• 제목/요약/키워드: H-Anim

검색결과 30건 처리시간 0.029초

Partial Sequence of the Bovine (Bos taurus coreanae) Myogenic Factor Encoding Gene MyoD

  • Kim, H.S.;Park, E.W.;Yoon, D.H.;Kim, H.B.;Cheong, I.C.;Cho, B.W.;Im, K.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권5호
    • /
    • pp.689-694
    • /
    • 1999
  • This experiment was carried out to isolate the partial bovine (Bos Taurus coreanae) myogenic factor encoding gene, MyoD, using the rat myogenic factor (MyoD) gene sequence and to compare the gene sequence between another myogenic factor (Myf 5) and MyoD gene of the bovine. To make the probe and isolate the MyoD gene, PCR was performed to amplify rat and bovine MyoD gene including exon I, II and intron I. The homology between mouse and bovine MyoD is high; bovine MyoD gene shows 17 different gene sequence region compared to rat MyoD. Among those, two regions have significant differences; one is the exon I part between 2834 and 2850 bp, the other is intron part between 3274 and 3303 bp of the mouse. At this region homology was 40% in the former and 50% in the latter. Homology between bovine MyoD and Myf5 was 83% in the exon 1. Especially exon I in the Myf5 602-617 bp and 651-683 bp have significant differences. These results suggest that MyoD gene have a similar gene structure in mouse and bovine and MyoD and Myf5 of the bovine, at least in part, have a similar expression and activity.

Effects of Antler Development Stage on Fatty acid, Vitamin and GAGs Contents of Velvet Antler in Spotted Deer (Cervus nippon)

  • Lee, S.R.;Jeon, B.T.;Kim, S.J.;Kim, M.H.;Lee, S.M.;Moon, S.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권10호
    • /
    • pp.1546-1550
    • /
    • 2007
  • This study aimed to provide basic information as the foundation for further studies on the assessment of velvet antler quality by investigating the changes in fatty acid, vitamin A and E, minerals and GAGs contents by development stage of antler in spotted deer (Cervus nippon). Twelve stags (aged 4 to 5 years) were divided into two groups and velvet antler harvested 40 days (FDG) and 60 days (SDG) after casting of the buttons from the previous set. Total saturated fatty acid was lower in FDG than SDG (p<0.05). Total monounsaturated fatty acid, conjugated linoleic acid (p<0.05), polyunsaturated fatty acid and ${\omega}$3 fatty acid were higher in FDG than SDG. The vitamin A content of FDG was higher than that of SDG, but the vitamin E content of FDG was lower than that of SDG (p<0.05). SDG had significantly higher calcium and phosphate content than FDG (p<0.05). The magnesium content showed a similar trend to the contents of calcium and phosphate, but there was no significant difference between SDG and FDG. Uronic acid content was higher in FDG than SDG but there was no significant difference. The contents of GAGs and sialic acid were significantly higher (p<0.05) in FDG than SDG. These results indicated that the longer stage of antler development had lower content of activating components and this lead to a decrease of antler quality.

The Rumen Ecosystem : As a Fountain Source of Nobel Enzymes - Review -

  • Lee, S.S.;Shin, K.J.;Kim, W.Y.;Ha, J.K.;Han, In K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권6호
    • /
    • pp.988-1001
    • /
    • 1999
  • The rumen ecosystem is increasingly being recognized as a promising source of superior polysaccharide-degrading enzymes. They contain a wide array of novel enzymes at the levels of specific activities of 1,184, 1,069, 119, 390, 327 and $946{\mu}mol$ Reducing sugar release/min/mg protein for endoglucanase, xylanase, polygalactouronase, amylase, glucanase and arabinase, respectively. These enzymes are mainly located in the surface of rumen microbes. However, glycoside-degrading enzymes (e.g. glucosidase, fucosidase, xylosidase and arabinofuranosidase, etc.) are mainly located in the rumen fluid, when detected enzyme activities according to the ruminal compartments (e.g. enzymes in whole rumen contents, feed-associated enzymes, microbial cell-associated enzymes, and enzymes in the rumen fluid). Ruminal fungi are the primary contributors to high production of novel enzymes; the bacteria and protozoa also have important functions, but less central roles. The enzyme activities of bacteria, protozoa and fungi were detected 32.26, 19.21 and 47.60 mol glucose release/min/mL mediem for cellulose; 42.56, 14.96 and 64.93 mmol xylose release/min/mL medium after 48h incubation, respectively. The polysachharide-degrading enzyme activity of ruminal anaerobic fungi (e.g. Neocallimastix patriciarum and Piromyces communis, etc.) was much higher approximately 3~6 times than that of aerobic fungi (e.g. Tricoderma reesei, T. viridae and Aspergillus oryzae, etc.) used widely in industrial process. Therefore, the rumen ecosystem could be a growing source of novel enzymes having a tremendous potential for industrial applications.

