• 제목/요약/키워드: H2 production

검색결과 697건 처리시간 0.021초

Antioxidant activity of 3,5-dicaffeoyl-epi-quinic acid (DEQA) from the halophyte Atriplex gmelinii

  • Hojun Kim;Chang-Suk Kong;Youngwan Seo
    • 한국응용과학기술학회지
    • /
    • 제41권2호
    • /
    • pp.447-458
    • /
    • 2024
  • In this study, the antioxidizing effect of 2,3-dicaffeoyl-epi-quinic acid (DEQA) was investigated. The antioxidant activity was evaluated by measuring the scavenging effect on DPPH radical and peroxynitrite and the reducing power on ferric ion. DEQA showed a scavenging effect and reducing power comparable to vitamin C used as a positive control. Also, DEQA effectively inhibited production of intracellular reactive oxygen species (ROS) in HT-1080 cells, showing the scavenging ratio of 43.8% even at 10 µM concentration of DEQA after 2 hours in HT-1080 treated with H2O2. In addition to this, DEQA inhibited the production of nitric oxide (NO) very effectively in Raw 264.7 cells. The above results suggest that DEQA has the potential to be developed as a natural antioxidant.

Fabrication of Ni-Mo-based Electrocatalysts by Modified Zn Phosphating for Hydrogen Evolution Reaction

  • Im, Han Seo;Park, Seon Ha;Ha, Hyo Jeong;Lee, Sumin;Heo, Sungjun;Im, Sang Won;Nam, Ki Tae;Lim, Sung Yul
    • Journal of Electrochemical Science and Technology
    • /
    • 제13권1호
    • /
    • pp.54-62
    • /
    • 2022
  • The preparation of low-cost, simple, and scalable electrodes is crucial for the commercialization of water electrolyzers for H2 production. Herein, we demonstrate the fabrication of cathodes through Mo-modified Zn phosphating of Ni foam (NiF) for water electrolysis, which has been largely utilized in surface coating industry. In situ growth of electrocatalytically active layers in the hydrogen evolution reaction (HER) was occurred after 1 min of phosphating to form ZnNiMoPi, and subsequent thermal treatment and electrochemical activation resulted in the formation of ZnNiMoPOxHy. ZnNiMoPOxHy exhibited superior HER performance than NiF, primarily because of the increased electrochemically active surface area of ZnNiMoPOxHy compared to that of bare NiF. Although further investigations to improve the intrinsic electrochemical activity toward the HER and detailed mechanistic studies are required, these results suggest that phosphating is a promising coating method and will possibly advance the fabrication procedure of electrodes for water electrolyzers with better practical applications.

광전기화학적 수소 발생 전지의 연구 개발 현황 (Photoelectrochemical Water-Splitting Cells for H2 Production)

  • 안광순
    • 한국진공학회지
    • /
    • 제18권5호
    • /
    • pp.331-336
    • /
    • 2009
  • 본 고에서는 광전기화학적 수소 ($H_2$) 발생 전지의 연구 개발 현황을 소개한다. 이를 통해 water-splitting 전지의 기본 원리를 이해하고 기술적 문제점 및 국내외 연구 현황, 향후 개발 동향 등을 살펴본다.

홍조류(Kappaphycus alvarezii)의 동시 당화 발효를 이용한 바이오에탄올의 생산 (Bioethanol Production from Seaweed Kappaphycus alvarezii by Simultaneous Saccharification and Fermentation)

  • 라채훈;김성구
    • 한국미생물·생명공학회지
    • /
    • 제44권2호
    • /
    • pp.145-149
    • /
    • 2016
  • 해조류 중 홍조류인 K. alvarezii로부터 동시 당화 발효(SSF)를 위한 효소 당화 및 균 배양 온도를 검토하고, 기존의 동시 당화 발효(SSF) 를 개선하기 위해 2단계 동시 당화 발효(SSF)를 수행하였다. 효소 당화와 균 성장 온도를 고려하였을 때 동시 당화 발효(SSF)에 적용하는 배양 온도는 40°C를 선택하여 실험을 진행하였다. 비순치 효모(wild type)와 고농도 갈락토오스에 순치한 효모(adapted yeast to galactose)를 이용한 동시 당화 발효(SSF)를 실시한 결과 발효 156시간에 9.1 g/l의 에탄올 수율(YEtOH) 0.24와 10.2 g/l의 에탄올 수율(YEtOH) 0.27을 나타내었다. 이러한 기존의 동시 당화 발효(SSF)를 개선한 2단계 동시 당화 발효(SSF)는 에탄올 생산 수율이 0.27에서 0.35로 27.5% 증가하였으며, 에탄올 발효 시간도 156시간에서 96시간으로 61.5% 감소하였다. 이러한 연구결과는 해양 바이오매스인 해조류로부터 바이오연료 생산과정에 있어 기초적인 정보를 제공할 것이다.

