• Journal of Life Science
• /
• v.26 no.8
• /
• pp.936-942
• /
• 2016

As the incidence of environmental diseases is increasing due to harmful environmental factors, there is a rising interest in developing eco-friendly materials for housing. In this study, we sought to develop antimicrobial interior fabric blind materials by employing ethanol extract of a medicinal plant Zanthoxylum piperitum DC. As determined by the disc diffusion method, the zones of inhibition of the pericarp ethanol extract at a concentration of 5 mg/disc against Klebsiella pneumoniae, Staphylococcus aureus, and Streptococcus mutans were 13.5±1.5 mm, 14.0±0.5 mm and 15.0±0.1 mm, respectively, whereas the leaf ethanol extract (5 mg/disc) against K. pneumoniae, S. aureus, and S. mutans were 12.8± 0.3 mm, 13.5±1.0 mm, and 12.0±0.1 mm, respectively. The IC₅₀ of the leaf ethanol extract against K. pneumoniae, S. aureus and S. mutans were about 0.5 mg/ml, 0.1 mg/ml and 1.0 mg/ml respectively. To examine whether the leaf ethanol extract possessing antibacterial activity of Z. piperitum DC can be applicable to production of antimicrobial fabric blind materials, the fabrics treated with either 1.0% or 2.0% of the leaf ethanol extract were tested for antibacterial activity against K. pneumoniae and S. aureus using International Standard Fabrics Test Method. The results indicate that the fabric treated with the ethanol extract of Z. piperitum DC possesses an excellent antimicrobial activity against both pathogenic bacteria. These results suggest that Z. piperitum DC may be applicable to producing functional fabrics which are effective in reducing the harmful bacterial factors in indoor environments.

• The Korean Journal of Mycology
• /
• v.19 no.1
• /
• pp.61-65
• /
• 1991

For the production of mycelia of mushroom by submerged culture, the experiment was carried out. mushroom. The optimum culture broth for Ganoderma lucidum NG-L were compo­sed of CMC 0.8%(w/v) and $(NH_4)_2SO_4$ 0.2%, with 10%(v/v) of inoculum size and pH 5.5 when the milk whey was used as basal medium. In case of Grifola frondosa ATCC48688, the optimum broth were composed of soluble starch 2%(w/v) and $KNO_3$ 0.l%(w/v), with 8%(v/v) of inoculum size and pH 5.2. Among several plant growth hormones,indole-3-acetic acid and gibberellin $A_3-3-acetate$ stimulated the mycelial growth of Ganoderma lucidum NG-L and Grifola frondosa ATCC 48688 respectively. The culture broth of these mushrooms inhibited the growth of B. subtilis and P. aeruginosa.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1551-1556
• /
• 2007

The objective of the research was to investigate the effect of polyethylene glycol (PEG) or urea supplementation in sheep and goats fed a basal diet of Acacia saligna and wheat straw. The 3 dietary treatments were: (1) Control: ad libitum A. saligna+ 400 g/d wheat straw (95% DM) (basal diet); (2) Basal diet+50 g/d PEG 4000; and (3) Basal diet+1% (on a DM basis) urea sprayed onto the straw and A. saligna 30 min prior to feeding. All animals maintained live weight, regardless of the dietary treatment. All sheep readily consumed the A. saligna in preference to straw. In sheep both DMD and OMD were higher (p<0.05) where PEG was included in the diet compared to the other two treatments. Contrary to findings by other researchers there was no significant difference in DMI, DMD or OMD between sheep and goats in corresponding treatment groups. All animals were in positive N balance. For both sheep and goats, rumen ammonia concentrations were increased with the use of either urea or PEG. In these groups the maximum ammonia concentrations exceeded 50 mg/L, considered the minimum required to maximise microbial growth. This threshold, however, was exceeded only for a period of 8-11 h. Of those measured, rumen ammonia levels were generally the highest at 4 h post feeding. None of the measurements of rumen ammonia for the control group approached 50 mg/L. It is unclear how and why feed intake and live weight were maintained when rumen ammonia levels were often sub-optimal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.350-356
• /
• 2019