아바타 모션 편집기를 통한 작업레벨 행위 모델링 및 생성 (Modeling and Creating of Task-level Behavior by Avatar Motion Editor)

  • 김가영;김재경;오재균;임순범;최윤철
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (2)
    • /
    • pp.439-441
    • /
    • 2003
  • 최근 3D 가상환경에서 아바타를 활용한 분야가 많은 관심을 받고 있으며, 아바타를 이용함으로써 사람들의 흥미를 효과적으로 이끌어 낼 수 있는 장점을 가진다. 현재 이러한 아바타의 행위를 생성하고 제어하기 위해 모션캡쳐 장비를 이용하거나 3D MAX와 같은 전문 그래픽 편집툴, 혹은 자체 개발된 특정 어플리케이션등을 사용하고 있다. 그러나 이와 같은 기존 환경은 비용이 많이 들거나 생성된 아바타 행위의 활용이 특정 어플리케이션 환경에 국한되어 재사용이 어려운 단점이 있다. 본 연구에서는 이러한 기존의 문제점을 해결하기 위해 다양한 도메인 환경에서 필요로 하는 작업레벨의 아바타 행위를 생성, 제어할 수 있는 3D 아바타 행위 편집기를 제안하고자 한다. 본 편집기를 통해서 사용자는 아바타 객체를 직접 조작하여 원하는 작업레벨 행위를 생성하고, 생성된 행위는 표준 아바타형식인 H-anim을 지원하는 XML 스크립트로 저장되어 모든 애플리케이션에서 제약 없이 사용할 수 있다. 또한 저장된 스크립트의 간단한 파라미터 조작만으로 새로운 행위를 생성할 수 있으므로 스크립트의 재사용이라는 측면에서 효과적이다.

  • PDF

아바타 행위에 대한 작업레벨 표현 및 제어기법 (Task-level Representation and Control Technique for Avatar Behavior)

  • 김재경;오재균;임순범;최윤철
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (B)
    • /
    • pp.520-522
    • /
    • 2004
  • 최근 인터넷의 발달과 더불어 사이버 공간을 이용한 활용 분야가 나날이 발전하고 있으며 이중 아바타 활용기술 분야도 그 중의 하나이다. 그러나 현재 아바타 행위 표현 및 제어에는 체계적이고 표준적인 접근 방식이 결여되어 있어 아바타 행위 표현의 어려움이 있는 실정이다. 본 논문에서는 다양한 도메인 환경에서 아바타의 제어를 보다 쉽게 하기 위해 아바타 행위 표현의 계층적인 접근 방식을 제안하였다. 먼저 작업레벨에서는 특정 도메인에서 필요한 작업을 수행하기 위한 행위들을 정의하고 이들은 도메인 환경에 종속되지 않는 일반적인 아바타의 상위 레벨의 모션들을 이용하여 수행된다. 마지막 단계인 하위레벨 모션에서는 표준기반의 아바타 구조인 H-ANIM에 따라 아바타의 각 부분을 제어한다. 이와 같은 접근 방식을 통하여 사용자 측면에서 보다 쉽게 아바타의 행위를 제어할 수 있으며, 표준형식(XML)언어를 이용하여 확장 및 호환이 가능하다. 향후 연구로는 아바타의 작업 입력을 위한 사용자 인터페이스 개발 및 아바타와 도메인 환경내의 객체간의 상호작용을 통한 아바타 제어기법 등이 요구된다.

  • PDF

XML을 이용한 휴머노이드 아바타 채팅 시스템 (Humanoid Avatar Chatting System using XML)

