• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.521-528
• /
• 1996

Recently, higher speed optical disk drives including computer CD-ROM drives tend to be increasingly demanded to read or write the enormous volume of digital data. To this end, both structure and controller designs of the optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design namedH${\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulations are performed to demonstrate the robustness with appropriate performance specifications being satisfied. In addition, as the implementation issue of it, procedures of temporal discretization as well as model reduction of the controller are also addressed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.502-508
• /
• 2001

In this paper, slack is computed from a comparison of the cable pay out rate and the ship ground speed in accordance with laying conditions, and the speed controller of the cable engine based on an H(sub)$\infty$ servo control id designed for adjusting the cable engine in order to lay a desired amount of slack. The controller is designed for robust tracking of the cable engine under disturbances. The performance of the designed controller is evaluated by computer simulation, and, consequently, a feasibility study for laying the submarine cable stably is done through analyzing simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.21-21
• /
• 2000

In this paper, we design the state feedback gain using linear matrix inequality(LMI) to the multiobjective synthesis, in the magnetic bearing system with integral type servo system. The design objectives can be a H$\_$$\infty$/ performance, asymptotic disturbance rejection, time-domain constraints, on the closed-lnp pole location. To the end, we investigated the validity of the designed controller through results of simulation.

• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.79-85
• /
• 1999

The magnetic levitation system is utilized in the magnetic bearing of high-speed rotor system because of little friction, no lubrication, no noise and so on. The magnetic levitation system needs the feedback controller for the stabilization of system, and gap sensors are generally used to measure the gap. The use of sensor easily goes into troublesome caused by sensor failure discord between the measurement point and the control point etc. This paper gives a controller design method of magnetic levitation system which satisfies the given $H_{\infty}$ control performance and the robust stability of the presence of physical parameter perturbations. To the end, we investigated the validity of the designed controller through results of simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1882-1892
• /
• 1996

This paper is concerned with the position control of the ond degree-of freedom manipulator using pneumatic artificial muscle actuator which is built to have a proper compliance. For t his pneumatic artificial muscle actuator though, it is difficult to make an effective control scheme due to the nonlinearity and uncertainties on the dynamics of the actuator. In this paper, a third-order equation of motion is derived for the actuator including the dynamics of the pneumatic servovalve. Later, various modeling uncertainties due to the nonlinearity and unmodeled dynamics of the servo vlave and the actuator are taken care of, as a trade-off between the closed-loop performance of the controlled system and its robustness to uncertainties. A controller using .mu. synthesis thchnique is designed, and robust performance against measurement noise, various modeling uncertainties due to the dynamics of the servo valve and actuator is achieved. The effectiveness of the proposed control methods is illustrated through simulations and experiments.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.62-69
• /
• 1999

This paper presents a design method of dynamic positioning control system(DPS) for floating Platform with rotatable and retractable thrusters using H$\infty$ servo control design method. The norm band of uncertainty is captured by multiplicative perturbation between nominal model and reduced order model. A controller robust to the uncertainty is designed applying H$\infty$ synthesis. The control law satisfying robust stability and nominal performance condition is determined through the mixed sensitivity approach. The control algorithm was evaluated on the basis of computer simulation for a proposed DPS design method and experiments was carried out with an image processing method for measurement of DPS position in a water tank The results of overall experiments show that proposed control method will be good to keep at a specified position. And they are compared with the experimental results by LQG synthesis and H$\infty$ optimal control design method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.4
• /
• pp.349-349
• /
• 1996

The ship's propulsion efficiency depends upon a combibation of engine and propeller. The propeller has better efficiency as the engine has lower rotational speed. This situation led the engine manufacures to design the engine that has lower speed, longer stroke and a small number of cylinders. With this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variations of the delay-time and the parameter perturbation especially in low speed engine. In this study we consider the perturbations of the engine parameters as the modeling uncetainties and design a robust speed controller for marine medium speed diesel engine by means of $ extit{H}_{infty}$control theory having the central solution. By comparing the results of the robust speed controller with those of mechanical governor and PID controller, the validity of the robust speed controller under parameter variations is confirmed. The speed control of the experimental diesel engine of carried out using actuator which is composed of PWM signal generator and D.C servo motor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.10 s.103
• /
• pp.1148-1159
• /
• 2005

In this paper, the various uncertainties generated in an optical disk drive (ODD) and the robust servo designs considering the uncertainties are studied. First, the brief introduction an ODD and the servo error tolerance of it are discussed. Then, the classifications of uncertainty and the concept of relative stability are introduced. Considering the uncertainty of an ODD, two robust control approaches are applied: (i) mixed sensitivity approach in H$\infty$ control theory for unstructured uncertainty, (ii) QFT for structured uncertainty Finally, the designed controllers are realized by DSP, and these controllers are applied to a commercial DVD-ROM drive. From these experiments, we prove that the designed robust controllers have more good disturbance rejection performance and robustness when it is compared to the conventional lead-lag controller.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.1
• /
• pp.46-58
• /
• 1997

The energy saving is one of the most important factors for profit in marine transportation. In order to reduce the fuel oil consumtion the ship's propulsion efficiency must be increased as possible. The propulsion efficiency depends upon a combination of an engine and a propeller. The propeller has better efficiency as lower rotational speed. This situation led the engine manufacturers to design the engine that has low speed, long stroke and a small number of cylinders. Consequently, the variation of rotational torque became larger than before because of the longer delay-time in fuel oil injection process and an increased output per cylinder. As this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variation of the delay-time and the parameter perturbation. In this paper we consider the delay-time and the perturbation of engine parameters as the modeling uncetainties. Next we design the robust servo controller which has zero offset in steady state engine speed, based on H sub($\infty$) control theory. The validity of the controller was investigated through the response simulation. We used a personal computer and an analog computer as the digital controller and the engine (plant) part respectively. And, we could certify that the designed controller maintains its robust servo performance even though the engine parameters may vary.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1212-1219
• /
• 2009

In this paper, a state feedback gain controller using linear matrix inequality(LMI) for the multi-objective synthesis is designed, in the multi-layer structure with integral type servo system. The design objectives include $H_{\infty}$ performance, asymptotic disturbance rejection, time-domain constraints, on the closed-loop pole location. The results of computer simulation show the validity of the designed controller.