Objective: To examine the regulatory effects of exercise on myokine expression in horse skeletal muscle cells, we compared the expression of several myokine genes (interleukin 6 [IL-6], IL-8, chemokine [C-X-C motif] ligand 2 [CXCL2], and chemokine [C-C motif] ligand 4 [CCL4]) after a single bout of exercise in horses. Furthermore, to establish in vitro systems for the validation of exercise effects, we cultured horse skeletal muscle cells and confirmed the expression of these genes after treatment with hydrogen peroxide. Methods: The mRNA expression of IL-6, IL-8, CXCL2, and CCL4 after exercise in skeletal muscle tissue was confirmed using quantitative-reverse transcriptase polymerase chain reactions (qRT-PCR). We then extracted horse muscle cells from the skeletal muscle tissue of a neonatal Thoroughbred. Myokine expression after hydrogen peroxide treatments was confirmed using qRT-PCR in horse skeletal muscle cells. Results: IL-6, IL-8, CXCL2, and CCL4 expression in Thoroughbred and Jeju horse skeletal muscles significantly increased after exercise. We stably maintained horse skeletal muscle cells in culture and confirmed the expression of the myogenic marker, myoblast determination protein (MyoD). Moreover, myokine expression was validated using hydrogen peroxide ($H_2O_2$)-treated horse skeletal muscle cells. The patterns of myokine expression in muscle cells were found to be similar to those observed in skeletal muscle tissue. Conclusion: We confirmed that several myokines involved in inflammation were induced by exercise in horse skeletal muscle tissue. In addition, we successfully cultured horse skeletal muscle cells and established an in vitro system to validate associated gene expression and function. This study will provide a valuable system for studying the function of exercise-related genes in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.8
• /
• pp.1141-1149
• /
• 2014

The present study was conducted to investigate a supplemental effect of magnesium hydrogen phosphate (MHP, $MgHPO_4$) as an alternative phosphorus (P) source on growth and feed utilization of juvenile far eastern catfish (Silurus asotus) in comparison with three conventional P additives (monocalcium phosphate (MCP), dicalcium phosphate (DCP) and tricalcium phosphate [TCP]) as positive controls. A basal diet as a negative control was prepared without P supplementation and four supplemental P sources were added at the level of 2%. Five groups of 450 fish having mean body weight of 11.3 g following 24 h fasting after three week adaptation period were randomly distributed into each of 15 tanks (30 fish/tank). Fish were hand-fed to apparent satiety twice a day for 8 weeks. Fish fed MHP had weight gain (WG), protein efficiency ratio and specific growth rate comparable to those fed MCP. Fish fed MHP and MCP had feed efficiency (FE) significantly higher (p<0.05) than those fed DCP. Fish groups fed control and TCP showed the lower FE than the other groups which was significantly different (p<0.05) from those of fish fed the other diets. Survival rate was not significantly different (p>0.05) among treatments. Fish fed control had the lowest hematocrit, which was significantly different (p<0.05) from that of fish fed MHP. Fish fed MCP and MHP had plasma P higher (p<0.05) than fish fed the other diets. Relative efficiencies of MCP, DCP and TCP to MHP were found to be 100.5 and 101.3%, 92.0 and 91.6%, and 79.1 and 80.9% for WG and FE, respectively. P availability was determined to be 88.1%, 75.2%, 8.7%, and 90.9% for MCP, DCP, TCP, and MHP, respectively. Consequently, MHP recovered from wastewater stream showed that as an alternative P source its performance was comparative with MCP on growth and feed utilization of juvenile far eastern catfish.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.4
• /
• pp.448-453
• /
• 2006

Porous Co-P catalysts electroplated on Cu in chloride based solution with an addition of $NaH_2PO_2$ and glycine were developed for hydrogen generation from alkaline $NaBH_4$ solution. The microstructures of the Co-P catalysts and their hydrogen generation properties were analyzed as a function of cathodic current density and plating time during the electrodeposition. Amorphous Co-P electrodeposits with porous structure was formed on Cu at cathodic current density of $0.05\;A/cm^2$, and showed very high hydrogen generation rate in alkaline $NaBH_4$ solution due to an increase in the surface area of the catalyst as well as the catalytic activity. The Co-P catalyst, which was obtained at cathodic current density of $0.05\;A/cm^2$ for 5 min, exhibited the best hydrogen generation rate of 2290 ml/min.g-catalyst in 1 wt. % NaOH+10 wt. % $NaBH_4$ solution at $30^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.40-46
• /
• 2006