  • 김계숙;이만형;황대훈;박규석
    • 한국멀티미디어학회:학술대회논문집
    • /
    • 한국멀티미디어학회 2003년도 춘계학술발표대회논문집
    • /
    • pp.811-816
    • /
    • 2003
  • VRML은 애니메이션을 구현하기 위한 구문을 기본적으로 제공하고 있으나, 몇 가지 문제점을 가지고 있다. 우선 아바타 데이터와 애니메이션 데이터의 완벽한 분리가 불가능하고 데이터가 종속적이어서, 어느 한 쪽의 수정이 가해질 경우 다른 데이터도 그에 맞춰 수정해 주어야 한다. 이러한 기존 VRML의 단점을 극복하기 위해, 아바타 데이터와 애니메이션 데이터를 XML 기반의 행위기술 언어를 정의하고. 이 언어로 작성된 데이터를 처리하기 위한 애니메이션 시스템의 연구가 필요하다. 이러한 행위기술 언어는 아바타 데이터와 애니메이션 데이터를 서로 독립적으로 분리시킬 수 있어야 하며, 또한 아바타 데이터의 수정이 전제되어도 재활용이 가긍한 애니메이션 데이터를 작성하는 것이 가능해야 한다. 이에 본 연구에서는 아바타 관련 표준화 동향과 VRML로 정의된 휴머노이드 아바타의 문제점을 정의하고. 이를 극복하기 위한 방안으로 휴머노이드 아바타의 외형을 H-Anim 표준에 따르는 계층적 구조로 정의하였다 또한 휴머노이드 아바타의 행위 및 표정을 XML DTD와 DI로 정의하고, XML로 정의된 휴머노이드의 외형/행위/표정을 기존의 VRML 브라우저에서 표현하기 위한 처리 방법 덴 시스템을 설계하고 구현하였다. 끝으로 위와 같이 설계된 결과를 아바타 채팅 시스템의 구현에 적용하여 연구결과의 타당성을 검증하였다.

  • PDF

Studies on Maturation In Vitro of Rat Follicular Oocytes and Fertilizatin in Vitro of Cumulus-Removed and Intact Oocytes after Maturation

  • Kim, C.K.;Chung, Y.C.;Park, J.W.;Yoon, J.T.;Kim, H.T.
    • 한국가축번식학회지
    • /
    • 제12권2호
    • /
    • pp.120-124
    • /
    • 1988
  • Rat oocyte-cumulus complexes were cultured in verious media in order to induce maturation division in vitro. When the complexes were cultured in mKRB containing estrous rat serum (ERS) and FCS of 5% instead of BSA higher proportions(83.3 and 86.7%) of oocytes matured to metaphase II in 20h compared to control(75%) and t도 maturation rates in mKRB plus FCS were generally higher than those in mKRB plus ERS. Fertilization and early cleavage rates in vitro of the intact oocytes matured in mKRB containing BSA and FCS were generally higher than those of cumulus-removed oocytes and these rates were higher in mKRB containing 5% FCS than those in mKRB containing BSA. These results indicate that maturation rate in vitro was greatly increased by the addition of FCS instead of BSA to mKRB solution and the presence of cumulus cells around oocytes prior to sperm insemintion may be responsible for the increase of in vitro fertilization and early cleavage rates.

  • PDF

Effects of Expander Operating Conditions on Nutrient Digestibility in Finishing Pigs

  • S.L., Traylor;K.C., Behnke;J.D., Hancock;R.H., Hines;S.L., Johnston;B.J., Chae;In K., Han
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권3호
    • /
    • pp.400-410
    • /
    • 1999
  • Five experiments were conducted using finishing pigs (PIC L326 sires $\times$ C15 dams) to examine the effects of expander operating conditions on nutrient digestibility in finishing pigs. The effects of different expanding conditions (0, 11.7, 24.4, $32.5kg/cm^2$) for corn-SBM based diets (Exp. 1), wheat meddlings diet (Exp. 2), sorghum-SBM based diets (Exp. 3) and wheat-SBM based diet (Exp. 4). Exp. 5 was conducted as a $2{\times}4$ factorial arrangement and factors examined were 2 soy products (raw soybean and SBM) and 4 expanding conditions (0, 14.1, 28.1, $42.2kg/cm^2$). In experiment 1, total production rates (p>0.10) were similar among treatments. The amount of fines decreased (cubic effect, p<0.001) as cone pressure was increased from 0 to $11.7kg/cm^2$, with smaller differences as cone pressure was further increased to $35.2kg/cm^2$. Nutrient digestibilities increased (p<0.02) as the feed was subjected to higher cone pressures. Digestibilities of DM, N, and GE were maximized at $24.4kg/cm^2$ cone pressure. The DE of the diet expanded at 24.4 and $35.2kg/cm^2$ increased by 172 and 109 kcal/kg, respectively, compared to the diet processed at $0kg/cm^2$ cone pressure. In experiment 2, total production and screened pellets production rates were similar among the processing treatments (p>0.21). The amount of fines decreased (quadratic effect, p<0.03) by 9 kg/h as cone pressure was increased from 0 to $11.7kg/cm^2$. Digestibilities of DM (p<0.02), N (p<0.001), and GE (p<0.002) were increased as cone pressure was increased from 0 to $35.2kg/cm^2$. DM, N, and GE digestibility in the pigs fed the midds-based diet increased by 8, 13, and 10%, respectively, at the highest processing cone pressure compared to the diets without any cone pressure. In experiment 3, the conditioned mash moistures for the treatments were numerically similar around 15% moisture. As the expander cone pressure was increased from 0 to $11.7kg/cm^2$, energy consumption for the pellet mill decreased (quadratic effect, p<0.004) from 14.1 to 12.0 kWh/t. Dry matter and gross energy digestibility increased (cubic effects, p<0.006) as cone pressure was increased from 0 to $35.2kg/cm^2$ with the largest improvement occurring as cone pressure was increased from 0 to $11.7kg/cm^2$. Nitrogen digestibility increased (cubic effect, p<0.001) from 78.3 to 81.0% as the feed was subjected to the higher cone pressures, with N digestibility being maximized at $24.4kg/cm^2$ cone pressure. The DE of the diet increased (cubic effect, p<0.001) by 225 kcal/kg as cone pressure was increased from 0 to $11.7kg/cm^2$. In experiment 4, pellet moisture decreased and moisture loss increased as cone pressure was increased from 0 to $35.2kg/cm^2$. Also, starch gelatinization of the wheat-based diets increased from 16.8 to 49.1% as the diets were processed at 0 and $35.2kg/cm^2$ cone pressure. Nutrient digestibilities were not affected (p>0.18) by any increase in cone pressure. In experiment 5, pellet moisture decreased as cone pressure was increased 0 to $35.2kg/cm^2$. The amount of moisture loss for the diets expanded at $42.2kg/cm^2$ was 3.0 and 3.8% for the SBM and raw soybean (RB) diets, respectively. Starch gelatinization for the SBM diets were 19% greater than the RB diets. The RB diets had lower DM, N and GE digestibilities as compared to the SBM diets. The DE of the RB diets were lower (p<0.02) than the SBM diets. DM (p<0.06), N (p<0.02), and GE (p<0.001) digestibilities of the dietary treatments increased as cone pressure was increased 0 to $42.2kg/cm^2$.

