• Applied Biological Chemistry
• /
• v.32 no.2
• /
• pp.104-108
• /
• 1989

A 2.5 ton scale of solar energy concentration blast-grain circulation dryer (SECD) was developed in order to shorten the drying time without damaged paddy. Comparative experiments were carried out on performance, drying efficiency, consistency in moisture content, milling recovery, grade of milled rice, and energy requirement and cost against all that of in-bin drying and storage (IBDS) method. The experiments were performed using mixture of several rice varieties of Tongil type(Japonica-Indica breeding type) under the autumn weather in Korea. The circulating air temperature inside SECD was $4{\sim}5^{\circ}C$ higher than that of IBDS. The moisture content of the paddy during the drying period in SECD was uniform while substantially varied in upper, middle or bottom layer in IBDS. By SECD, 24% initial moisture content of paddy was reduced to 15% after only 3 days of drying as compared to 14 days at IBDS. The percentage of cracked kernels in upper, middle and bottom layers in IBDS was 6, 6 and 12%, respectively, whereas 7% in all layers in SECD. Both types of dryers did not significantly affect the milling recovery of dried paddy and grade of milled rice. Energy requirement of SECD(28.8Kw/2.5ton) for paddy drying was much less than that of IBDS(108Kw/2.5ton).

• Journal of Embryo Transfer
• /
• v.16 no.2
• /
• pp.117-125
• /
• 2001

Vitrification of oocytes has been applied recently fur pigs, but remains elusive. The purpose of this study is to investigate the effects of vitrification in open pulled straws (OPS) on in vitro survival of porcine oocytes. When immature follicular oocytes frozen-thawed were cultured for in vitro maturation, maturation rates to metaphase-II stage were higher in oocytes with (25%) than without (15%) cumulus cells. After In vitro fertilization of oocytes frozen-thawed, the maturation rates were also significantly (P<0.05) higher in oocytes with (41%) that than without (17%) cumulus cells. However, the penetration rates were higher in oocytes without (19%) that than with (9%) cumulus. In another experiment, porcine oocytes matured in vitro were frozen and thawed for in vitro fertilization. The penetration rates were higher than in oocytes without (35%) that than with (26%) cumulus cells. However, the proportions of oocytes dead after in vitro fertilization were significantly (P<0.05) higher in oocytes with that than without cumulus cells. On the other hand, the rates of penetration and dead oocytes at 6 h after in vitro fertilization were not significant differences between oocytes with and without cumulus cells. However, the proportions of dead oocytes with (18%) and without (16%) cumulus cells were higher than in oocytes of control group (0%). These finding indicated the possible broader application for OPS, as they demonstrated that the maturation and fertilization in vitro by frozen-thawed oocytes may be accompained by cumulus cells and culture periods according to the requirements of the survival ability after freezing of mature and immature oocytes in pigs.

• Korean Journal of Poultry Science
• /
• v.31 no.2
• /
• pp.101-108
• /
• 2004

This study was conducted to evaluate the effect of iron reinforcing agent on the performance in laying hens for seven weeks. One hundred ninety eight 30-wk-old Brown Tetran layers were assigned to 9 treatments: control containing 45 mg Fe from iron sulfate per kg diet (FE-45), FE-90 (control multiplied two times), FE-180 (control multiplied four times), YM-45 containing 45mg Fe from yeast mutant, YM-90 (YM-45 multiplied two times), YM-180 (YM-45 multiplied four times), YF-45 containing 45mg Fe from ferritin containing yeast, YF-90 (YF-45 multiplied two times), YF-180 (YF-45 multiplied four times) in the experiment. Each treatment had four replications of 6 birds each. In the average egg production, the YF-180 was highest and the FE-45 (the control) was lowest; the YM-180, YF-90, and YF-180 were significantly (P＜0.05) higher than the control. In the comparisons of egg weight and egg mass, the YF-180 was significantly higher (P＜0.05) than the FE-90 or the control. In the FCR, the YM-90 was highest and the YF-45 was lowest. There was no significant difference between the control and YM-90 although the YF-45 was significantly (P＜0.05) lower in FCR than the control. In the eggshell thickness, the YF-180 was the thickest and the FE-90 was the thinnest; the YF-45 or the YF-180 was significantly thicker (P＜0.05) than the control. In the eggshell strength, the YF-45 was the strongest and the YM-45 was the weakest; the YM-90, YF-45, and YF-180 were significantly stronger (P＜0.05) than the control. In the cholesterol level of egg yolk, the control (FE-45) was the highest and the YF-45 was the lowest; there was a significantly different (P＜0.05) between these two treatments. In conclusion, in case of adding organic iron to feed for layers, it gives improvement on performance of layers and develop chemical composition of eggs.