인간 각막상피세포에서 미세먼지로 인한 세포 손상을 완화할 수 있는 유익한 한약재의 탐색 (Exploration of Beneficial Herbal Medicines to Attenuate Particulate Matter-induced Cellular Injury in Human Corneal Epithelial Cells)

  • 김다혜;김민영;황보현;지선영;박세광;박성호;김미영;최영현
    • 생명과학회지
    • /
    • 제32권8호
    • /
    • pp.647-658
    • /
    • 2022
  • 미세먼지는 유해한 다양한 작은 입자를 가진 대기오염 물질로서 산화적 및 염증성 반응을 촉진하여 다양한 질환의 발병과 진행에 관여하는 것으로 알려졌다. 본 연구에서는 외부 오염물질에 직접적으로 노출되는 1차 노출 기관인 안구를 미세먼지로부터 보호할 수 있는 약재를 선정하기 위해, 인간 각막상피세포에서 후보 약물들의 방어 효능을 평가했습니다. 그 결과, 12종의 후보 약재 중 PM2.5에 의한 세포 독성 억제효능을 보인 후보 약재 5가지(천문동, 석창포, 황련, 감국 및 금잔화)를 선별하였다. 이들 후보 물질들의 항산화 활성을 평가하기 위하여 ROS 소거능을 조사한 결과, 석창포, 천문동 및 황련 추출물이 유의한 효과를 나타내었으며, 이는 미토콘드리아 활성 보존 효능과 다소 연관성이 있었다. 또한, 이들은 PM2.5에 의한 DNA 손상을 차단할 수 있었음을 8-OHdG 생성 및 γ-H2AX 발현 분석을 통하여 확인하였다. 본 연구의 결과는 PM2.5에 대한 각막상피세포의 보호 신규 천연물의 탐색을 위한 자료로 활용될 것이다.

Statistical Optimization of Biosurfactant Production from Aspergillus niger SA1 Fermentation Process and Mathematical Modeling

  • Mansour A. Al-hazmi;Tarek A. A. Moussa;Nuha M. Alhazmi
    • Journal of Microbiology and Biotechnology
    • /
    • 제33권9호
    • /
    • pp.1238-1249
    • /
    • 2023
  • In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E24) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35℃, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E24 (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and µmax (0.0306) for biosurfactant yield was Yp/s (1.87) and Yp/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

Preparation of 27Ni6Zr4O143M(M=Mg, Ca, Sr, or Ba)O/70 Zeolite Y Catalysts and Hydrogen-rich Gas Production by Ethanol Steam Reforming

  • Kim, Dongjin;Lee, Jun Su;Lee, Gayoung;Choi, Byung-Hyun;Ji, Mi-Jung;Park, Sun-Min;Kang, Misook
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권7호
    • /
    • pp.2073-2080
    • /
    • 2013
  • In this study the effects of adding alkaline-earth (IIA) metal oxides to NiZr-loaded Zeolite Y catalysts were investigated on hydrogen rich production by ethanol steam reforming (ESR). Four kinds of alkaline-earth metal (Mg, Ca, Sr, or Ba) oxides of 3.0% by weight were loaded between the $Ni_6Zr_4O_{14}$ main catalytic species and the microporous Zeolite Y support. The characterizations of these catalysts were examined by XRD, TEM, $H_2$-TPR, $NH_3$-TPD, and XPS. Catalytic performances during ESR were found to depend on the basicity of the added alkaline-earth metal oxides and $H_2$ production and ethanol conversion were maximized to 82% and 98% respectively in 27($Ni_6Zr_4O_{14}$)3MgO/70Zeolite Y catalyst at $600^{\circ}C$. Many carbon deposits and carbon nano fibers were seen on the surface of $30Ni_6Zr_4O_{14}$/70Zeolite Y catalyst but lesser amounts were observed on alkaline-earth metal oxide-loaded 27($Ni_6Zr_4O_{14}$)3MO/70Zeolite Y catalysts in TEM photos after ESR. This study demonstrates that hydrogen yields from ESR are closely related to the acidities of catalysts and that alkaline-earth metal oxides reduce the acidities of 27($Ni_6Zr_4O_{14}$)3MO/70Zeolite Y catalysts and promote hydrogen evolution by preventing progression to hydrocarbons.

