuca longifolia) is an economically important tree growing throughout Sri Lanka. Its importance is mainly attributed to its oil with high nutritional and medicinal values. However, an inefficient extraction method limits its use. This study revealed the possibility of extracting oil from mee seeds by using a screw-type oil expeller. Methods: A popular screw-type oil expeller was used in the experiment. Extract bar clearance and speeds of the main spiral shaft were altered to increase the oil expelling efficiency of the machine. The quality of refined oil at the optimum oil yield was determined by measuring the refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity. Results: An optimum yield of 35% oil was obtained when the machine capacity was 30 kg/h and energy consumption was 0.13 kWh/kg. This optimum machine condition was observed at an extract bar clearance of 0.5 mm and a main spiral shaft speed of 90 rpm. The refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity of the oil were 1.4, 203, 59, 3.5%, 0.2%, and 0.907 g/cm3 respectively. Color of the mee oil was closer to yellow, which is revealed by the lightness value (L) of 24.93 and positive value (b) of 11.81. Conclusion: The screw-type oil expeller can be used for economically extracting mee oil on a commercial scale.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.109-114
• /
• 2007

In mass production of seed-potato plantlets, the processes for in vitro propagation and ex vitro acclimatization with a high cost should be improved by a culture system with environmental control using scaled-up culture vessels. The experiment was conducted to design a hydroponic culture system for enhancement of growth and development of seed-potato (Solanum tuberosum) plantlets cultured under photoautotrophic (without sugar in culture medium) conditions with controlled light intensity and ventilation rate. The culture system was consisted of scaled-up culture vessels, ventilation pipes, a multi-cell tray and an environmental control system (ECS) for optimum controlling in temperature, light intensity, ventilation rate, and culture-medium supply. Growth and development of the plantlets was significantly increased under the ECS compared with a conventional culture system (CCS) of photomixotrophic culture (with sugar in culture medium) using small scale vessels. For 21 days, leaf area of the plantlets was expanded more than 2 times, and number of internodes also approximately 4 times greate. under the ECS. In addition, the photoautotrophic growth in sweetpotato (Ipomoea batatas) and chrysanthemum (Chrysanthemum morifolium) plantlets was greater more than 2 times compared with the CCS.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.1035-1041
• /
• 2000

Gamma irradiation was used to improve sanitation and quality of salted and fermented anchovy sauce. For commercial production, comparison with currently using sterilization methods, such as micro-filtration and heat treatment were also conducted. Control was prepared without irradiation and sterilization process. Microbiological, physiochemical, and sensory qualities were analyzed to observe the Quality changes during the storage. Irradiation at 5 kGy or above and micro-filtration process completely eliminated microorganisms detected in this study As irradiation dose increased, the color appeared brighter and irradiation at 5 kGy or above showed similar color L-value to that of sample treated with microfiltration. The color L, a, b-value of heat-treated sample always showed lower. The pH, salinity, and viscosity were sustained during storage. From the results of sensory evaluation, the samples treated with gamma irradiation and microfiltration obtained better scores than control or heat-sterilized. Gamma irradiation to salted and fermented anchovy sauce presented the best quality products among different sterilizing methods, especially at 5 kGy dose. Therefore, gamma irradiation can be successfully applied to commercial large scale production as a new sanitation technology with improved quality.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.642-651
• /
• 2015

Asparagus, which was known to be a good source of dietary fiber and vitamins, has been reported to possess various medical actions such as antioxidant and blood pressure regulating effects. In order to examine the quality and antioxidant characteristics of asparagus, asparagus sponge cakes were prepared with different ratios of freeze dried asparagus powder (0%, 2%, 4%, 6%, 8%, w/w) in this study. With the increase of asparagus powder content in the sponge cakes, the specific gravity and baking loss increased while the dough yield decreased significantly. The moisture contents of the sponge cakes were not significantly different between the control and the cakes prepared with asparagus powder. The pH of the sponge cakes decreased significantly with increased amounts of asparagus powder. Furthermore, the pH of the sponge cake containing 8% asparagus powder was the lowest at 7.49. With the increase of asparagus powder content in the sponge cakes, lightness (L) and redness (a) decreased, whereas yellowness (b) increased. In texture analysis, the hardness and chewiness of the sponge cakes increased as the asparagus powder content increased, while the cohesiveness of the sponge cakes with asparagus powder decreased. Both total polyphenol content and DPPH (1,1-diphenyl-2-picryl hydrazyl) radical scavenging activity increased significantly with increased levels of asparagus powder content in the sponge cakes. In a sensory evaluation using a scale of 1-7, the sponge cake containing 8% asparagus powder had the lowest sensory preference scores. Therefore, the results of this study suggest that sponge cake prepared with 6% asparagus powder is the most appropriate product for quality characteristics.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.59-60
• /
• 2018