A bacterial strain producing high level of a phytase was isolated from cattle feces and identified as Bacillus subtilis, and designated as Bacillus sp. CF 5-26. The production of the phytase from Bacillus sp. CF 5-26 reached the highest level after 72 hours at $37^{\circ}C$. The optimum condition of the media for the production of phytase was 10% rice bran extract, 0.1% whey protein powder, $0.01%\;CaCl_{2},\;0.01%\;KH_{2}PO_4$. The phytase was purified 20.3 folds with ethanol precipitation, Sephadex G-100, CM Sepharose CL-6B and Sephacryl S-100-HR column chromatography. The molecular weight of the purified enzyme was estimated to be 66 kDa on SDS-polyacrylamide gel electrophoresis. The purified phytase activity was stable up pH 5.0, 7.0, 11.0 and the remaining activity was 50% when it was treated at $100^{\circ}C$ for 1 hour. The substrate specificity of phytase was most active against sodium phytate and inositol polyphosphate compound. And the phytase hydrolysed tripolyphosphate and pyrophosphate a little. The Km value for the sodium phytate was 0.64 mM and the Vmax value was $4.41\;{\mu}mol/min$.

• Korean Journal of Pharmacognosy
• /
• v.37 no.2 s.145
• /
• pp.67-73
• /
• 2006

The butanol extracts of Agrimonia pilosa (BAP) induced dose-dependent vascular relaxation of phenylephrine-precontracted aorta, which was abolished by removal of functional endothelium. Pretreatment of the endothelium-intact aortic tissues with $N^G$-nitro-L-arginine methyl ester (L-NAME) and 1H-[1,2,4]-oxadiazole-[$4,3-{\alpha}$]-quinoxalin-1-one(ODQ) inhibited the relaxation induced by BAP. BAP-induced vascular relaxation was also markedly attenuated by addition of verapamiI, while the relaxant effect of BAP was not blocked by indomethacine, glibenclamide, tetraethylammonium (TEA), atropine, or propranolo. In addition, incubation of endothelium-intact aortic rings with BAP increased the vascular production of cGMP. These results suggest that BAP relaxes vascular smooth muscle via endothelium-dependent nitric oxide/cGMP signaling pathway, which may be causally related with L-type $Ca^{2+}$ channels.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.508-516
• /
• 2011

Hydrotreated biodiesel(HBD) is paraffinic bio-based liquid, with the chemical structure $C_nH_{2n+2}$, originating from vegetable oil(the process can also be applied to animal fat). The oil or fat is treated in a number of process, the most important being hydrogenation, in order to create a bio-based liquid diesel fuel. During the hydrogenation, oxygen is removed from the triglyceride and converted into water. Propane is formed as a by product and can be combusted and used for energy production. HBD can be used in conventional diesel engines, pure or blended with conventional diesel, due to its similar physical properties to diesel. This study reports the quality characteristics with chemical and physical properties as an alternative diesel fuel. Especially, HBD showed higher cetane value and number than FAME, and it is consisted of $C_{15}$ - $C_{18}$ n-paraffinic compounds. We also describes quality characteristics of HBD blends(2, 5, 10, 20, 30, 40, 50 vol%) in automotive diesel. HBD blends(max. 20 vol%) were the limit by the Korean specification due to poor low temperature characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1206-1209
• /
• 2005

In recent, injection molding process for features in sub-micron scale is under active development as patterning nano-scale features, which can provide the master or stamp for molding, and becomes available around the world. Injection molding has been one of the most efficient processes for mass production of the plastic product, and this process is already applied to nano-technology products successfully such as optical storage media like DVD or BD which is a large area plastic thin substrate with nano-scale features on its surface. Bio chip for like DNA sequencing may be another application of this plastic substrate. The DNA can be sequenced using order of 100 nm pore structure when making the DNA flow through the pore structure. Agarose gel and silicon based chip have been used to sequence the DNA, but injection molded plastic chip may have benefit in terms of cost. This plastic DNA sequencing chip has plenty of pillars in order of 100 nm in diameter on the substrate. When the usual features in case of DVD or BD have very low aspect ratio, even less than 0.5, but the DNA chip will have relatively high aspect ratio of about 2. It is not easy to injection mold the large area thin substrate with sub-micron features on its surface due to the characteristics of the molding process and it becomes much more difficult when the aspect ratio of the features becomes high. We investigated the effect of the molding parameters for injection molding with high aspect ratio nano-scale features and injection molded some plastic DNA sequencing chips. We also fabricated PR masters and Ni stamps of the DNA chip to be used for molding