• Korean Journal of Poultry Science
• /
• v.31 no.2
• /
• pp.93-100
• /
• 2004

This study was conducted to evaluate the effect of organic iron supplemented to feed for broilers. One hundred forty four Ross broiler chicks were assigned to 6 treatments: control containing 80mg Fe from iron sulfate per kg diet(FE-80), FE-160 (control multiplied two times), YM-80 containing 80mg Fe from yeast mutant, YM-160 (YM-80 multiplied two times), YF-80 containing 80mg Fe from ferritin containing yeast, YF-160 (YF-80 multiplied two times) in the experiment. Each treatment had four replications of 6 birds each. The weight gain of the YM-160 was significantly higher (P＜0.05) than that of the control (FE-80). The YM and YF in the serum cholesterol level were significantly higher (P＜0.05) than the control. In the cholesterol level of carcass, although the control (FE-80) was highest and the YM and YF were very low; however, there were no significant differences among treatments. In the iron level of carcass, the control (FE-80) showed the lowest level among treatments; the YM and YF were significantly higher (P＜0.05) than the control. In conclusion, the supplementation with organic iron to broiler chicks improve productivity. We also expect the possibility on chicken meat with reinforcing iron.

• Korean Journal of Weed Science
• /
• v.18 no.3
• /
• pp.179-185
• /
• 1998

This study was conducted to investigate changes in weed occurrence and dominance as affected by seeding dates in water seeded rice paddy under field following two years of no-tillage condition. The pre-emergence weeds in no-tillage paddy were controlled by glyphosate application at 7 days before seeding. The rice seeds were seeded on April 20, May 10 and May 30, respectively with 40kg/ha of seeding rate. The weed species in the paddy occurred included three species (Echinochloa cursgalli, Aneilma keisak, Ottelia alismoides) of annual weed, one species (Alopecurus aequalis) of biennial weed and five species (Eleocharis kuroguwai, Leersia japonica, Sagittaria pygmaea, Sagittaria trifolia, Potamogeton distinctus) of perennial weed respectively. Aneilma keisak was found to be dorminant on April 20 and May 10 but Eleocharis kuroguwai on May 30 based on number of weeds. The number and dry weight of weeds occurred were higher on May 10 as compared to in other seeding dates, while proportion of perennial weeds increased as the seeding date was delayed. In particular, weed dorminance varied marketly with seeding date. The Simpson's indices were 0.736 on April 20, 0.261 on May 10 and 0.281 on May 30, respectively.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.533-540
• /
• 1995

Attenuation correction is important in producing quantitative positron emission tomography (PET) images. Conventionally, photon attenuation effects are corrected using transmission measurements performed before tracer administration. The pre-injection transmission measurement approach may require a time delay between transmission and emission scans for the tracer studies requiring a long uptake period, about 45 minutes for F-18 deoxyglucose study. The time delay will limit patient throughput and increase the likelihood of patient motion. A technique lot performing simultaneous transmission and emission scans (T+E method) after the tracer injection has been validated. The T+E method substracts the emission counts contaminating the transmission measurements to produce accurate attenuation correction coefficients. This method has been evaluated in experiments using a cylindrical phantom filled with background water (5750 cc) containing $0.4{\mu}Ci/cc$ of F-18 fluoride ion and one insert cylinder (276 cc) containing $4.3{\mu}Ci/cc$. GE $Advance^{TM}$ PET scanner and Ge-68 rotating pin sources for transmission scanning were used for this investigation. Post-injection transmission scan and emission scan were peformed alternatively over time. The error in emission images corrected using post-infection transmission scan to emission images corrected transmission scan was 2.6% at the concentration of $1.0{\mu}Ci/cc$. No obvious differences in image quality and noise were apparent between the two images. The attenuation correction can be accomplished with post-injection transmission measurement using rotating pin sources and this method can significantly shorten the time between transmission and omission scans and thereby reduce the likelihood of patient motion and increase scanning throughput in PET.