The oscillating-water-column wave energy converter represents the complex physical characteristics associated with the water column, turbines, generator, and power converter. This study focuses on the derivation of the physical relationship between the water column and turbine based on the 1/ 4 scale model test. The aerodynamic characteristics of the OWC ducted turbine were simulated using an orifice. The turbine effect, a key element in the OWC-chamber performance evaluation, can be represented by the flow rate and pressure drop through the orifice. The turbine effect of OWC-WEC was confirmed to have a non-linear relationship from the measured flow rate and pressure drop in the model test.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.4
• /
• pp.589-598
• /
• 2000

A pilot-scale Spray Drying Sorber (SDS) system was set up to evaluate the effect of spray characteristics on the desulfurization yield. The size distribution and the Sauter Mean Diameters of slurry droplets were measured in advance using the optical size measurement system, Malvern 2600. The desulfurization yield of the drying chamber by size was measured for the conditions of inlet gas and spray injection. As a reagent, 10% limestone slurry of $Ca(OH)_2$ was treated with flue gas containing $SO_2$, and the combustion gas analyzer and gas detectors were attached to measure the $SO_2$ concentration. With a flow rate of 144 Nm3/h and a temperature range of $200{\sim}300^{\circ}C$, the experiments were performed for the Stoichiometric Ratio (SR) of 1.0 to 3.0 and droplet mean diameter of 6.5 to $34.3{\mu}m$. In case of smaller spray droplets, the desulfurization efficiency improved due to the increase of total droplet surface area, while the reduction in evaporation time reduced the contact time between the droplets and $SO_2$ gas. In some typical region of droplet diameter, this negative effect, reduction of contact time, became dominant and the desulfurization yield decreases the desulfurization yield in spite of the expansion in absorption area. These results revealed that there exists the optimal size of spray droplets for a given state, which is determined by the compromise between the total surface area of slurry droplets and the evaporation time of droplets. The measurements also indicated that the inlet temperature of flue gas changes the optimal injection condition by varying the driving force for evaporation. The results confirm that the effect of the evaporation time of slurry droplets should be considered in analyzing the desulfurization yield as well as the total surface area, for it is a significant aspect of the correlation with the capabilities of $SO_2$ absorption in wet droplets. In conclusion, the optimal condition of spray can be determined based on these results, which might be applied to design or scale-up of SDS system.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.280-286
• /
• 1999

This studies were conducted to evaluate efficiency of microbial inoculator for active composting of food wastes. The Microbial inoculators used in this studies were purchased from different comparise to evaluate their effectiveness for composting of food waste in Korea. The number of bacteria growing at $30^{\circ}C$ in commercial inoculator collected were below $91.0{\times}10^8\;CFU/g$ which were counted from well cured compost made by animal manure. The number of bacteria in commercial microbial inoculator, such as FL, VP, B9, CM and GE were higher than that of composted at $50^{\circ}C$ or $60^{\circ}C$ of incubation temperature. Fungi were counted in GR, VP and B9 as over $10^3CFU/g$ at $30^{\circ}C$ of incubation temperature, while fungi of all the commercial inoculator collected could not grown at $50^{\circ}C$ and $60^{\circ}C$. Actinomycetes in most of the these had higher number($10^5CFU/g$) than that of compost : however, it was not detected at $60^{\circ}C$ incubation temperature from all the samples collected. The amount of carbon dioxid production was order to VP>HU>B9>GE>CM>Control>Compost in the lab scale composting test with or without inoculation of commercial inoculators, however, but the difference in carbon dioxide production was similar among each treatments. The effect of inoculation on composting parmeter such as pH changes, temperature increasing and change of chemicals properties were a little among each treatments, with or without inoculation of commercial inoculator in active composting of food waste. Using commercial inoculator did not show any statistical difference in food waste composting process under various condition such as pH changes, temperature changes, etc.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.2
• /
• pp.142-149
• /
• 2012