Effect of feed restriction on the maintenance energy requirement of broiler breeders

  • da Silva Teofilo, Guilherme Ferreira;Lizana, Rony Riveros;de Souza Camargos, Rosiane;Leme, Bruno Balbino;Morillo, Freddy Alexander Horna;Silva, Raully Lucas;Fernandes, Joao Batista Kochenborger;Sakomura, Nilva Kazue
    • Animal Bioscience
    • /
    • 제35권5호
    • /
    • pp.690-697
    • /
    • 2022
  • Objective: This study aimed to evaluate the effect of the ad libitum and restricted feeding regimen on fasting heat production (FHP) and body composition. Methods: Twelve Hubbard broilers breeders were selected with the same body weight and submitted in two feeding regimes: Restricted (T1) with feed intake of 150 g/bird/d and ad libitum (T2). The birds were randomly distributed on the treatments in two runs with three replications per treatment (per run). The birds were adapted to the feed regimens for ten days. After that, they were allocated in the open-circuit chambers and kept for three days for adaptation. On the last day, oxygen consumption (VO2) and carbon dioxide production (VCO2) were measured by 30 h under fasting. The respiratory quotient (RQ) was calculated as the VCO2/VO2 ratio, and the heat production (HP) was obtained using the Brower equation (1985). The FHP was estimated throughout the plateau of HP 12 hours after the feed deprivation. The body composition was analyzed by dual-energy X-ray absorptiometry scanning at the end of each period. Data were analyzed for one-way analysis of variance using the Minitab software. Results: The daily feed intake was 30 g higher to T2 (p<0.01) than the T1. Also, the birds of the T2 had significatively (p<0.05) more oxygen consumption (+3.1 L/kg0.75/d) and CO2 production (+2.2 L/kg0.75/d). That resulted in a higher FHP 359±14 kJ/kg0.75/d for T2 than T1 296±17.23 kJ/kg0.75/d. In contrast, the RQ was not different between treatments, with an average of 0.77 for the fasting condition. In addition, protein and fat composition were not affected by the treatment, while a tendency (p<0.1) was shown to higher bone mineral content on the T1. Conclusion: The birds under ad libitum feeding had a higher maintenance energy requirement but their body composition was not affected compared to restricted feeding.

Solid-State Ball-Mill Synthesis of Prussian Blue from Fe(II) and Cyanide Ions and the Influence of Reactants Ratio on the Products at Room Temperature

  • Youngjin Jeon
    • 대한화학회지
    • /
    • 제68권2호
    • /
    • pp.82-86
    • /
    • 2024
  • This paper presents the solid-state synthesis of insoluble Prussian blue (Fe4[Fe(CN)6]3·xH2O, PB) in a ball mill, utilizing the fundamental components of PB. Solid-state synthesis offers several advantages, such as being solvent-free, quantitative, and easily scalable for industrial production. Traditionally, the solid-state synthesis of PB has been limited to the reaction between iron(II/III) ions and hexacyanoferrate(II/III) complex ions, essentially an extension of the solution-based coprecipitation method to solid-state reaction. Taking a bottom-up approach, a reaction is designed where the reactants consist of the basic building blocks of PB: Fe2+ ions and CN- ions. The reaction, with a molar ratio of Fe2+ and CN- corresponding to 1:2.8, yields PB, while a ratio of 1:6.6 results in a mixture of potassium hexacyanoferrate(II) (K4Fe(CN)6), potassium chloride (KCl), and potassium cyanide (KCN). This synthetic approach holds promise for environmentally friendly methods to synthesize multimetallic PB with maximum entropy in nearly quantitative yield.

Exchange Coupling in Massively Produced Nd2Fe14B+Fe3B Nanocomposite Powders

  • Yang, Choong Jin;Park, Eon Byung;Han, Jong Soo;Kim, Eung Chan
    • Journal of Magnetics
    • /
    • 제9권2호
    • /
    • pp.27-33
    • /
    • 2004
  • Magnetic properties of $Nd_4Fe_{77.5}B_{18.5}$ compound in term of exchange coupling between $Nd_2Fe_{14}B$ and $Fe_3B$ magnetic nano crystals in melt spun powders were characterized by varying the quenching speed in mass production line. The exchange coupled phenomenon was characterized as functions of nano crystal size and volume fraction of each magnetic phase which was possible by employing Henkel plot (${\delta}M$) and refined Mossbauer spectroscopy. The optimized magnetic properties obtained from the present volume production line were: $B_r= 11.73 kG,{_i}H_c/ = 3.082 kOe$, and $(BH)_{max} = 12.28 MGOe.$ The volume fraction of each magnetic phase for those conditions giving the grain size of 10 nm were ${\alpha}-Fe; 4.2%, Fe_3B; 60.1 %$, and $Nd_2Fe_{14}B; 35.7%$. The superior magnetic properties in the $Nd_2Fe_{14}Fe_3B$ based nanocomposites were confirmed to be dependant on the volume fraction of $Fe_3B$.