• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.311-316
• /
• 1997

The synthesis and characterization of the mononuclear group 13 heterocyclic carboxaldehyde methyldithiocarbazate complexes Me2M[NC5H4CRNNC(S)SCH3] (M=Al, R=H(1); M=Ga, R=H(2); M=Al, R=CH3(3); M-Ga, R=CH3(4); M=In, R=CH3(5)) are described. Compounds 1-5 were prepared by the reaction of MMe3 (M=Al, Ga, In) with 2-formy or 2-acetylpyridine-S-methyldithiocarbazate in toluene. These compounds 1-5 have been characterized by microanalysis, NMR (1H, 13C) spectroscopy, mass spectra, and single-crystal X-ray diffraction. X-ray single-crystal diffraction analyses reveal that 4-5 are mononuclear metal compounds with coordination number of 5 and N,N,S coordination mode.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.266-272
• /
• 2006

Numerous reports have evaluated the predictive ability of carcass probes for meat quality using measurements taken early postmortem or near 24 h. The intervening time period, however, has been largely ignored. In this study, the capacity of three probes [pH, electrical conductivity (EC), and grading probe light reflectance (GP)] to predict pork longissimus muscle quality (drip and cooking losses, Warner-Bratzler shear, $L^*$, n = 30) was evaluated at 45 min, 90 min, 3, 6, 12, 24, and 48 h postmortem. The strongest relationships were observed between cooking loss and 6 h EC and GP ($R^2$ = 0.66, 0.72), and $L^*$ and GP ($R^2$ = 0.57-0.66, 12-48 h). pH was most valuable early postmortem ($R^2$ = 0.63, 90 min with cooking loss). GP at 6 h most effectively ($R^2$ = 0.84) predicted a two factor (cooking loss+$L^*$) meat quality index. Results emphasize the predictive value of measures taken between 3 and 12 h postmortem.

• Laboraroty Animal Research
• /
• v.34 no.4
• /
• pp.216-222
• /
• 2018

The efficacy of standard therapeutic strategies for Helicobacter pylori (H. pylori) infection is decreasing over time due to the emergence of drug-resistant strains. As an alternative, the present study investigated the capacity of Lactobacilllus paracasei (L. paracasei) HP7, isolated from kimchi, to inhibit H. pylori growth. The effects of L. paracasei HP7 on H. pylori adhesion and H. pylori-induced inflammation were examined in AGS human gastric adenocarcinoma epithelial cells and a mouse model of H. pylori SS1 infection. L. paracasei HP7 reduced H. pylori adhesion to AGS cells and suppressed the inflammatory response in infected cells by downregulating interleukin-8. H. pylori colonization in the stomach of C57BL/6 mice was demonstrated by rapid urease test, and results showed significant decrease in mice post-treated with L. paracasei HP7. Additionally, L. paracasei HP7 decreased gastric inflammation and epithelial lesions in the stomach of H. pylori-infected mice. These results demonstrate that L. paracasei HP7 treatment can inhibit H. pylori growth and is thus a promising treatment for patients with gastric symptoms such as gastritis that are caused by H. pylori infection.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.247-251
• /
• 2005

In this the study, the effects of the manufacturing process conditions on the properties Thick and Thin Diameter yarns(TTD yarns) prepared with hot plate device in the draw winder were determined. Physical properties including wet shrinkage, tenacity and elongation of the samples were measured and thick and thin effect was analysed with the evenness tester. The results were as the follows: There was little change the wet shrinkage of the TTD yarns in the range of $70^{\circ}C{\sim}80^{\circ}C$ of $R_1$ temperature(lower hot cylinder) with the same Hot Plate(H/P) temperature, but the wet shrinkage of the TTD yarns decreased 5-10% when $R_1$ temperature was $90^{\circ}C$. The wet shrinkage of the TTD yarns decreased with the H/P temperature at the same temperature of $R_1$. There was little effect of $R_1$ and H/P temperature on the tenacity of TTD yarns. The elongation of TTD yarns increased with $R_1$ temperature at the same H/P temperature. The elongation of TTD yarns increased little bit for the first time and then decreased above that temperature with increasing H/P temperature at the same $R_1$ temperature. The thick and thin effect on the TTD yarns was obvious in $110^{\circ}C$ of H/P temperature regardless of $R_1$ temperature, while there was no thick and thin effect on the TTD yarns in $140^{\circ}C$ of H/P temperature.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.193-208
• /
• 2021