• Korean Journal of Animal Reproduction
• /
• v.25 no.2
• /
• pp.163-169
• /
• 2001

OSBA(oocytes-sperm binding assay) is a tool developed for rapid test of optimal condition of IVF medium and protein source by binding ability of mouse sperm and egg. Mouse oocyte-cumulus complexes were prepared by removing of the cumulus cells with 0.1% hyaluronidase. 10$\pm$2 oocytes per 30 ${mu}ell$ medium drop were inseminated with 3 ${mu}ell$ sperm suspension and were cultured f3r 3 hours and 24 hours, respectively. And the oocytes were recovered gently and the No. of sperm bound on oocytes were counted. In the Exp. 1, the ratio of oocytes bound with one sperm at least were 60.2%(50/83), 2%(2/77) and 100%(79/79) in the medium with no protein, FBS(15%, v/v) and BSA(0.4%. w/v), respectively, Fetal bovine serum(FBS) seriously inhibited sperm binding on oocyte, although bovine serum albumin(BSA) promoted the binding ability. The inhibiting effect of FBS was dependent on the concentration of FBS. The sperm binding ability according to oocyte maturity was tested in the Exp. 2. There was no significant difference between Met. II (mature) and Met. I (intermediate mature) oocytes in the number of oocytes bound with sperm and the number of sperm bound on oocytes. Finally, in Exp. 3, two batches of Ham's F10 medium with good and poor quality by OSBA were tested (The ratios of embryos developed from PN 1-cell stage to hatched blastocyst; 25% vs. 70%). In the medium with good quality, sperm binding ability was significantly increased (P ＜ 0.05). The ratio of oocytes bound with one sperm at least was 66% and 90% in the medium with poor and good quality, respectively. Conclusively, It was possible to test IVF medium condition rapidly and easily by OSBA.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.147-156
• /
• 2006

This study was conducted to investigate natural distribution of aquatic plane and to find out natural aquatic plants which highly absorb nutrient N and P. We surveyed vegetation within ${\pm}2m$ from streamside in 12 tributaries of the West Nakdong river watershed during May to October in 2003. Hydrophytes surveyed in tributaries of the West Nakdong river watershed were 27 families, 61 genera, 76 species, 3 varieties. Major dominance species of aquatic plants were Z. latifolia, P. communis, P. thunbergii, P. arundinacea, P. japonica, and P. distichum var. indutum. Aquatic plants having high production ability of biomass were Z. latifolia, P. communis, P. arundinacea, P. japonica, and E. crus-galli var. echinata. In the vertical distribution of hydrophytes within streams, dominant species were P. thunbergii and P. japonica in the upper stream, but dominant species in the downstream were P. communis and Z. latifolia. Species diversity or aquatic, plants was reduced, but their biomass and nutrient (T-N and T-P) content per the natural area unit $(m^2)$ were increased in the downsteaam. Nutrient N and P content of aquatic plants per the natural area unit were high at Joman river, Pyeonggangcheon, Bulam drainage canal, and Hogyecheon. Fifty-seven species of aquatic plants having high biomass were grounped into 4 categories $(I{\sim}IV)$ according to their nutrient content per dry weight unit. I group $(T-N,\;\geqq20gkg^{-1}\;&\;P_2O_5,\;\geqq7gkg^{-1})$ was comprised of 3 submerged plants (H. verticillata, P. crispus, and C. demersum), e emergent plants (O. javanica, P. distichum var. indutum, and R. sceleratus), 1 suspended plant (T. japonica), and 1 riparian plant (A. lobatum). Otherwise, in classification of natural hydrophytes according to their nutrient content per natural area unit, Z. latifolia, P. communis, P. longiseta, P. arundinacea, and P. distichum var. indutum possessing great biomass productivity as emergent plants were included in I group $(T-N,\;\geqq1gm^{-2}\;&\;P_2O_5,\;\geqq0.7gm^{-2})$.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).