This study deals with the investigation of the scale effect for the vertical-axis tidal stream turbine by evaluating the hydrodynamic efficiency of turbine rotors of different diameters at different flow conditions. Numerical analyses are made for the turbine rotors with a same shape, but different sizes obtained using the diameter evaluation equation suggested in this paper. It is shown that the performance of turbine is clearly dependent upon the rotor size and inflow velocity, i.e. Reynolds number dependency of different-scaled turbines showing better efficiency with increasing Reynolds number. The sudden decrease of efficiency is also noticed around the transition region of Reynolds number. The hydrodynamic capacity evaluation method needed at initial stage of turbine design is suggested and exercised with some test cases. It is recommended that the method is expected to be useful for turbines with demanding powers between 10 kW and 300 kW.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.5
• /
• pp.357-367
• /
• 2022

Background: Low-dose dexmedetomidine may be a suitable alternative to opioids for pediatric ambulatory procedures under general anesthesia (GA). However, the recovery profile remains unclear. Herein, we aimed to evaluate the effects of low-dose dexmedetomidine on the recovery profile of children. Methods: Seventy-two children undergoing ambulatory oral rehabilitation under GA were randomly and equally distributed into two groups (D and F). Group D received an infusion of dexmedetomidine 0.25 ㎍/kg for 4 min for induction, followed by maintenance of 0.4 ㎍/kg/h. Group F received an infusion of fentanyl 1 ㎍/kg over 4 min for induction, followed by maintenance at 1 ㎍/kg/h. The primary outcome was the extubation time. The secondary outcomes were awakening time, end-tidal sevoflurane (ET-Sevo) requirement, change in hemodynamic parameters, Richmond Agitation-Sedation Scale (RASS), Children's Hospital of Eastern Ontario pain scale (CHEOPS) score, length of PACU stay, and incidence of adverse events. Results: Statistically significant differences were observed in the recovery profile between the groups: the median time for extubation was 3.65 (3.44-6.2) vs. 6.25 (4.21-7) minutes in groups D vs. F (P=0.001), respectively, while the corresponding awakening times were 19 (18.75-21) and 22.5 (22-24) minutes, respectively (P < 0.001). The mean ET-Sevo was low in group D (1.1 vs. 1.2; P < 0.001). The heart rate was significantly low across all time points in group D, without resulting in bradycardia. The median RASS and CHEOPS scores were also significantly lower in group D. No significant differences were observed in the mean arterial pressure, incidence of adverse events, or length of PACU stay. Conclusion: Low-dose dexmedetomidine was more effective than fentanyl as an opioid substitute at providing a better recovery profile in pediatric ambulatory oral rehabilitation under GA. Dexmedetomidine also significantly reduced sevoflurane consumption without causing adverse events or prolonging hospital stay.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.139-151
• /
• 2017

This study was conducted to confirm the rumen fermentation characteristics of large-scale CoenzymeQ10(CoQ10) producing bacteria R. spharoides in rumen. We conducted in vitro continuous culture test to investigate the characteristics of rumen fermentation with 5% R. spharoides as a direct fed microorganism. A rumen microbial fermentation characteristic has stability at after 12 days for 15 day of experimental period. pH value, NH₃-N, microbial protein synthesis, ADF digestibility and NDF digestibility were not shown significantly differences between control and treatment. However, UDP was significantly higher in treatment than control (p<0.05). CoQ10 concentration was 336.0mg/l with 5% R. spharoides. On the other hands, CoQ10 was not detected without R. spharoides. Our study was shown that R. spharoides can produce CoQ10 in rumen environment without harmful effects on rumen fermentation parameter. CoQ10 in rumen may transfer into cow milk through cow metabolism. This strategy might be helpful for producing functional dairy cow milk.