The characteristics of the microcrack lengths(①), microcrack spacings(②) and Brazilian tensile strengths(③) related to the six directions of rock cleavages(H2~R1) in Geochang granite were analyzed. First, the 18 cumulative graphs for the above three major factors representing unique characteristics of the rock cleavages were made. Through the general chart for these graphs classified into three planes and three rock cleavages, the 28 parameters on the length, spacing and Brazilian tensile strength have been determined. The results of correlation analysis among these parameters are summarized as follows. Second, the above parameters were classified into six groups(I~VI) according to the sorting order on the magnitude of parameter values among three rock cleavages and three planes. The values of parameters belonging to group I and II are in order of R(rift) < G(grain) < H(hardway) and H < G < R. The values of the 8 parameters on the length of line(os₂, 𝚫s, 𝚫L and oS^mean), the exponent(λ_L^mean and λ_S^mean), the slope(a^mean) and the anisotropy coefficient (An^mean) are in order of R < G < H and H'(hardway plane) < G'(grain plane) < R'(rift plane). Third, the noticeable differences in distribution patterns among the six types of charts for three planes and three rock cleavages are as follows. From the chart for three planes, the values of 𝚫L, 𝚫s and 𝚫σ_t, corresponding to the distance between two points where the two fitting lines meet on the X-axis, increase in the order of R' < H' < G'. In particular, the two graphs of R2 and G2 related to the length and Brazilian tensile strength are almost parallel to each other and show the distribution characteristics of hardway plane. Among the graphs related to the Brazilian tensile strength, the overall shape for hardway plane is similar to that for grain. From the chart for three rock cleavages, the slopes of the graphs related to the length increase in the order of R < G < H, while those of the graphs related to the spacing and Brazilian tensile strength decrease in the order of R < G < H. Lastly, the characteristics of variation among the six rock cleavages, the three planes and the three rock cleavages were visualized through the correlation chart among the above parameters from this study.

• The Korean Journal of Pharmacology
• /
• v.23 no.2
• /
• pp.101-111
• /
• 1987

We investigated the binding properties of $(^3H)$ QNB and $(^3H)$ NMS to mAchR to elucidate the characterstics of mAchR in rat brain by using two different preparations (homogemates & intact brain cell aggregates). The binding properties of both ligands demonstrated high affinity and saturability in both experiments, however $(^3H)$ QNB showed a significantly higher maximal binding capacity than tha ot $(^3H)$ NMS 1. In rat brain homogenates; Displacement of both lignands with several mAchR antagonists resulted in competition curves in accoradnce with the law of massaction for QNB, atropine & scopolamine in thie preparation, also a similar profile was found for the quaternary ammonium analogs of atropine & scopolamine (methyl atropine & methylscopolamine) when $(^3H)$ NMS was used to label the receptors in rat brain. But when these hydrophillic antagonists were used to displace $(^3H)$ QNB, they showed interaction with high- and low-affinity binding sites in brain homogenates. Pirenzepine, the nonclassical mAchR antagonist, was able to displace both ligands from binding sites in this preparation. 2. In intact rat brain cell aggregates; Intact bain cell aggregates were used to elucidate the binding characteristics of $(^3H)$ NMS to mAchR in rat. The magnitude of binding of this ligand was related linearly to the amount of cell protein in the binding assay with a high ratio of total to nonspecific binding. mAchR antagonists displaced specific $(^3H)$ NMS binding according to the law of mass-action, while it was possible to resolve displacement curves using mAchR agonist into high-& low-affinity component. 3. Our results indicate that more hydrophilic receptor ligand $(^3H)$ QNB, displacement experiments in both tissues demonstrated that the lipid solubility of a particulr mAchR ligand might play an important role in determining its profile of binding to the mAchR, and the concentrations of mAchR in rat brain are both on the cell surface (membrane-bound receptor) and in the intracelluar membrane (intermembrane-bound receptor). 4. The results are discussed in terms of the usefulness of dissociated intact rat brain cells in studying mAchR in central nervous system.

