• Transactions of Materials Processing
• /
• v.24 no.4
• /
• pp.234-240
• /
• 2015

Multi-pass shape drawing is very important to produce steel profiles in round samples. In the current study, a process design system is developed for a multi-pass shape drawing. In general, the number of passes for a multi-pass shape drawing is 2 to 3 when the reduction ratio, drawing stress, and productivity are considered. Therefore, calculating the drawing stress and designing the intermediated die shapes are very important. In order to calculate the drawing stress, a shape drawing load prediction method is proposed using a general axisymmetric drawing load prediction model. An intermediate die shape design method is proposed using the initial and the final product shapes. Based on this analysis, a process design system is developed for multi-pass shape drawing for steel profiles. The system works with AutoCAD. The system was applied to design a shape drawing of a spline.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2173-2180
• /
• 2006

Linux has peculiarities of safety, flexibility, and open source. and Linux supports various hardware platforms. But because general Linux was designed for high performance H/W, Linux has several points to support for embedded system with limited resource. Specially, a main point is booting time that is spent to tens of second. In this paper, we purpose a fast booting scheme of Linux for Embedded System and estimate a performance of scheme purposed through realized prototype. Specially, to reduce booting time in environment of embedded system, we optimize boot loader, kernel and root file system. As a result, boot time reduce 28 second to 11 second in HBE-EMPOS II.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.395-401
• /
• 2004

In the current high network-centralized computing and enterprising environment, it is getting essential to transmit data reliably at very high rates. Until now previous client/server model based NFS(Network File System) or AFS(Andrew's Files System) have met the various demands but from now couldn't satisfy those of the today's scalable high-performance computing environment. Not only performance but data sharing service redundancy have risen as a serious problem. In case of NFS, the locking issue and cache cause file system to reboot and make problem when it is used simply as ip-take over for H/A service. In case of AFS, it provides file sharing redundancy but it is not possible until the storage supporting redundancy and equipments are prepared. Lustre is an open source based cluster file system developed to meet both demands. Lustre consists of three types of subsystems : MDS(Meta-Data Server) which offers the meta-data services, OST(Objec Storage Targets) which provide file I/O, and Lustre Clients which interact with OST and MDS. These subsystems with message exchanging and pursuing scalable high-performance file system service. In this paper, we compare the transmission speed of gigabytes file between Lustre and NFS on the basis of concurrent users and also present the high availability of the file system by removing more than one OST in operation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1027-1035
• /
• 2000

In this paper, we have proposed the optimum technique for wireless ATM (WATM) error control in indoor environment. As the optimum technique, the conventional concatenated FEC only is regarded as the efficient error control method for time-critical ATM traffic in AWGN, and the pilot symbol-added fading compensation with the concatenated FEC is required to optimize the WATM performance in fading environment. Also, the truncated Type- H hybrid ARQ technique will be developed for quality-critical ATM traffic in order to improve its throughput. Therefore, this paper presents the optimization of WATM performance in indoor environment by means of evaluating above techniques using theoretical analysis and simulation.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.289-295
• /
• 2018

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.437-444
• /
• 2000

In this paper, we propose a method that directly converts 3D CAD files for handheld phones designed by a commercial CAD S/W, PATRAN, to FDTD modeling with 1mm resolution. To qualify the accuracy of this method, we compared the calculation of radiation pattern using 3D transient far zone transformation with the measured results by gain comparison method in anechoic chamber and the difference is less than 0.5 dB. The calculation of magnetic field distributions on the front of handheld phones has been done to find a factor contributes to SAR. The result showed up the H-field in the width direction of the phone gives more dominant effect than the field in the length or inside to the front direction.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.205-208
• /
• 2008

In this paper, we have measured and compared the optical and electrical characteristics of LED(light emitting diode) and CNT(carbon nano-tube) lightings. Especially, the IES format files are used for each of the luminaire LlD(luminous intensity distribution) analysis and light level simulation for analyze the maximum, minimum, and average light level. In the future, when CNT and the LED based lighting technology standards are writing, this data will be used in judging.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.250-253
• /
• 2007

In hot strip rolling, the work roll profile is one of the main factors in predicting and correcting the strip profile. Various studies concerning the wear profile and the thermal crown of work roll have been performed, and the results of these studies have shown that the work roll profile must be predicted accurately so as to efficiently control the strip qualities such as thickness, crown, flatness, and camber. Therefore, a precise prediction model of roll profile is called for in a perfect shape control system. In this paper, a genetic algorithm was applied to improve on the roll profile prediction model in hot strip rolling. In this approach, the optimal design problem is formulated on the basis of a numerical model so as to cover the diverse design variables and objective functions. A genetic algorithm was adopted for conducting design iteration for optimization to determine the coefficient of the numerical model for minimization of errors in the result of the calculated value and the measured data. A comparative analysis showed a satisfactory conformity between them.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.1
• /
• pp.5-12
• /
• 2004

Soft foundation is extensively distributed in coastal areas including our local regions. Embankment load on such soft foundation causes displacement due to lack of base ground supports. Long-term consolidation can result in settlement and destruction of shear failure and structure. Therefore, a variety of vertical drain methods are applied to construction sites to prevent base from breaking and changing for secure construction. This study analyzed the patterns of changes displacement to determine efficient range of improvement since range of vertical drain material determines vertical and horizontal changes based on the width range of under ground improvement. Changes of intensity with distance from embankment edge were also analyzed in the field study of embankment slope.

• The Journal of Society for e-Business Studies
• /
• v.9 no.4
• /
• pp.137-155
• /
• 2004

A video-conference system is being utilized in web based application services in various fields due to the widespread use of Internet and the progress of computer technologies. This system should use the public IP address for sharing file and white board and it is difficult to manage the internal network users of the firewall and non-public IP address users. In this paper, we propose an Application Level Gateway which transforms non-public IP address into public IP address. This mechanism is for the internal network users of the firewall or non-public IP address users over the Internet. We also propose a Control Daemon which manages video and audio media dynamically according to network bandwidth. This mechanism can start and terminate a video conference and manage the process of the video conference.