• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.60-68
• /
• 1997

Rayleigh Scattering Cross Sections($\sigma$i) of various gases and the temperature distributions of premixes C3H8/O2 flame are measured by high power KrF(248nm) Exci- mer laser and ICCD camera. Results show that $\sigma$i of O2 and Propane(C3H8) gases agree well in the 5% error range, but of H2 has the more or less difference from the calcul- ated value by other groups. This is attributed to the low RS signal of H2 to Nosie level(S/N ratio). The temperature distributions of flame range out between 300K in the air and about 2000K in the burned area. In this temperature range, out system has the about 250K temperature resolution. Because low RS signals in the reaction area with high temperature are affected highly by noises, temperature uncertainty of this area is relatively high to another part of flame. Experimental results show that UV Rayleigh Scattering can be used for the measurement of mixing ratio of mixed gases and the temperature distributions of flame. Especially, this technique can be applied for the measurement of the mixing ratio of air/fuel before the ignition and the flame structure after the ignition inside the Engine.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.3
• /
• pp.213-221
• /
• 2002

Activated carbons with high surface area of 2,600 $m^{2}/g$ and high pore volume of 1.2 cc/g could be prepared by KOH activation of rice hulls at a KOH:char ratio of 4:1 and $850^{\circ}C$. In order to increase the adsorption capacity of hydrogen sulfide, which is one of the major malodorous component in the waste water treatment process, various contents of $Na_{2}CO_{3}$ and $KIO_{3}$ were impregnated to the rice-hull activated carbon. The impregnated activated carbon with 5 wt.% of $Na_{2}CO_{3}$ showed improved $H_{2}S$ adsorption capacity of 75 mg/g which is twice of that for the activated carbon without impregnation and the impregnated activated carbon with 2.4 wt.% of $KIO_{3}$ showed even higher $H_{2}S$ adsorption capacity of 97 mg/g. The improvement of $H_{2}S$ adsorption capacity by the introduction of those chemicals could be due to the $H_{2}S$ oxidation and chemical reaction with impregnated materials in addition to the physical adsorption of activated carbon.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.311-324
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for three quarrying planes and three rock cleavages was performed using the parameters such as (1) reduction ratio between the value of spacing and the value of length, (2) microcrack spacing frequency(N), (3) total spacing($1mm{\geq}$), (4) exponential constant(a), (5) magnitude of exponent(${\lambda}$), (6) mean spacing($S_{mean}$), (7) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$) and (8) density of spacing. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The discrimination factors representing three quarrying planes and three rock cleavages were acquired through these mutual contrast. The analysis results of the research are summarized as follows. First, the reduction ratios of frequency(N), mean value, median value, the above difference value($S_{mean}-S_{median}$) and density for three rock cleavages are in orders of G(grain, (G1 + G2)/2) < H(hardway, (H1 + H2)/2) < R(rift, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R and H < G $\ll$ R. The values of the above five parameters for three planes show the various orders of R'(rift plane) $\ll$ H'(hardway plane) < G'(grain plane), R' $\ll$ G' < H', R' < H' < G', R' < G' < H' and R' $\ll$ H' < G', respectively. Second, the values of (I) parameters(2, 3, 4 and 5) and (II) parameters(6, 7 and 8) are in orders of (I) H < G < R and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Third, to review the overall characteristics of the arrangement among the six diagrams, these diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, above six diagrams can be summarized in order of rift(R1 + R2) < grain(G1 + G2) < hardway(H1 + H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, two parameters for each diagram, the above difference value($S_{mean}-S_{median}$) and mean spacing, could provide advanced information for prediction the order of arrangement among the diagrams. Finally, the general chart for three planes and three rock cleavages were made. From the related chart, three exponential straight lines for three rock cleavages show an order of R(R1 + R2) < G(G1 + G2) < H(H1 + H2). On the contrary, three lines for three planes show an order of H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1). Consequently, correlation of the mutually reverse order between three planes and three rock cleavages can be drawn from the related chart.

• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.355-359
• /
• 2006

Fine silica powders were synthesized via w/o emulsion method using sodium silicate, ammonium sulfate, Triton N-57, and cyclohexane as silica source, precipitating agent, surfactant, and oil phase, respectively. The powders were prepared under a conventional process and an ultrasonic process using the same reactants at room temperature for 1 hr varying the concentration of $Na_2SiO_3$ solution and the mol ratio of $H_2O$/surfactant, respectively. The particle size of the silica powder was reduced with decreasing the concentration of sodium silicate solution and with increasing the mol ratio of $H_2O$/surfactant under with and without ultrasounds. The size of powder with ultrasounds was smaller than that without ultrasounds, which indicates that the application of ultrasound in the synthesis of silica powder is an efficient way to reduce particle size.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.133-134
• /
• 2007

• Journal of ILASS-Korea
• /
• v.3 no.4
• /
• pp.35-42
• /
• 1998

Laser Raman scattering method has been applied to measure equivalence ratio of methane/air and propane/air mixture in constant volume combustion chamber. We used high power KrF excimer laser$(\lambda=248nm)$ and a high gain ICCD camera to capture low intensity Raman signal. Raman shifts and Ram cross-sections of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4\;and\;C_3H_8$ were measured precisely. Our results showed an excellent agreement with other groups. Mole fraction measurement of $O_2\;and\;N_2$ from air showed that $O_2\;:\;N_2$ = 0.206 : 0.794. We used constant volume combustion chamber and gas injector which is operated at $5\sim10barg$. Methane and propane are used as a fuel. 50 Raman signal are obtained and ensemble averaged for measurement of equivalence ratio. Our measured results showed that the equivalence ratio of fuel/air mixture is reasonable at ${\pm}5%$ error range.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1355-1357
• /
• 1997

In this study, the ferrite/rubber composite microwave absorbers mixed Ni-Zn ferrite and $Ni_2Y$ ferroxplana were prepared in order to control matching condion. The variation of the material constants($\dot{\varepsilon}$, $\dot{\mu}$) and microwave absorbing characteristics were investigated with various ferrite mixing ratio. The material constants of ferrite/rubber composite microwave absorber could be controlled by variation ferrite mixing radio. The matching frequency and thickness could be controlled with various ferrite mixing ratio.

• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.20-25
• /
• 1995

This experiment was attempted to improve ethanol productivity by immobilization of Kluyveromyces marxianus FO43 using Jerusalem artichoke powder. Sucrose medium was used to determine optimum conditions for cell immobilization. The optimum conditions were alginate concentration of 2%, bead size of 2 mm, a particle input ratio of 30 : 100, cultivation period of 24 hours, and substrate concentration of 10%(w/v). The immobilized cells produced the high concentrations of ethanol at pH $4.5{\sim}6.5$ and $30{\sim}45^{\circ}C$, broader ranges of pH and temperatures than those of free cells. Under optimum conditions the immobilized cells showed ethanol concentration of 46.4 g/L and productivity of 1.93 g/L.h. The microphotograph using a two phase contrast microscope showed that immobilized cells cultivated under the optimum conditions were densely populated toward the surface area of beads.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1140-1142
• /
• 1993

It has been prepared by a coprecipitation method for Ferroxplana $Ni_2Y\;(Ba_2Ni_2Fe_{12}O_{22}$ magnetic particles, which is one of the Hexagonal ferrite. The coprecipitates were synthesized by adding aqueous solution of $BaCl_2{\cdot}2H_2O,\;NiCl_2{\cdot}6H_2O\;and\;FeCl_2{\cdot}4H_2O$ (of which the mole ratio is $Ba^{2+}:Ni^{2+}:Fe^{2+}$=1:1:6) to a mixture of NaOH and $Na_2CO_3$ solution. The shape of Ferroxplana $Ni_2Y$ magnetic particles obtained at the calcined temperature 1,100($^{\circ}C$) was hexagonal plate-like, average particle size was 2(${\mu}m$), and aspect ratio was more than 7.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.33-39
• /
• 2017

This study was carried out in order to closely examine the growth and the physiological response by shading levels of a container seedling of Daphniphyllum macropodum which is known as the species of having shade tolerance in a warm temperature evergreen broad-leaved tree. The shading treatment was regulated with the shading level of full sunlight, and 35%, 55%, 75% of full sunlight. As a result of surveying the height and the root collar diameter growth by the shading level, the height was the highest with 13.2 cm under 35% of shading. The root collar diameter was the highest with 4.99 mm under full sunlight. The organ-based (leaves, shoot and root) dry mass production and the whole dry mass production were higher with 1.38 g, 0.47 g, 0.87 g, 2.72 g, respectively, in order of 35% shading. As for chlorophyll a, b, and the total chlorophyll content, the highest chlorophyll content was shown under 75% of shading with the relatively highest shading level. The ratio of chlorophyll a to chlorophyll b (a/b) was the highest under 35% of shading. The photosynthetic rate, stomatal conductance and water use efficiency were the highest with $12.3{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$, $0.27molH_2O{\cdot}m^{-2}{\cdot}s^{-1}$, $3.53{\mu}molCO_2{\cdot}mmol^{-1}H_2O$, respectively, under 35% of shading. As a result of surveying the whole experiment, D. macropodum grows nicely by maintaining 35% shading.