• East Asian mathematical journal
• /
• v.28 no.2
• /
• pp.159-172
• /
• 2012

In all Mathematics I Textbooks(Kim, S. H., 2010; Kim, H. K., 2010; Yang, S. K., 2010; Woo, M. H., 2010; Woo, J. H., 2010; You, H. C., 2010; Youn, J. H., 2010; Lee, K. S., 2010; Lee, D. W., 2010; Lee, M. K., 2010; Lee, J. Y., 2010; Jung, S. K., 2010; Choi, Y. J., 2010; Huang, S. K., 2010; Huang, S. W., 2010) in high schools in Korea these days, it is written and taught that for a positive real number $a$, $a^{\frac{m}{n}}$ is defined as $a^{\frac{m}{n}}={^n}\sqrt{a^m}$, where $m{\in}\mathbb{Z}$ and $n{\in}\mathbb{N}$ have common prime factors. For that situation, the author shows his opinion that the definition is not well-defined and $a^{\frac{m}{n}}$ must be defined as $a^{\frac{m}{n}}=({^n}\sqrt{a})^m$, whenever $^n\sqrt{a}$ is defined, based on the field axiom of the real number system including rational number system and natural number system. And he shows that the following laws of exponents for reals: $$\{a^{r+s}=a^r{\cdot}a^s\\(a^r)^s=a^{rs}\\(ab)^r=a^rb^r$$ for $a$, $b$>0 and $s{\in}\mathbb{R}$ hold by the completeness axiom of the real number system and the laws of exponents for natural numbers, integers, rational numbers and real numbers are logically equivalent.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1564-1565
• /
• 2006

현재 전세계적으로 170kV급 이하의 초고압 지중케이블 접속함으로 기존의 현장몰드방식의 TMJ(Tape Molded Joint)와 부품조립방식의 PJ(Prefabricated Joint)보다 조립시간이 짧고 작업자의 숙련도가 높지 않아 경제적이며, 유지보수에 장점을 가진 고무몰드 접속함(PMJ)이 채용되고 있으며, 이러한 추세는 적용 전압급이 점차 상승하면서 230kV급까지 그 비중이 늘어나고 있는 경향을 보이고 있다. 당사에서는 이러한 추세에 발맞추어 154kV급 고무몰드접속함의 개발 당시의 Silicone의 기초물성시험 DATA 획득, 고무몰드 UNIT 및 금형 설계 기술 확립과 접속 공법 개발의 경험을 바탕으로 230kV급 고무몰드접속함의 개발에 성공하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.559-564
• /
• 2000

We studied to find out the effect of water temperature on the egg development of pearl oyster, Pincata fucata martensii and Pacific oyster, Crassostrea gigas. The optimum water temperatures for egg development were $20{\~}25^{\circ}C$ in P. fucata martensii and $15{\~}25^{\circ}C$ in C. gigas. The required time from fertilization to D-shaped lana was $41.7\;hours\;at\;20^{\circ}C$ and 27.5 hours at $25^{\circ}C$ in P. fucata martensii, and 35.3 hours at $15^{\circ}C$, 26.3 hours at $20^{\circ}C$ and 17.6 hours at$ 25^{\circ}C$ in C. gigas, respectively. The relationships between the water temperature ($WT:^{\circ}C$) and the required time (h: hour) from fertilization to each developmental stage were given as follows; P. fucata martensii Up to 8-cell $$1/h=0.0463WT-0.6945 (r^2=0.9702)$$ Up to morula $$1/h=0.0196WT-0.2184 (r^2=0.8118)$$ Up to trochophore $$1/h=0.0076WT-0.0802 (r^2=0.8756)$$ Up to D-shaped larva $$1/h=0.0031WT-0.0380 (r^2=0.9075)$$ C. gigas Up to 8-cell $$1/h=0.0210WT-0.1123 (r^2=0.9862)$$ Up to morula $$1/h=0.0143WT-0.1077 (r^2=0.9833)$$ Up to trochophore $$1/h=0.0052WT-0.0218 (r^2=0.9857)$$ Up to D-shaped lawn $$1/h=0.0029WT-0.0170 (r^2=0.9689)$$ Biological minimum temperature for egg development of P. fucata martensii and C. gigas was calculated as $$12.3^{\circ}C and 5.7{\circ}C$$, respectively.

• Journal of the Chungcheong Mathematical Society
• /
• v.30 no.1
• /
• pp.129-139
• /
• 2017

For a map $p:X{\rightarrow}A$, there are concepts of co-$H^p$-spaces, co-$T^p$-spaces, which are generalized ones of co-H-spaces [17,18]. For a principal cofibration $i_r:X{\rightarrow}C_r$ induced by $r:X^{\prime}{\rightarrow}X$ from $\imath:X^{\prime}{\rightarrow}cX^{\prime}$, we obtain some sufficient conditions to having extensions co-$H^{\bar{p}}$-structures and co-$T^{\bar{p}}$-structures on $C_r$ of co-$H^p$-spaces and co-$T^p$-structures on X respectively. We can also obtain some results about co-$H^p$-spaces and co-$T^p$-spaces in homology decompositions for spaces, which are generalizations of Golasinski and Klein's result about co-H-spaces.