아바타 작업레벨 행위 생성을 위한 행위 모델링 및 편집기 구현 (Modeling and Implementation of Avatar Motion Editor and for Creating of Task-level Behavior)

  • 김가영;김재경;오재균;임순범;최윤철
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2003년도 추계학술발표논문집 (상)
    • /
    • pp.609-612
    • /
    • 2003
  • 최근 3D 가상환격에서 아바타를 활용한 분야가 많은 관심을 받고 있으며, 아바타를 이용함으로써 사람들의 흥미를 효과적으로 이끌어 낼 수 있다는 장점을 가진다. 현재 이러한 아바타의 행위를 생성하고 제어하기 위해 모션캡쳐 장비를 이용하거나 3D MAX와 같은 전문 그래픽 편집툴, 혹은 자체 개발된 특정 어플리케이션등을 사용하고 있다. 그러나 이와 같은 기존 환경은 비용이 많이 들거나 생성된 아바타 행위의 활용이 특정 어플리케이션 환경에 국한되어 재사용이 어려운 단점이 있다. 본 연구에서는 이러한 기존의 문제점을 해결하기 위해 다양한 도메인 환경에서 필요로 하는 작업레벨의 아바타 행위를 생성, 제어할 수 있는 3D 아바타 행위 편집기를 제안하고자 한다. 본 편집기를 통해서 사용자는 아바타 객체를 직접 조작하여 원하는 작업레벨 행위를 생성하고, 생성된 행위는 표준 아바타형식인 H-anim을 지원하는 XML 스크립트로 저장되어 모든 애플리케이션에서 제약 없이 사용할 수 있다. 또한 저장된 스크립트의 간단한 파라미터 조작만으로 새로운 행위를 생성할 수 있으므로 스크립트의 재사용이라는 측면에서 효과적이다.

  • PDF

인간 친화적 설계 시스템을 위한 디지털 인체 모델 구성 연구 (Digital Human Modeling for Human-centered CAD System)

  • 정문기;이건우;조현덕;김태우;;이상헌
    • 한국CDE학회논문집
    • /
    • 제12권6호
    • /
    • pp.429-440
    • /
    • 2007
  • The purpose of this research is to develop the Human-centered CAD system in which human factors can be considered during the design stage. For this system there are several issues to research, like the digital human modeling technology, the definition of interactions between human and product, the simulation of human motion when using the product, and the bio-mechanical analysis of human, etc. This paper introduces how to construct the kinematical structure of the digital human model. For our digital human model H-ANIM, the international specification of humanoid animation is referenced. And we added the skeleton geometry and the skin surfaces to our model. And it can manipulate its joints by forward kinematics. Also the IKAN inverse kinematics algorithm is adopted to support the posture prediction of the digital human model in the product environment. All of these ideas are implemented using CAD API so that we can apply these functions to the current commercial CAD systems. In this manner, the human factor issues can be effectively taken into account at the early design phase and the costs of bio-mechanical evaluation will be significantly reduced.